What Can Be Done To Optimize The pH Balance Of Cooling Tower Water

1. What Can Be Done To Optimize The pH Balance Of Cooling Tower Water

2. Having proper chemistry for the cooling tower water is an integral part of maintaining it well. The maintenance of cooling tower quality is a multi-step approach to the process. Below mentioned steps will make sure you have good enough chemistry in the cooling tower water. This is an ongoing process; practising it once is not enough; you have to keep using the same method periodically to maintain the water chemistry in a cooling tower, for it requires constant vigilance and control. Here’s what you can do to optimize the pH balance of cooling tower water

3. 1. Determine Water Quality Measure your cooling tower’s pH, hardness, alkalinity and conductivity. The measurements of these elements will create a baseline for where the water started before the treatment. The numbers play a huge part in scale formation or corrosion; you should measure the cooling tower water, hardness, alkalinity, and conductivity. 2. Set up target cycles of concentration Use the makeup water quality when you want to set up target cycles of concentration. The makeup water value quality usually depends on either the municipality or the company treating your cooling tower water. Identify the Cycles of Concentration (COC) for COC and water efficiency are usually directly linked; hence keeping track of COC pays off in terms of seeing if your facility is losing water. It is of utter importance to balance the requirement of keeping out scale formation and the need for efficiency through a number of cycles of concentration.

4. 3. Keep track of COC and water performance Constantly monitoring the chemical balance in your water is an essential part of maintaining your cooling tower water treatment. Make use of real-time monitors, which will get you the most accurate and up-to-date information reflecting changes in evaporation and water use. Get the most out of the data you collect by attaching these monitors with automated devices. Periodic monitoring of the COC and water quality can tell if your water is at the optimum balance in order to prevent the formation of scale, bacterial formation and corrosion. 4. Automate your processes Install an automated chemical dispenser to cut down the needless chemical usage which is present in your cooling tower water; it will help regulate the water chemistry automatically. Devices like this help chemicals to treat the water in response to chemical levels outside preset values. When water chemistry is real-time, it improves the efficiency of these devices while sticking to the requirement of frequently monitoring the water.

5. 5. Protect your cooling tower You have to take measures to protect your equipment despite having adequate monitoring of water chemistry and automatic chemical controls. Cooling towers tend to experience corrosion time and again, even in a well-controlled environment. Verify how well the water treatment works measure wear rates using coupons. Make sure you don’t skip any regular inspections and repairs of your equipment. If you miss out on the equipment’s periodic monitoring, you will not have the essential data required to make accurate changes to the water chemistry.

6. Website https://www.towertechindia.com/ Phone Number Contact Us +91-9925247842 Email Address WE'DLOVETOHEARFROMYOU! towertech@towertechindia.com