1 / 0

David Haryadi

willem
Download Presentation

David Haryadi

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. FINAL PAPERA BIOMECHANICAL TEST OF UNILATERAL EXTERNAL FIXATION FRAME AND MODIFIED BILATERAL EXTERNAL FIXATION FRAME USING TIBIAL FRACTURE MODEL OF JAVA GOAT (Capra aegagrushircus)(EXPERIMENTAL STUDY) David Haryadi
  2. BACKGROUND External fixation of tibial bone can be used as a definitive treatment in managing open fracture of tibia which can give a stability and easy wound care. Retrospective study by Jeffry A (2010) between January 2007- September 2010 in Dr. Soetomo Hospital Surabaya, there were 58 cases open fracture cruris grade I, and 113 cases grade II, 89 cases grade III a, 32 cases Grade III b, and 23 cases grade III c. Unilateral frame external fixation have a weakness on its rigidity and classic bilateral frame there is possibility of screw sliding in the bone. Rigidity and biomechanical aspect of implant is one of the important factor for healing process.
  3. Anderson’s early concept called for application of through-and-through transfixion pins. This permitted multiplanar adjustment of the fracture fragments and also allowed compression at the fracture site. After reduction, a cast was applied while the limb was still held by the external device (Roger Anderson). Source: Pontarelli W. External fixaxion of tibia fracture. Department of Orthopaedic Surgery, University of Iowa Hospitals and Clinics, Iowa City, Iowa. The Iowa Orthopaedic Journal. 1982
  4. Study Purpose This research is an experimental laboratory study with post test only controlled group design. Methode Using 24 samples of Java goat’s tibial bone divided into control group and intervension group which is based on compression, torsion, and bending force Watch for shift the bone over 50% in diameter of compression force, and 10 degree of bending, also every rotation of torsion. Sample Using Federer formula: (t-1) (r-1) ≥ 15, (6 -1) (r-1) ≥ 15, r ≥ 4, minimal 4 sample each (4 x 6) = 24 Sample
  5. (source: Hopkins CE, Hamm TE, Leppart GL; Atlas Of Goat Anatomy. Part I: Osteology. Departement of The Army Edgewood Arsenal. Maryland: September. 1970)
  6. Denham PinSchanz ScrewKnowlesolive wireModification
  7. Prototype Material : Stainless Steel 316L (Low carbon) Weight: Schanz screw: 9 gr Connector : 9 gr Modified Pin : 16 gr Rod : 23 gr Weight : Total unilateral Frame (6 SS, 6C, 1R) = 131 gr Total Modified Bilateral Frame (4P, 8C, 2R, 4N) = 182 gr
  8. AUTOGRAPH SHIMADZU AGS10KNJ source: www.shimadzu.com
  9. Clinical Laboratorium
  10. Bending
  11. Compression
  12. Torsion
  13. Study Chart Randomisasi Uji Biomekanik: torsion Compression Bending
  14. RESULT
  15. CONCLUSION Modified bilateral frame is able to withstand torsion force 3.1 times, bending force 1.3 times, and compression force 2.5 times than unilateral frame external fixation.
  16. source: Ascare et al. A NOVEL DESIGN TO CANINE AND FELINE BONE HEALING USING EXTERNAL FIXATION
  17. Thanks you very much for your attention…
More Related