1 / 9

Measurement of energy spectra of α particles by a solid detector

Measurement of energy spectra of α particles by a solid detector. Wang Mian 6 th ,March, 2009. Energy Calibration of Si detector. E=(13.45±0.20)×Channel assuming E=0 for 0ch. Measurement of energy loss of α particle in Al. Photo of Fig.19.

waseem
Download Presentation

Measurement of energy spectra of α particles by a solid detector

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Measurement of energy spectra of α particles by a solid detector Wang Mian 6th,March,2009

  2. Energy Calibration of Si detector E=(13.45±0.20)×Channel assuming E=0 for 0ch

  3. Measurement of energy loss of α particle in Al

  4. Photo of Fig.19 The energy loss in Fig.19 is: 0.57 MeV•mg-1•cm2 My result is: (0.56±0.02)MeV•mg-1•cm2 Fit Well

  5. Determination of Al foil thickness From Fig.19, For Eα=5.4856MeV, one can find the range R0=6.8mg/cm2 D=(R0-R’)/ρAl

  6. Question 12: How many electron hole pair will be created when α particle From 241Am enters in Si detector and losses all the energy? ω≈3ev for electron hole pair creation in Si detector N=E/ ω=5.4×106/3=1.8×106 The number of electron hole pair Whatis the expected energy solution? Expected energy solution is R=2.35×Sqrt(F/N) F: Fano Factor, is 0.72 for solid state detector R=6.0×10-4

  7. Question 13: Determine the energy resolution of the Si detector .

  8. Question 14:Plot values of full width at half maximum in each pluse-height spectrum as a function of Al sheet thickness. What is reason of this dependence?

  9. Thanks

More Related