1 / 25

WELCOME

WELCOME. Atharva College of Engineering Mumbai. ATHARVA COLLEGE OF ENGINEERING. Ground-Station Team. Project Guide : Prof. Mrs. Archana Chaudhari Student Members: Aniruddha Khadye Anuj Tiwari Divya Acharya Nikhil Joshi Nirali Khandhar Saurabh Sanghai Swarnkamal Singh Parmar

Download Presentation

WELCOME

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. WELCOME

  2. Atharva College of Engineering Mumbai ATHARVA COLLEGE OF ENGINEERING

  3. Ground-Station Team Project Guide: Prof. Mrs. ArchanaChaudhari Student Members: Aniruddha Khadye Anuj Tiwari DivyaAcharya Nikhil Joshi NiraliKhandhar Saurabh Sanghai Swarnkamal Singh Parmar Viral Shah

  4. Project Objectives • To setup an autonomous Ground Station at ACE • To retrieve TEC data operating on 437 MHz and 145 MHz • To receive Satellite Beacon on 145 MHz using VHF receiver. • To receive Satellite Telemetry data on 437Mhz using OOK UHF receiver • To log and analyze the data received • Student Outreach Program

  5. ACE Ground Station Break Up Our Ground-Station consists of 3 main parts: • Antenna Array • Rotor Mechanism • Processing Circuit

  6. Antenna DESIGN: • Parameters obtained from 4nec2 software. • Design was for 5 element 145 MHz Yagi-Uda antenna is shown. • 5 elements Yagi-Uda was selected for: • Better directivity • Better sensitivity • Low Bandwidth

  7. FABRICATION: • Antenna parameters obtained from NEC aren’t always practically realisable. • Values had to be rounded up to achievable margin and the resultant design was again simulated on the software. • Best possible parameters were selected based upon their practicality as well as fulfillment of specified criterion.

  8. Antenna Couplers & Boom

  9. Balun • Balun is also known as Quarter Wave Transformer. • It is used for impedance matching. • Length of balun is 1\4th of wavelength. • Practically, this value has to divided by velocity factor of the medium so as to account for different velocity of signal in different medium.

  10. Dipole Bending • Plane of polarization should be maintained while folding dipoles. • The distance between the folds of the dipoles have to be maintained. • For 437MHZ, a 7mm thick mild steel former was used. • For 145 MHz a 2 cm diameter wrought iron former was used. • Both these formers were customized in the ACE workshop.

  11. Why LMR 400? LMR 400 RG 214 Attenuation 8.57 dB/100m at 145 MHz 15.95 dB/100m at 437 MHz Max Operating Temperature: 75 ˚C Cost: INR 500/m • Attenuation: • 5 dB/100m at 145 MHz • 8.9 dB/100m at 437 MHz • Max Operating temperature: 85 ˚C • Cost: INR 85/m

  12. Why Antenna Rotator? • Dynamic Az/El trackingis a necessity for precision in readings and to avoid errors. • Manual tracking is not practical given the short Satellite pass duration , strength of signal being received & weight of antenna setup. • Though designing a rotor system is an option but you will need to take care of many factors • Water Proofing Motor framing • Wiring & Insulation • Wind load Considerations • Most importantly ACCURACY!! 4-Crossed Yagi-Uda Rotator Setup • Options Available • Yaesu G5500 • Hygain • Kenpro

  13. Good option : YaesuG-5500 • Specifications • Rotation Range: • Elevation: 180°0 • Azimuth: 450° • Maximum Vertical Load • :Elevation: 30 kg or less • Azimuth:. (200 kg) or less • Rotation Time (Non Loaded) • :Elevation (180°): 67 sec at 60 Hz • Azimuth (360°): 58 sec at 60 Hz • Comes with a controller which helps in interfacing with a PC based tracking software

  14. RCI-SE Board • Provides efficient control in both Azimuth and Elevation Planes • Compatible with most of the Antenna rotators available • This controller board takes care of all the Talking ! (Interfacing )between the PC –Software (Orbitron/Satscape ) and Antenna rotator(Yaesu G5500) • 5 relays (Azimuth and Elevation Control) • Left • Right • Up • Down • AUX, Brake or Speed control. RCI-SE Controller • Specifications: • 5 Relays • 2 x 8 Bit ADCs • LPT Interface Port

  15. Wouxunvs ADF WOUXUN- KGUVD1P ADF 7020 Sensitivity upto -118 dBm No inbuilt LNA or BFO VFO is not Field Programmable. Delicate , requires ESD protection. Powered by power supply. External peripheral components required. No license required. • Sensitivity upto -125 dBm • Inbuilt LNA & BFO. • Field Programmable VFO to offset satellite Doppler shift. • Rugged and Robust. • Powered by Li-ion battery. • Plug and play device. • Requires operating license

  16. WOUXUN KG UVD-1P ADF 7020

  17. LNA ZX 60 33 LN+ • Frequency 50- 3000Mhz • Noise figure; 1.1dB • Gain 20.5 dB • i/p VSWR 2:1 • o/p VSWR 1.6:1 • DC Supply Voltage 5V • Supply Current 70mA • Operating Temperature -40’C to 85’C

  18. AD 8302 • Polarization Measurement Kit (Phase and Gain Detector) • 2 Inputs from 1 Crossed Yagi • 2 Outputs to be given to µController

  19. CC 1020 • It is industrial grade Trans- receiver IC. • It is operational over a frequency band of 405MHz to 470 MHz and is tunable. • It’s power requirements are low (-118dbm) Signal received at Ground-station would be -110dbm. • It supports packet data transmission. • Maximum bit rate is 156.2 kbps which is much higher than our requirements.

  20. Satellite Tracking Software SATSCAPE: • Inbuilt WISP – DDE protocol to interface with compatible rotor system. (Yeasu G-5500) • Real time Tracking . • Built in Voice Alerts. • Wide range of satellites which can be tracked. • 3-D Graphic User Interface • It’s a FREEWARE !

  21. Objectives Achieved • Crossed Yagi antenna successfully designed, fabricated & characterized. • Power link budget implemented. • CC 1020 and AD 8302 ordered and procured. • Ground-Station Control Room set up. • Softwares like 4NEC2, Solid Works, Satscape, Smart RF Studio were studied and used.

  22. Experiments Conducted • AX.25 protocol studied using Slow Scan TV on commercial UHF Band . • Morse Code transmission/reception. • Radio Telescope was setup to monitor solar radiations. • Tracked ISS. • Radio propagation conditions were studied at the control room by setting up VHF/UHF monitoring station.

  23. Student Outreach Program ACE • Blog and Facebook profile was created to reach out to the students & interested people. • Blog: http://acegroundstation.blogspot.com/ • Facebook Profile Handle: Ace Satellite Ground-Station • Student Interactive Session was conducted.

  24. Thank You 

More Related