1 / 20

Advanced VIRGO Input optics LIGO-G070361-00-Z

Advanced VIRGO Input optics LIGO-G070361-00-Z. The Advanced Virgo injection system. Advanced VIRGO: in 2011 VIRGO should be ready to be upgraded to a detector with about 200 W input power 200 W Laser source: two options are open (see Nary’s talk): Solid State Laser source (SSL)

harsha
Download Presentation

Advanced VIRGO Input optics LIGO-G070361-00-Z

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Advanced VIRGO Input optics LIGO-G070361-00-Z

  2. The Advanced Virgo injection system • Advanced VIRGO: in 2011 VIRGO should be ready to be upgraded to a detector with about 200 W input power • 200 W Laser source: two options are open (see Nary’s talk): • Solid State Laser source (SSL) • Fibre Laser (FL) source • The layout of the optics downstream of the laser has not been decided. Open options are: • In-air elements (Faraday, EOM, mirrors, waveplates, polarizers, …) • Suspended resonant input mode cleaner • In vacuum suspended optics (Faraday, polarizers) • Matching telescope • Photonic fibre input mode cleaner • Integrated fibre elements In any case: components withstanding 200 W

  3. Standard solution (LIGO) RESONANT SUSPENDED INPUT MODE CLEANER SUSPENDED OPTICS (FI) AND INPUT TELESCOPE 200 W SSL LASER IN AIR HP INPUT OPTICS FI FI EOM

  4. Possible fibre alternative Possible fibre solution: • Fibre integrated components (EOM, FI, …) • Fibre IMC • In vacuum Faraday isolator • Matching telescope

  5. All fibre solution SUSPENDED OPTICS AND INPUT TELESCOPE HP INTEGRATED FIBRE INPUT OPTICS PHOTONIC FIBRE INPUT MODE CLEANER 200 W FIBRE LASER EOM FI FI

  6. Present advanced VIRGO reference solution LIGO: • Solid State Laser source • In-air components • Suspended resonant IMC • In vacuum Faraday isolator and suspended optics • Matching telescope • Lots of R&D already done

  7. VIRGO present activity • A program for developing High Power Input Optical components has been funded (February 2007): • All what is necessary for setting up the HP power source is being purchased: • HP Ytterbium laser (IPG 200 W) • Optics • Beam analyser • Detectors • Cavities • Clean air, beam dumps • Vacuum chamber • … • First tests: • Tests on DKDP samples could start in Fall Simulation and tests of thermal effects in Faraday isolators are being performed (see Slim’s talk) • Even if Advanced VIRGO polarizers reference solution is likely calcite, tests on Brewster polarizers (General Optics substrates and Lyon coatings) for VIRGO+ will start in fall 2007

  8. HP- IO components for Advanced Virgo l/2 HP PUMP SINGLE MODE PROBE POL HP power meter CCD Test cavity ACQUISITION Beam Analyser Beam Analyser Phd Phd

  9. HP- IO components for Advanced Virgo l/2 HP PUMP l/2 SINGLE MODE PROBE EOM POL HP power meter CCD Test cavity ACQUISITION Beam Analyser Beam Analyser Phd Phd

  10. EOM • In VIRGO+ EOM made of KTP crystal will be used • Same as present VIRGO • Thermal focal length (about 30 m) corrected by the in air tuning telescope • Reference solution: Advanced LIGO EOM: • RTP EOM crystal: • About 10 times lower absorption (0.005 m-1 vs 0.05 m-1) • Lower dnz/dT • Higher damage threshold • wedged (about 3°) EOM crystals • We will in any case perform tests on KTP EOM (already for VIRGO+)

  11. HP- IO components for Advanced Virgo l/2 HP PUMP l/2 SINGLE MODE PROBE Faraday POL DKDP HP power meter CCD Test cavity ACQUISITION Beam Analyser Beam Analyser Phd Phd

  12. Faraday isolator • An in-vacuum Faraday isolator will be used even with a fibre IMC • Good experience already acquired in Virgo: • Thermal lensing • Thermal effects on isolation • Many things understood ad a lot of simulation performed • Results can be compared with those of LIGO • Ready to start soon high power in-vacuum tests (Slim’s talk) • Reference solution for Advanced Virgo: Advanced LIGO Faraday Isolator

  13. Fibre solution Fibred components: (like integrated fibred EOM, FI) Apparently more advantageous: • Reliability • Alignment • Neither acoustic nor seismic noise • High power • Telecom tested solutions • Easily integrated with a fibred input mode cleaner • … But: • More experience needed soon • Very short time to make high power tests

  14. Possible adaptation for HP-IO fibred components l/2 HP PUMP SINGLE MODE PROBE Fibred components POL HP power meter CCD Test cavity ACQUISITION Beam Analyser Beam Analyser Phd Phd

  15. Working program At the same time we need: • Start requirements computation (EOM, IMC, telescopes, stabilization, …) • Start simulation and design of a possible resonant IMC • Start simulation and design of a possible matching telescope • Take advantage from LIGO R&D • Perform our own R&D and develope experience

  16. Input Optics (Faraday, EOM, Polarizers, …) Requirements: • Faraday (in air and in vacuum) • Level of power impinging on them • Level of optical isolation • Insertion loss allowed • Beam distorsion allowed • Compensation (lensing, isolation) • EOM: • Minimum modulation depth • Stability of sidebands • Level of power impinging on them • Polarizers, mirrors, splitters (scattering issues) • How things will change depending on the choices for the ITF (for example if there will be DC detection).

  17. Input Mode Cleaner Requirements: Which are the different options open • Suspended • Fibre In case of suspended IMC: • Length, Finesse, transmission, use of dihedron • Frequency pole for HF noise • Scattered light on the mirrors and on their support, • Seismic isolation of the mirrors • Filtering

  18. Input/output telescopes Requirements: • Which are the different options: • Long, short • Standard lenses • Parabolic, off-axis • Adaptive matching • Stability, Matching, Insertion loss by aberrations • Seismic isolation • Scattering: maximum reflection by AR coatings • Depending on: • Different possible IMC • ITF configuation

  19. What is being done • In-air HP-IO components: Activity started: EGO, Pisa, Naples • In vacuum suspended optics: Activity started: EGO, Pisa, Naples • Integrated fibre elements: To be decided: Possible within the EGO, Pisa, Naples R&D (coordinated with NIce activity) • Suspended resonant IMC: Very little action taken • Matching telescope No action taken

  20. WG2 involved people • 21 People included in the WG2 mailing list • Work effectively performed by only a few of them • All of them are also involved in the Virgo Commissioning and/or in the Virgo+ ugrades • More collaboration with WG1 is needed: very important for defining requirements • Injection system configuration: not yet assessed • Manpower, at least up to now, is not sufficient • After the start of the Science Run more time/people will be available

More Related