1 / 26

Network+ Guide to Networks, Fourth Edition

This chapter provides a step-by-step troubleshooting methodology for identifying and solving network problems. It covers how to identify symptoms and potential causes, establish what has changed, verify user competency, re-create the problem, and verify physical and logical integrity of network connections. It also discusses implementing action plans, testing results, identifying solution effects, documenting solutions, and preventing future problems.

wirtz
Download Presentation

Network+ Guide to Networks, Fourth Edition

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Network+ Guide to Networks, Fourth Edition Chapter 12 Troubleshooting Network Problems

  2. Troubleshooting Methodology • Steps for troubleshooting network problems: • Identify symptoms and potential causes • Identify affected area • Establish what has changed • Select most probable cause • Verify user competency • Re-create problem • Verify physical integrity of network connection • Verify logical integrity of network connection Network+ Guide to Networks, 4E

  3. Troubleshooting Methodology (continued) • Steps for troubleshooting network problems (continued): • Implement an action plan and solution and be prepared for all potential effects • Test the result • Identify results and effects of solution • Document solution and process Network+ Guide to Networks, 4E

  4. Establish What Has Changed • Questions to help pinpoint problems resulting from a network change: • OS or configuration on a server, workstation, or connectivity device changed? • New components added to server, workstation, or connectivity device? • Old components removed from server, workstation, or connectivity device? • New users or segments added to the network? • Server, workstation, or connectivity device moved from previous location to new location? Network+ Guide to Networks, 4E

  5. Select the Most Probable Cause: Verify User Competency • Ensure that human error is not source of problem • Problems caused by human error usually simple to solve • Best way to verify that a user is performing network tasks correctly is to watch them Network+ Guide to Networks, 4E

  6. Re-create the Problem • Try to reproduce symptoms both while logged on as the user who reported the problem and while logged on under a privileged account • Questions to help determine whether a problem’s symptoms are truly reproducible: • Make symptoms recur every time? • Make symptoms recur some of the time? • Symptoms happen only under certain circumstances? • Symptoms consistent no matter how many and which programs or files user has open? Network+ Guide to Networks, 4E

  7. Verify Physical Connectivity • Many network problems occur at Physical layer • Symptoms of Physical Layer problems: continuous or intermittent inability to connect to network and perform network related functions • Possible causes of Physical Layer problems: • Segment or network lengths exceeding IEEE maximum standards • Noise affecting wireless or wire-bound signal • Improper terminations, faulty connectors, loose connectors, or poorly crimped connections • Damaged cables • Faulty NICs Network+ Guide to Networks, 4E

  8. Implement an Action Plan and Solution Including Potential Effects • Scope: assess scope of solution before implementing • Tradeoffs: solution may restore functionality for one group of users, but remove it for others • Security: solution may inadvertently result in addition or removal of network access or resource privileges for a user or group of users • Scalability: does solution position network for additions and enhancements later on • Cost: if solution requires significant software or hardware cost, weigh options carefully Network+ Guide to Networks, 4E

  9. Test the Results • Must verify that problem solved properly • Type of testing depends on solution • Depends on area affected by problem • May not be able to test solution immediately after implementing it Network+ Guide to Networks, 4E

  10. Identify the Results and Effects of the Solution • Should be able to determine how and why solution was successful and effects on users and functionality • Want to avoid creating unintended, negative consequences as result of solution Network+ Guide to Networks, 4E

  11. Document the Solution and Process • Always record symptoms and cause(s) of a problem and solution • Impossible to remember circumstances of each incident • Networking personnel frequently change jobs Network+ Guide to Networks, 4E

  12. Help to Prevent Future Problems • Not all problems are preventable, but many can be avoided • Perform regular network health checks • Even continual network monitoring • When planning or upgrading a network, think about how good network designs and policies can prevent later problems Network+ Guide to Networks, 4E

  13. Troubleshooting Tools: Crossover Cable • Transmit and receive wire pairs in one connector are reversed • Directly interconnect two nodes without using an intervening connectivity device • Useful for quickly and easily verifying that node’s NIC is transmitting and receiving signals properly Network+ Guide to Networks, 4E

  14. Tone Generator and Tone Locator • Telecommunications closets often disorganized and poorly documented • Tone generator: Issues signal on wire pair • Tone locator: Emits tone when it detects electrical activity on wire pair • Cannot be used to determine cable characteristics • Such as whether it has defects or whether its length exceeds IEEE standards for a certain type of network Network+ Guide to Networks, 4E

  15. Tone Generator and Tone Locator (continued) Figure 12-4: Use of a tone generator and tone locator Network+ Guide to Networks, 4E

  16. Multimeter • Can measure many characteristics of an electric circuit, including its resistance and voltage • Voltmeter: measures voltage of electric current • Ohmmeter: measures resistance • Every type of wire has different resistance characteristics • Impedance: resistance that contributes to controlling signal • Telltale factor for ascertaining location of faults in a cable Network+ Guide to Networks, 4E

  17. Cable Continuity Testers • Test whether cable carrying signal to destination • When used on copper-based cables, applies small voltage to each conductor at one end of a cable • Checks whether voltage detectable at other end • Two parts: • Base unit: generates voltage • Remote unit: detects voltage • Some verify that wires in UTP or STP cables paired correctly and are not shorted, exposed, or crossed Network+ Guide to Networks, 4E

  18. Cable Continuity Testers (continued) Figure 12-6: Cable continuity testers Network+ Guide to Networks, 4E

  19. Cable Performance Testers • Accomplishes same continuity and fault tests as a continuity tester, and more • Performance testers perform following tasks: • Measure distance to connectivity device, termination point, or cable fault • Measure attenuation along cable • Measure near-end crosstalk between wires • Measure termination resistance and impedance • Pass/fail ratings for CAT 3, 5, 5e, 6, or 7 standards Network+ Guide to Networks, 4E

  20. Cable Performance Testers (continued) • Performance testers perform following tasks (continued): • Store and print cable testing results or directly save data • Graphically depict cable’s attenuation and crosstalk characteristics over length of cable • Time domain reflectometer (TDR): issues signal on cable and measures way signal reflects • Optical time domain reflectometer (OTDR): used for fiber optic cables Network+ Guide to Networks, 4E

  21. Cable Performance Testers (continued) Figure 12-7: A performance tester Network+ Guide to Networks, 4E

  22. Network Monitors • Software tool that continually monitors network traffic from a server or workstation • Typically can interpret up to Layer 3 • Determines protocols passed by each frame • Can’t interpret data inside frames • Many available programs: • Microsoft Network Monitor ships with Windows Server 2003 • Novell NETMON comes with NetWare 5.x and 6.x • Many others available Network+ Guide to Networks, 4E

  23. Protocol Analyzers • Capture traffic and analyze frames • Typically up to Layer 7 • Can interpret payload portion of frames • Can generate traffic in attempt to reproduce network problem and monitor multiple network segments simultaneously • Hardware-based protocol analyzers exist • Sole job is to identify and assess network problems • Tailored to particular type of network • May collect more information than can be processed Network+ Guide to Networks, 4E

  24. Protocol Analyzers (continued) Figure 12-8: Traffic displayed by protocol type Network+ Guide to Networks, 4E

  25. Wireless Network Testers • To test wireless connections, stations, or APs, need tools that contain wireless NICs and run wireless protocols • Programs exist that can scan for wireless signals over a geographical range and discover all APs and wireless stations transmitting in area • Determine whether AP functioning properly • Determine whether AP positioned correctly • Determine whether stations and APs are communicating over proper channels within a frequency band Network+ Guide to Networks, 4E

  26. Wireless Network Testers (continued) Figure 12-10: Wireless network testing tool Network+ Guide to Networks, 4E

More Related