1 / 18

Assessment of ECCD-Assisted Operation in DEMO

Max-Planck-Insititut für Plasmaphysik. Assessment of ECCD-Assisted Operation in DEMO. Emanuele Poli 1 , Emiliano Fable 1 , Giovanni Tardini 1 , Hartmut Zohm 1 , Daniela Farina 2 , Lorenzo Figini 2 , Nikolai Marushchenko 3 , Laurie Porte 4

vaughanj
Download Presentation

Assessment of ECCD-Assisted Operation in DEMO

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Max-Planck-Insititut für Plasmaphysik Assessment of ECCD-Assisted Operation in DEMO Emanuele Poli1, Emiliano Fable1, Giovanni Tardini1, Hartmut Zohm1, Daniela Farina2, Lorenzo Figini2, Nikolai Marushchenko3, Laurie Porte4 (1) Max-Planck-Institut für Plasmaphysik, EURATOM Association, Garching bei München, Germany (2) Istituto di Fisica del Plasma del CNR, EURATOM-ENEA-CNR Association, Milano, Italy (3) Max-Planck-Institut für Plasmaphysik, EURATOM Association, Teilinstitut Greifswald, Germany (4) Centre de Recherches en Physique des Plasmas, CRPP-EPFL, Lausanne, Switzerland Emanuele Poli, 17th Joint Workshop on ECE and ECRH Deurne, May 7-10, 2012

  2. Motivations • External current drive essential in a tokamak fusion reactor to ensure (nearly) steady-state operation • ECCD usually considered technologically mature, but not very attractive because of comparatively low CD efficiency (driven current per injected power) • However: • Wall-plug efficiency also important for a power plant (might be higher for ECCD) • Smaller slot in the blanket required for ECCD as compared to NBI • Optimization of ECCD efficiency still possible… • In this talk: • Exploration of the achievable ECCD efficiency for 2 DEMO options • First estimate of the ECCD power required for fully non-inductive operation • (loop voltage → 0) Emanuele Poli, 17th Joint Workshop on ECE and ECRH Deurne, May 7-10, 2012

  3. Current drive efficiency • “Standard” efficiency used for reactor studies: • Typical values quoted for reactor-grade plasmas: Emanuele Poli, 17th Joint Workshop on ECE and ECRH Deurne, May 7-10, 2012

  4. DEMO models • Global parameters as originally proposed by D. Ward for H & CD assessment • CHEASE equilibria reprocessed by ASTRA (investigate different density and temperature profiles at same βN) • Steady-state DEMO: R0 = 8.5 m, a = 2.83 m, B0 = 5.84 T, βN = 2.95 Density Temperature Emanuele Poli, 17th Joint Workshop on ECE and ECRH Deurne, May 7-10, 2012

  5. DEMO models • Global parameters as originally proposed by D. Ward for H & CD assessment • CHEASE equilibria reprocessed by ASTRA (investigate different density and temperature profiles at same βN) • Pulsed (6 hrs) DEMO: R0 = 9.6 m, a = 2.4 m, B0 = 7.45 T, βN = 2.6 Density Temperature Emanuele Poli, 17th Joint Workshop on ECE and ECRH Deurne, May 7-10, 2012

  6. Current drive scenarios • High magnetic field → ordinary mode, first-harmonic heating envisaged • High temperature → significant parasitic absorption by higher harmonics • Resonance condition implies first-harmonic absorption possible if • ECCD modelling (TORBEAM) including momentum conservation (Marushchenko) First-harmonic accessibility (Steady-State DEMO) Emanuele Poli, 17th Joint Workshop on ECE and ECRH Deurne, May 7-10, 2012

  7. Mid-plane injection, peaked density • Scan over frequency ω/2πand toroidal angle β (poloidal angle = 0) • ICD first rises as the deposition is pushed towards the plasma centre, then decreases because of too large parasitic absorption • High-field side hardly accessible Emanuele Poli, 17th Joint Workshop on ECE and ECRH Deurne, May 7-10, 2012

  8. Mid-plane injection, peaked density • Scan over frequency ω/2πand toroidal angle β (poloidal angle = 0) • ICD first rises as the deposition is pushed towards the plasma centre, then decreases because of too large parasitic absorption • High-field side hardly accessible Emanuele Poli, 17th Joint Workshop on ECE and ECRH Deurne, May 7-10, 2012

  9. Mid-plane injection: example • Near maximum current drive: β = 40°, ω/2π = 215 GHz • Second-harmonic absorption ≈ 8% (34% for ω/2π=225 GHz,28% for β=35°) Emanuele Poli, 17th Joint Workshop on ECE and ECRH Deurne, May 7-10, 2012

  10. Top injection, peaked density, 230 GHz • Injection from R = 10.5 m, Z = 3.5 m to reduce the path through the 2nd-harmonic absorption region • Allows high-efficiency off-axis current • High N|| needed to move the 1st -harmonic region to larger R; more sensitive to injection angle Emanuele Poli, 17th Joint Workshop on ECE and ECRH Deurne, May 7-10, 2012

  11. Top injection, peaked density • Optimum efficiency shifts towards larger minor radii for higher antenna location • γCD > 0.35 obtained around ρpol ~ 0.2-0.3 Emanuele Poli, 17th Joint Workshop on ECE and ECRH Deurne, May 7-10, 2012

  12. Top injection, flat density, 230 GHz • Injection from R = 10.5 m, Z = 3.5 m • Higher ECCD current because of lower density as in the “peaked” case, but lower efficiency Emanuele Poli, 17th Joint Workshop on ECE and ECRH Deurne, May 7-10, 2012

  13. Large-aspect-ratio, pulsed DEMO • Lower trapped-particle fraction, lower Zeff → higher current drive • High frequencies needed because of high magnetic field (290 GHz in this example) Emanuele Poli, 17th Joint Workshop on ECE and ECRH Deurne, May 7-10, 2012

  14. Power required for steady state • Vanishing loop voltage achieved for deposition around ρpol = 0.4 with approx. 230 MW of injected power (bootstrap fraction around 0.35) Emanuele Poli, 17th Joint Workshop on ECE and ECRH Deurne, May 7-10, 2012

  15. Summary • High ECCD efficiency possible with careful optimization (largest values around ρpol ~ 0.3) • High-frequency sources necessary • Investigation of self-consistent ECCD-equilibrium loop under way → optimization of CD position in terms of efficiency and bootstrap fraction Emanuele Poli, 17th Joint Workshop on ECE and ECRH Deurne, May 7-10, 2012

  16. Current drive efficiencies • CD efficiency defined on each flux surface as ratio between current density and deposited power density • Dimensionless efficiency • In terms of total driven current and total absorbed power (apart from geometric factors) • ζCD intended to describe efficiency variations due to changes of the velocity-space region where the wave-particle interaction takes place Emanuele Poli, 17th Joint Workshop on ECE and ECRH Deurne, May 7-10, 2012

  17. ECCD Modelling • Beam tracing code TORBEAM, linear absorption (TORAY and GRAY fully-relativistic routines), adjoint method for CD (including momentum conservation) • Extensively benchmarked… • Momentum conservation leads to a CD increase Emanuele Poli, 17th Joint Workshop on ECE and ECRH Deurne, May 7-10, 2012

  18. Mid-plane injection, peaked density • Scan over frequency ω/2πand toroidal angle β (poloidal angle = 0) • ICD first rises as the deposition is pushed towards the plasma centre, then decreases because of too large parasitic absorption • ζCD ~ γCD/Teincreases due decreasing trapped-particle fraction Emanuele Poli, 17th Joint Workshop on ECE and ECRH Deurne, May 7-10, 2012

More Related