1 / 26

Measuring gravitational waves with GEO600

Measuring gravitational waves with GEO600. Martin Hewitson and the GEO team. Overview. h(t). GEO. v(t) [V]. Noise e.g., seismic, laser. calibrate. 1 GEO. v(t) [V]. h(t) + noise. P(t) [V]. filter. Inside the GEO box. h(t) detected. h(t). Optical cavity. +. v(t) [V]. Seismic

ttiffany
Download Presentation

Measuring gravitational waves with GEO600

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Measuring gravitational waves with GEO600 Martin Hewitson and the GEO team

  2. Overview h(t) GEO v(t) [V] Noise e.g., seismic, laser calibrate 1 GEO v(t) [V] h(t) + noise R&D Hannover July 2004

  3. P(t) [V] filter Inside the GEO box h(t) detected h(t) Optical cavity + v(t) [V] Seismic noise Keep detector at its operating point (dark fringe) R&D Hannover July 2004

  4. In the steady state…. R&D Hannover July 2004

  5. Optical transfer function R&D Hannover July 2004

  6. Optical transfer function - equations • For each quadrature, P and Q, • Overall gain • Pole frequency • Pole Q • Zero frequency R&D Hannover July 2004

  7. Measured optical response - P R&D Hannover July 2004

  8. Measured optical response - Q R&D Hannover July 2004

  9. calibration Calibration overview R&D Hannover July 2004

  10. Calibration software tasks R&D Hannover July 2004

  11. On-line measurement of optical TF R&D Hannover July 2004

  12. Optimisation routine • Fit models of the optical transfer functions to the measured ones • 8 parameter fit • Gp, Ppf, Ppq, Pzf, Gq, Qpf, Qpq, Qzf • Algorithm uses various minimisation methods to find the best parameter set that describes the data • It also returns a measure of success – c2 R&D Hannover July 2004

  13. Undoing the effect of the optical response • The parameters from sys id can be used to generate inverse optical response • Poles to zeros, zeros to poles, invert gains • IIR filters are designed for these inverted responses • Overall gains are treated separately • Filters are applied to up-sampled error-point to give better filter response R&D Hannover July 2004

  14. Generating loop-gain correction signals • A full set of IIR filters has be constructed to match the response of the feedback electronics in the detection band • One set for fast feedback, one set for slow feedback • Error-point signal is filtered through these electronics filters and then through actuator filters • This produces two ‘displacement’ signals that correct for the loop gain of the MI servo R&D Hannover July 2004

  15. Calibration pipeline R&D Hannover July 2004

  16. S3 II recovered parameters R&D Hannover July 2004

  17. Pros and cons • Pros • Calibration is updated once per second • Accuracy to ~10% from 50Hz to 6kHz • Runs on-line with 2 min latency – time-domain! • Produces calibrated time-series – h(t) • Cons • Fast (>1Hz) optical gain fluctuations ignored • Outwith valid frequency range, accuracy is poorer • Bottom line is ESD calibration – good to about 5% • Need independent check of ESD • Photon pressure calibrator R&D Hannover July 2004

  18. c2 behaviour • The measure of success from the optimisation routine tells us something about data quality • c2 also depends on SNR of calibration lines in P R&D Hannover July 2004

  19. Quality channel • Is one 16-bit sample per second • Encodes information from • Lock status • Maintenance status • c2 threshold crossings • So far, c2 thresholds have been chosen arbitrarily R&D Hannover July 2004

  20. Calibration simulations • Simulations done for only open-loop detector • Red signals are output to frame files • Normal calibration code is run on these frames R&D Hannover July 2004

  21. Simulation results - c2 v SNR R&D Hannover July 2004

  22. Parameter recovery – SNR = 100 c2 R&D Hannover July 2004

  23. Measured c2 behaviour R&D Hannover July 2004

  24. Measured c2 behaviour R&D Hannover July 2004

  25. Measured c2 behaviour noise estimation (s2) R&D Hannover July 2004

  26. Current and future work • Q quadrature parameters are now successfully estimated • Something not fully understood about Q response • Makes unstable IIR filter • More studies of c2 values for P+Q simulations • More studies of c2 values for P+Q ‘real’ data • How to combine h(t)_P and h(t)_Q ? R&D Hannover July 2004

More Related