November 2011

1. Installation Information Briefing for Venues November 2011 CAPTIVE MEDIA

2. Installation • Each unit is connected via two cables ducted from the back of the casing and through the wall panel into the wall space • 12v DC for power – via a power adaptor (safely secured) to a metal clad, RCD protected socket • Cat 5e data cable for internet connectivity – to an internet router (all cables numbered at both ends) • All in line with current NIC EIC regulations and Cat5e standards. • The site self-survey will establish the most suitable connection points and appropriate cable runs, which will be hidden wherever possible. • It will also confirm whether any pre-work is required (e.g. to hide cables where not wall cavity exists, or where a non-standard urinal is in place – see next page). Installation quotations are based on the site survey. At your request Captive Media can conduct the site survey. • Captive Media works with a long-established, national IT installation company to ensure the install is done to spec, and to guarantee service cover, with remote monitoring, 24/7 helpdesk and next-day call-out. They can also audit your existing IT infrastructure, if you choose. • No on-site commissioning is required. The units will start to play games and PTV content as soon as they are connected. • A typical 3 or 4 unit install is complete within a day – all that is required is uninterrupted access to the washrooms and any areas for cable runs. Isolated, wall mounted ‘power brick’ ~ 240v AC Mains connection point: 20 A RCD Switched Spur Internet connection point Cat 5 data cable 12 v DC Wall space

3. 5 – point installation requirement checklist  5 ticks? We’re all set!

4. Unit Dimensions and Positioning

5. Technical Specifications