1 / 12

OSMOSIS & DIFFUSION LAB

OSMOSIS & DIFFUSION LAB. Animation from: http://www.lionden.com/cell_animations.htm. SAFETY. DO NOT EAT OR DRINK ANYTHING IN LAB! IODINE IS POISONOUS WEAR AN APRON! IODINE WILL STAIN YOUR SKIN AND CLOTHING. Image from: http://www.llnsciencepark.be/en2/images/caution.jpg.

vlora
Download Presentation

OSMOSIS & DIFFUSION LAB

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. OSMOSIS & DIFFUSIONLAB Animation from: http://www.lionden.com/cell_animations.htm

  2. SAFETY • DO NOT EAT OR DRINK ANYTHING IN LAB! • IODINE IS POISONOUS • WEAR AN APRON!IODINE WILL STAIN YOUR SKIN AND CLOTHING Image from: http://www.llnsciencepark.be/en2/images/caution.jpg

  3. IODINE TEST for STARCH Iodine turns BLUE-BLACK in the presenceof starch. http://faculty.ntcc.edu/mhearron/cell_chemistry.htm

  4. DIP TEST FOR GLUCOSE If glucose is presentstrip will turn from YELLOW to ARMY GREEN Image modified from: http://www.freepatentsonline.com/6531322.html

  5. http://www.chemistryland.com/CHM107Lab/Lab5/Soil/Lab5Exp3Soil.htmlhttp://www.chemistryland.com/CHM107Lab/Lab5/Soil/Lab5Exp3Soil.html STATION #1 1. Fill cup with ¾ full with water 2. Use test strip to TEST FOR GLUCOSE.(Strip will turn from yellow to green if glucose is present) 3. Mark test results in lab packet 4. Go to Station #2

  6. STATION #2 • Add 30 drops of IODINE to water in your cup. Be careful! IODINE IS POISONOUS! It will stain your clothes! It will stain your skin! 2.Use a permanent marker to label the level of liquid in the cup. 3. Go to Station #3. Image by Riedell

  7. http://www.beartoes.com/images/sink.jpg STATION #3 1. Hold membrane bag UNDER RUNNING WATER and rub it with your fingers until it opens. 2. Run water THROUGH the INSIDE of the bag. 3. Tie a KNOT at ONE end of the bag. 4. Go to Station #4.

  8. STATION #4 1. Make sure you have tied a knot in ONE end of the membrane bag. 2. Fill bag with GLUCOSE (use 2 fingers to determine how much to fill it) 3. Pinch end closed to keep from spilling 4. Go to Station #5. Image by Riedell

  9. STATION #5 • 1. Add STARCH tothe membrane bagon top of the glucose Images by Riedell (use 2 fingers to determine how much to fill it) 2. Leave a little space at the end and tie a KNOT to seal the bag. 3. Go to Station #6.

  10. STATION #6 • Take your MEMBRANE BAG to the SINK and RINSE IT ………really, really, really, really, really, really, really, really,(I mean it!) REALLLLLLLLY WELL. • Go to Station #7.

  11. STATION #7 1. DRY OFF the membrane bag and use a BALANCE to determine its MASS. Write this down in your lab packet Remember which balance you use so you can use the SAME ONE tomorrow!

  12. STATION #8 1. Use PERMANENT MARKER to mark level of liquid in your cup. 2. Take cup back to your table. 3. START EXPERIMENT by placing the membrane bag in the cup. 4. WAIT AND WATCH WHAT HAPPENS! Image by Riedell

More Related