1 / 11

Magnification showing pads and “bias ring”

First Look at SiD Charge Division Sensors at SCIPP. Magnification showing pads and “bias ring”. Higher Magnification showing apparent “vias” at regular intervals along length of strip. September 2, 2008 IV and CV curves on Charge Division Sensors Setup: -Backside H.V. (High Pot)

wagee
Download Presentation

Magnification showing pads and “bias ring”

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. First Look at SiD Charge Division Sensors at SCIPP Magnification showing pads and “bias ring”

  2. Higher Magnification showing apparent “vias” at regular intervals along length of strip

  3. September 2, 2008 IV and CV curves on Charge Division Sensors Setup: -Backside H.V. (High Pot) -GND (Low Pot) on strip zero, next to bias and guard ring -GND (Low Pot) on Bias Ring, and Strip's 2nd and 5th Neighbor

  4. September 2, 2008 IV and CV curves on Charge Division Sensors Setup: -Backside H.V. (High Pot) -GND (Low Pot) on strip zero, next to bias and guard ring -GND (Low Pot) on Bias Ring, and Strip's 2nd and 5th Neighbor

  5. September 2, 2008 IV and CV curves on Charge Division Sensors Setup: -Backside H.V. (High Pot) -GND (Low Pot) on strip zero, next to bias and guard ring -GND (Low Pot) on Bias Ring, and Strip's 2nd and 5th Neighbor

  6. September 2, 2008 IV and CV curves on Charge Division Sensors Setup: -Backside H.V. (High Pot) -GND (Low Pot) on strip zero, next to bias and guard ring -GND (Low Pot) on Bias Ring, Guard Ring, and 2nd Neighbor

  7. September 2, 2008 IV and CV curves on Charge Division Sensors Setup: -Backside H.V. (High Pot) -GND (Low Pot) on strip zero, next to bias and guard ring -GND (Low Pot) on Bias Ring, Guard Ring, and 2nd Neighbor

  8. September 2, 2008 IV and CV curves on Charge Division Sensors Setup: -Backside H.V. (High Pot) -GND (Low Pot) on strip zero, next to bias and guard ring -GND (Low Pot) on Bias Ring, Guard Ring, and 2nd Neighbor

  9. September 2, 2008 IV and CV curves on Charge Division Sensors Setup: -Backside H.V. (High Pot) -GND (Low Pot) on strip zero, next to bias and guard ring -GND (Low Pot) on Bias Ring, and Strip's 1st Neighbor

  10. September 2, 2008 IV and CV curves on Charge Division Sensors Setup: -Backside H.V. (High Pot) -GND (Low Pot) on strip zero, next to bias and guard ring -GND (Low Pot) on Bias Ring, and Strip's 1st Neighbor

  11. September 2, 2008 IV and CV curves on Charge Division Sensors Setup: -Backside H.V. (High Pot) -GND (Low Pot) on strip zero, next to bias and guard ring -GND (Low Pot) on Bias Ring, and Strip's 1st Neighbor

More Related