1 / 29

RHIC Optics Correction

RHIC Optics Correction. M. Bai C-A Dept., BNL Mini-workshop on ICA in Beam Measurement and Generic algorithm in Nonlinear beam dynamics, Bloomington, Indiana, March 14-16, 2012. Outline. RHIC Optics Design Offline linear model design Online implementation

walt
Download Presentation

RHIC Optics Correction

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. RHIC Optics Correction M. Bai C-A Dept., BNL Mini-workshop on ICA in Beam Measurement and Generic algorithm in Nonlinear beam dynamics, Bloomington, Indiana, March 14-16, 2012

  2. Outline • RHIC Optics Design • Offline linear model design • Online implementation • RHIC optics measurements status • RHIC optics correction status • ORM approach • AC dipole measurement based • Summary of commissioning of SBST • Future plans

  3. RHIC Optics Design • Build linear model to fulfill desired optics functions for the entire ramp with the constraints/inputs of • Magnet transfer functions • RHIC power supply/shunt currents limit • RHIC magnets’ wire-up scheme • Smooth changes of currents as function of beam energy • This is done by MAD

  4. Flowchart of RHIC optics design Courtesy of S. Tepikian, BNL

  5. RHIC Optics Design • Build linear model to fulfill desired optics functions for the entire ramp • Output: magnet strength as function of beta* • Handover the designed magnet strength as function of beta* to OptiCalc, RHIC online model • OptiCalc then re-generates beta functions for the entire ramp for machine operation. • Mode details on RHIC online model are discussed by G. Robert-Demolaize tomorrow

  6. RHIC Optics Measurement Techniques

  7. Status of RHIC Optics Measurement • Routine full ring beta/phase beat measurement using ac dipole for each operational lattice • Routine ac dipole setup: 0.01 away from betatron tune. A known systematic of ~6% • Each optics measurement is the average of at least 3 data sets in each plane. Each data set has 1024 turns. The bpm noise is less than 5%

  8. Measured Beta and Phase advance: Blue@100 GeV

  9. Status of RHIC Optics Measurement • Routine full ring beta/phase beat measurement using ac dipole for each operational lattice • Routine ORM measurement • Routine beta* measurement • using ac dipole • Modulating triplet quadrupoles • ORM

  10. Status of RHIC Optics Corrections • Focused on commissioning LOCO at RHIC before RUN10 • Initiated by T. Satogata ~ 6 years ago • limited quadrupoles to avoid degeneracy problem • Lumped triplet quads, Q4,Q6,Q8. Dual bpms are available at these quadrupoles • The data analysis shows the fits should be available to correct 15~20% beta-beat • Application of ORM analysis to actual machine was a mixed results • BPM data quality

  11. Status of RHIC Optics Corrections • Introduced SBST technique in RUN11 of pp • SBST: Sector By Sector Technique • It was first developed at LHC led by Dr. R. Tomas, “CERN Large Hadron Collider optics model, measurements, and corrections”, Phys. Rev. ST Accel. Beams 13, 121004 (2010) • The essence of this technique is to identify localized gradient errors. It assumes that the measured beta-beat mainly comes from the the gradient errors of triplets in IP with small beta* • Under this assumption, SBST treats part of machine as beamline with initial conditions matched to the measured twiss parameters • Then calculate the difference of measured phase advance vs. the model phase advance at each bpm • Can also be used to identify the local coupling error, dispersion error, etc.

  12. SBST Analysis of RHIC Blue Ring at 100 GeV IP 8

  13. SBST Commissioning in RUN11 • Initial IP6 correction helped to reduce the vertical beta-beat except sector 12-1 and sector 2&3 Calculated: Q5I6, 0.95 Q5O6, 0.96 Actual applied correction: design trim bi5-qf7 0.078881 0.00135248944 bo6-tq5 0.0211343 -0.0029438348

  14. Effect of IP6 Correction Fill15161

  15. Summary of SBST Commissioning • Initial IP6 correction helped to reduce the vertical beta-beat except sector 12-1 and sector 2&3 • IP8 correction wasn’t effective in vertical. And it showed mixed effects on the horizontal beta-beat Calculated: Q6OT8,0.99, Q5OT8,0.9, Q3I8,1.0005, Q5IT8,0.98

  16. Effect of IP8 Correction Fill15329

  17. Summary of SBST Commissioning • Initial IP6 correction helped to reduce the vertical beta-beat except sector 12-1 and sector 2&3 • IP8 correction wasn’t effective in vertical. And it showed mixed effects on the horizontal beta-beat • Together with IP6 correction, IP12 correction shows moderate effect on horizontal beta-beat at the expense of vertical beta-beat. This solution also affected beta* at IP6 and IP8

  18. Baseline, IP6, IP12+IP6

  19. Summary of SBST Commissioning • Initial IP6 correction helped to reduce the vertical beta-beat except sector 12-1 and sector 2&3 • IP8 correction wasn’t effective in vertical. And it showed mixed effects on the horizontal beta-beat • Together with IP6 correction, IP12 correction shows moderate effect on horizontal beta-beat at the expense of vertical beta-beat. This solution also affected beta* at IP6 and IP8 • Together with reduced IP6 correction, IP4 correction shows moderate effect on vertical beta-beat except sector 6&7. No significant effect on horizontal beta-beat

  20. SBST Analysis IP12, Fill 15161

  21. Encountered Issues • Limited knobs • RHIC nesting power supply scheme

  22. Encountered Issues • Limited knobs • RHIC nesting power supply scheme

  23. Encountered Issues • Limited knobs • RHIC nesting power supply scheme • limited independent knobs: trim quads at Q5, Q6 • Power supply limit • Reproducibility of optics

  24. Reproducibility?

  25. Encountered Issues • Issues • Limited knobs • Reproducibility of optics • Complicated RHIC modeling infrastructure • Two model engines for RHIC: mad and online model(Opticalc) • They don’t carry exact the same lattice, for instance, the crossing angles, local coupling corrections, etc. • Each model uses slightly different magnet transfer function • For mad, it assumes the same transfer function for the same type of magnets • For online model, the actual measured transfer function for each magnet is used

  26. Beam not centered in Quads Applying 40% IP2+12 correction removing 40% IP2+12 correction 80% IP6, 20% IP12 correction and IP2 20% 80% IP6, 20% IP12 correction 80% IP6 correction Applying 80% IP6 correction Removing all correction

  27. Summary • First experience of SBST at RHIC was encouraging • Latest SBST analysis of latest RHIC 100 GeV pp operation indicates there is no gross local gradient errors in Blue IR. The measured beta-beat is ~10% rms. This is consistent with 0.85m beta* at 100 GeV • SBST is also very sensitive to bpm timing, …. • In order to reach less than 10% beta-beat, one needs to consider global optics correction as demonstrated in LHC

  28. Global Optics Correction • What is it? Phase advance • Calculate gradient deviation from the model • Only work for small perturbation and assume the model is pretty close to reality • Demonstrated proof-of-principle in RUN2009 ago with a dialed-in gradient error of one of the IR trim quads • Briefly tested correction at injection with only IR trim quads. No conclusions due to limited data

  29. Measured Beta-Beat: Blue • rms beta-beat in arcs is under 10% • large beta-beat spikes at IP8 not quite • understood. Investigating …

More Related