1 / 53

RUTGERS INTELLIGENT TRANSPORTATION SYSTEMS INSPECTION AND MAINTENANCE SOFTWARE (RITSIMS)

RUTGERS INTELLIGENT TRANSPORTATION SYSTEMS INSPECTION AND MAINTENANCE SOFTWARE (RITSIMS). NJDOT TRAINING CASE STUDY. 03.12-13.2008. Inspection for a CCTV: 1. Pre-Construction Electric Service 2. Service Poles and Electrical Feed. Inspection.

vmoore
Download Presentation

RUTGERS INTELLIGENT TRANSPORTATION SYSTEMS INSPECTION AND MAINTENANCE SOFTWARE (RITSIMS)

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. RUTGERS INTELLIGENT TRANSPORTATION SYSTEMS INSPECTION AND MAINTENANCE SOFTWARE(RITSIMS) NJDOT TRAINING CASE STUDY 03.12-13.2008

  2. Inspection for a CCTV:1. Pre-Construction Electric Service 2. Service Poles and Electrical Feed

  3. Inspection • A new CCTV equipment is to be installed at I-287 Intersection on Route 1. • It should be checked if it satisfies the inspection criteria.

  4. Inspection • The trainer checks the location and details of the camera at the office and consults his supervisor. • With his laptop or tablet PC, and/or printed documents, he is ready to for the site inspection.

  5. User Manual (How to Open RITSIMS?) • Find the RITSIMS.exe on your desktop and just click on the application.

  6. User Manual (How to Open RITSIMS?) • As an alternative, locate the RITSIMS software folder. • Find the MTSOFT.exe and just click on the application.

  7. User Interface

  8. User Manual (User Name and Password) Select user1 as Username Write 1234 for Password

  9. User Manual (Starting the Applications) Select “Start Inspection or Maintenance Applications”

  10. User Manual (Equipment Selection) Select “Closed Circuit Television Systems”

  11. User Manual (Option Selection) Select “Inspection” Option

  12. User Manual (Location Selection) Select Equipment Location

  13. User Manual (Previous History Check) As this is the first time inspection, observe that there is no previous history. Click on “NEXT”

  14. User Manual (Equipments) Select “Preconstruction Electric Service”. Click on “START APPLICATION”

  15. User Manual (Questions) Answer the eight questions as instructed in your handout

  16. User Manual (Questions) Then, click on “Next Component”

  17. User Manual (Equipments) Select “Service Poles and Electrical Feed”. Click on “START APPLICATION”

  18. User Manual (Questions) Answer the five questions as instructed in your handout

  19. User Manual (Questions) Click on “Exit” to see the Final Report

  20. User Manual (Inspection Report) See the inspection report and write comments if needed!

  21. User Manual (Inspection Report) Change the “FAIL” answers to “PASS”! When finished, click on “END”.

  22. User Manual (Inspection Report) Click on “SAVE AND CLOSE”!

  23. Maintenance for the same CCTV:Conduit and Cables

  24. Maintenance • It has been a month since the installation and acceptance of the new CCTV equipment. • It now should be checked if it works properly through the preventive maintenance checklists.

  25. Maintenance • The trainer is getting ready for the preventive maintenance checks for the CCTV equipment. • With his laptop or tablet PC, and/or printed documents, he is ready to for the site maintenance checks.

  26. User Manual (How to Open RITSIMS?) • Find the RITSIMS.exe on your desktop and just click on the application.

  27. User Manual (How to Open RITSIMS?) • As an alternative, locate the RITSIMS software folder. • Find the MTSOFT.exe and just click on the application.

  28. User Manual (User Name and Password) Select user1 as Username Write 1234 for Password

  29. User Manual (Starting the Applications) Select “Start Inspection or Maintenance Applications”

  30. User Manual (Equipment Selection) Select “Closed Circuit Television Systems”

  31. User Manual (Option Selection) Select “Maintenance” Option

  32. User Manual (Previous History Check) Observe the previous inspection performed. Click on “NEXT”

  33. User Manual (Options/Components) Select “Preventive/Routine”Maintenance Option. Select “CCTV Conduit and Cables” Click on “START APPLICATION”

  34. User Manual (Questions) Answer the eight questions as instructed in your handout

  35. User Manual (Questions) Then, click on “Exit” to See the Final Report

  36. User Manual (Maintenance Report) See the maintenance report and write comments if needed!

  37. User Manual (Maintenance Report) Change the “Not Completed” Answers to “Completed”! When finished, click on “END”.

  38. User Manual (Maintenance Report) Click on “SAVE AND CLOSE”!

  39. Database Synchronization – Updating Master Database

  40. User Manual (User Name and Password) Select user1 as Username Write 1234 for Password

  41. User Manual (Database Synchronization) Select “Update Master Database”

  42. User Manual (Database Synchronization) Select “Inspection Master Database”

  43. User Manual (Database Synchronization) Locate the Master Database File and Click on it

  44. User Manual (Database Synchronization) Select “Maintenance Master Database”

  45. User Manual (Database Synchronization) Locate the Master Database File and Click on it

  46. User Manual (Database Synchronization) Select “Copy to Master Database”

  47. User Manual (Database Synchronization) Observe the transferred records. Click on “Close”.

  48. History Checks/Queries

  49. User Manual (User Name and Password) Select user1 as Username Write 1234 for Password

  50. User Manual (History Option) Select “History” option

More Related