1 / 18

High-Power High-Efficiency Photodiode for Advanced LIGO LIGO-G010359-00-Z

High-Power High-Efficiency Photodiode for Advanced LIGO LIGO-G010359-00-Z. David Jackrel Ph.D. Candidate- Dept. of Materials Science & Eng. Advisor- Dr. James S. Harris August 14 th , 2001. Outline. Introduction Photodiode Specifications Device Structure & Materials

varuna
Download Presentation

High-Power High-Efficiency Photodiode for Advanced LIGO LIGO-G010359-00-Z

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. High-Power High-Efficiency Photodiode for Advanced LIGO LIGO-G010359-00-Z David Jackrel Ph.D. Candidate- Dept. of Materials Science & Eng. Advisor- Dr. James S. Harris August 14th, 2001

  2. Outline • Introduction • Photodiode Specifications • Device Structure & Materials • Experimental Results • DC Response • RF Response • Development Plan • InGaAs • GaInNAs

  3. Photodiode Specifications?

  4. P-I-N Device Characteristics • Large E-field in I- region • Depletion Width  Width of I- region • RC time constant • Tuned to a specific 

  5. Heterojunction Band Gap Diagram •  = 1.064m  h = 1.17eV • Absorption occurs in i-region • InAlAs Optically transparent to 1.06m radiation n- p- i- N-layer: In.22Al.78As Eg2=1.8eV I-layer: In.22Ga.78As Eg1=1.1eV P-layer: In.22Al.78As Eg2=1.8eV

  6. Rear-Illuminated PD Advantages • High Power • High Speed • Linear Response Conventional PD Adv. LIGO Rear-Illuminated PD

  7. InGaAs/GaAs PD Structure • MBE • GaAs Substrate • InGaAs for i-layer • InAlAs for the n- and p- layers • Graded Buffer layer • AR coating & Au/Pt contacts 2 m

  8. III-V Lattice Constants and Band Gaps • InAlAs and InGaAs well lattice matched • InAlAs much wider band gap

  9. TEM Images of Confined Dislocations Device Layers: -few dislocations Graded Buffer: -many dislocations

  10. Nd:YAG (NPRO) PD Test Setup RF Amplitude Modulator Power Meter PD Power Control NPRO (800mW)

  11. Quantum Efficiency: #673 30% Loss

  12. QE: Power & Bias Effects

  13. DC Response Linearity: #673

  14. RF Response: 3dB Bandwidth ~4MHz, 3dB-Bandwidth  ~5nF Capacitance

  15. C-V Characteristics (#673)  depletion width 1.44 m ~2.16m

  16. InGaAs Development Plan Goals:by Sept. 2002… 90% QE Thin substrates to 50m-100m Maximize Bandwidth Optimize illuminated area

  17. GaInNAs Lattice-Matched to GaAs GaInNAs- Adv LIGO InGaAs- LIGO I PD

  18. Conclusion • Introduction • Photodiode Specifications • Device Structure & Materials  InGaAs RI PIN PD • Experimental Results • DC Response  70% QE • RF Response  4MHz 3-dB Bandwidth • Development Plan • InGaAs • GaInNAs

More Related