1 / 53

CSE 554 Lecture 6: Deformation I

CSE 554 Lecture 6: Deformation I. Fall 2011. Review. Source. Alignment Registering source to target by rotation and translation Rigid-body transformations Methods Aligning principle directions (PCA) Aligning corresponding points (SVD) Iterative improvement (ICP) Combines PCA and SVD.

tpeggy
Download Presentation

CSE 554 Lecture 6: Deformation I

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. CSE 554Lecture 6: Deformation I Fall 2011

  2. Review Source • Alignment • Registering source to target by rotation and translation • Rigid-body transformations • Methods • Aligning principle directions (PCA) • Aligning corresponding points (SVD) • Iterative improvement (ICP) • Combines PCA and SVD Input Target After PCA After ICP

  3. Non-rigid Registration • Rigid alignment cannot account for shape variance • Non-rigid deformation can give a better fit Source Target Rigid alignment After non-rigid deformation

  4. Non-rigid Registration • A minimization problem • Minimizing the distance between the deformed source and the target • “Fitting term” • Minimizing the distortion to the source shape • “Distortion term”

  5. Intrinsic vs. Extrinsic • Intrinsic methods • Deforms points on the source curve/surface • App: boundary curve or surface matching • Extrinsic methods • Deforms all points on and interior to the source curve/surface • App: image or volume matching

  6. Laplacian-based Deformation • An intrinsic method • Simple to implement, produces reasonable results • Preserving local shape features • Widely used in graphics applications for interactive deformation • Reference: “Laplacian surface editing”, by Sorkine et al., 2004 (citation > 300)

  7. Setup • Input • Source with n points: p1,…,pn • Target with m points (m<=n): q1,…,qm • Corresponding to first m source points • Output • Deformed locations of source points: p1’,…,pn’ Deformed Source q2 p3=q3 p1=q1 p2 An example with 3 target points, two of which are stationary (red)

  8. Overview • Finding deformed locations pi’ that minimize: • Ef: fitting term • Measures how close are the deformed source to the target • Ed: distortion term • Measures how much the source shape is changed

  9. Fitting Term • Sum of squared distances between corresponding points • Over all pairs of source and target points q2 p2

  10. Distortion Term • Q: How to measure shape? • A: By “bumpiness” at each vertex • Laplacian: vector from the centroid of neighbors to the vertex • Recall that in fairing, we reduced this vector to “smooth out” bumps • A linear operator over point locations where Ni={i1,i2,…} are indices of neighboring vertices of pi

  11. Distortion Term • Minimizing changes in Laplacians during deformation • Over all source points i: Laplacian at pi before deformation

  12. Putting Together • Finding deformed locations pi’ that minimize: • A quadratic equation in terms of variables (pix’, piy’, piz’) • qi, i are constants • L[] is a linear operator

  13. Quadratic Minimization • A general form of quadratic minimization: • There are s variables: x=(x1,…,xs)T • Each a1,…, ak is a length-s column vector (linear coefficients) • Each b1,…, bk is a scalar (constant coefficients) • k should be greater than s

  14. Quadratic Minimization • Re-writing our minimization in the general form • In 2D, there are 2n variables: x = (p1x’,…, pnx’, p1y’,…, pny’ )T • In 3D, there are 3n variables • We will next re-write each quadratic term in 2D as (aix-bi)2 • Can be extended easily to 3D

  15. Quadratic Minimization • The ai and bi in the fitting term • There are 2m quadratic terms • In the first set of m terms: • For i=1,…,m, bi=qix, ai contains all zero, except its (i)th entry is 1. • In the second set of m terms: • For i=1,…,m, bi+m=qiy, ai+m contains all zero, except its (i+n)th entry is 1

  16. Quadratic Minimization • The ai and bi in the fitting term • There are 2m quadratic terms • Example with 3 vertices and 2 fitting constraints (n=3; m=2):

  17. Quadratic Minimization • The ai and bi in the distortion term: • There are 2n quadratic terms • The first set of n terms: • For i=1,…,n, ai is all zero except the (i)th entry is 1, the (j)th entries are -1/|Ni| for all jNi, and bi=ix • The second set of n terms: • For i=1,…,n, ai+n is all zero except the (i+n)th entry is 1, the (j+n)th entries are -1/|Ni| for all jNi, and bi+n=iy

  18. Quadratic Minimization • The ai and bi in the distortion term: • There are 2n quadratic terms • Example with 3 vertices (n=3):

  19. Quadratic Minimization • To solve: • Re-write in matrix form: where is a k by s matrix is a length-k vector

  20. Quadratic Minimization • The minimizer is where the partial derivatives are all zero • We have:

  21. Summary

  22. Results Deformed A small deformation

  23. Results Deformed A larger deformation

  24. Results Deformed Rotation

  25. Results Deformed Stretching

  26. Results Deformed Shrinking

  27. Discussion • Limitations • Local features are “skewed”, and they don’t scale with the model • Reason: Laplacian changes with rotation or scale • Two bumps that differ by rotation or scale have different Laplacians • Which will be penalized by our distortion term

  28. A Better Distortion Term • Not penalizing rotation and scaling of local features • Transforming the original Laplacian vectors before comparing to the deformed Laplacians • Tiis a matrix that describes how the local shape around pi is deformed • Including translation, rotation and isotropic scaling • Collectively called similarity transformations • Entries of Ti are linear forms of variables pi’ • So that the minimization problem is still quadratic

  29. Some Questions • How to represent similarity transformations as matrices? • How to compute Ti so that it is linear in the deformed points? • We will focus in the derivations of the 2D case • 3D results will be briefly presented at the end

  30. Similarity Transforms (2D) • Homogeneous coordinates • A 2D point: (x,y,1) • A 2D vector: (x,y,0) • A 3D point: (x,y,z,1) • A 3D vector: (x,y,z,0)

  31. Similarity Transforms (2D) • Translation • Cartesian coordinates: vector addition • Homogeneous coordinates: matrix product

  32. Similarity Transforms (2D) • Isotropic scaling • Cartesian coordinates: vector scaling • Homogeneous coordinates: matrix product

  33. Similarity Transforms (2D) • Rotation • Cartesian coordinates: matrix product • Homogeneous coordinates: matrix product

  34. Similarity Transforms (2D) • Summary of elementary similarity transformations • To combine transformations: take the product of these matrices Translation by vector v Scaling by scalar s Rotation by angle 

  35. Similarity Transforms (2D) • General similarity transformations • The product of any set of elementary matrices can be written this way • Any choice of (a, w, tx, ty) can be written as a sequence of rotation, isotropic scaling and translation • Note that a and w can’t be both zero

  36. Computing Ti (2D) • Suppose we know the deformed locations pi’ • Compute Ti as the similarity transform that best fits the neighborhood of pi to that of pi’ • This is a quadratic minimization problem for entries of Ti • E.g., a, w, tx, ty

  37. Computing Ti (2D) • The matrix form of the minimization is: where is a 2|Ni|+2 by 4 matrix, and Ni={i1, i2,…} are indices of neighboring vertices of pi

  38. Computing Ti (2D) • By quadratic minimization: • Linear expressions of variables (pix’ , piy’)

  39. Distortion Term (2D) • Two parts of each distortion term: • Transformed Laplacian: • Laplacian of the deformed locations: where where is a 2 by 2|Ni|+2 matrix

  40. Distortion Term (2D) • Putting together: • They form 2n quadratic terms (aix-bi)2 for x = (p1x’,…, pnx’, p1y’,…, pny’ )T • All bi are zero • Each ai can be extracted from H where and are its rows

  41. Results (2D) Old distortion term New distortion term

  42. Results (2D) New distortion term Old distortion term

  43. Results (2D) Old distortion term New distortion term

  44. Results (2D) Old distortion term New distortion term

  45. Registration • Use nearest neighbors as corresponding target locations • Assuming the source is already close to the target • Iterative closest point (ICP) • 1. For each point on the source, assign its closest point on the target as its corresponding point. Compute Laplacian-based deformation. • A threshold on the closest distance can be used to throw away unlikely correspondences • 2. Repeat step (1) until a termination criteria is met. • Maximum iteration or minimum RMSD improvement

  46. Result After rigid alignment 1 iteration of Laplacian 7 iterations of Laplacian Overlaying all curves

  47. Result • Weighting the distortion term large w medium w small w

  48. Similarity Transforms (3D) • Elementary transformation matrices • To perform a sequence of transformations: take the product of these matrices Translation by vector v Scaling by scalar s Rotation by angle  around X axis

  49. Similarity Transforms (3D) • General similarity transformations in 3D • Approximates the product of a set of elementary matrices • Up to a small rotation angle • May introduce skewing for large rotations

  50. Computing Ti (3D) • Assuming known deformation, by quadratic minimization: • Linear expressions of the deformed points pi’ • C is a 3|Ni|+3 by 7 matrix where

More Related