1 / 8

Non-Arc Welding Processes

Introduction. Non-Arc Welding Processes. Resistive heating, chemical reactions, focused light and electrons, sound waves, and friction can also be used to join materials Resistance welding Oxy-Fuel Welding Friction welding (&Solid State) Laser and electron beam welding

tyra
Download Presentation

Non-Arc Welding Processes

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Introduction Non-Arc Welding Processes • Resistive heating, chemical reactions, focused light and electrons, sound waves, and friction can also be used to join materials • Resistance welding • Oxy-Fuel Welding • Friction welding (&Solid State) • Laser and electron beam welding • Brazing and soldering • Plastics joining • Adhesive bonding

  2. Adhesives • Thermosets form long polymer chains by chemical reaction (curing) • Heat is the most common means of curing • Ultraviolet light, oxygen - acrylics • Moisture - cyanoacrylates • Thermoplastics (hotmelts) • Adhesive is heated until it softens, then hardens on cooling -Polyethylene, PVC 0.1.1.2.6.T26.95.12

  3. Adhesive Bonding Curing of Adhesives • Thermosets form long polymer chains by chemical reaction (curing) • Heat (epoxy) • Ultraviolet light, oxygen (acrylics) • Moisture (superglue)

  4. Stress Modes - Best to Worst 1. Compression 2. Shear 3. Tension 5. Cleavage 4. Peel 0.1.1.2.6.T29.95.12

  5. Adhesive Bonding Why Adhesive Bonding? • Dissimilar materials • Plastic to metal • Materials that can be damaged by mechanical attachments • Shock absorption or mechanical dampening • Laminate structures • Skin to honeycomb structure

  6. Adhesive Bonding Adhesive Selection • Adhesive selection is based primarily on • Type of substrate • Strength requirements, type of loading, impact requirements • Temperature resistance, if required • Epoxy • Cyanoacrylates • Anaerobics - metals • Urethanes • Silicones • Pressure sensitive adhesives (PSAs)

  7. Advantages • Joining dissimilar materials - plastic to metal • Materials that can be damaged by mechanical attachments • Blind joints • Shock absorption or mechanical dampening • Temporary alignment • Laminated structures • Thin substrates - skin-to-honeycomb construction • Stress distribution 0.1.1.2.6.T27.95.12

  8. Adhesive Bonding Limitations • Adhesives don’t do work, they distribute work; they are not structural materials • Environmental degradation • Temperature • Oxidation • Difficult to repair • Curing or setting time • Surface preparation

More Related