1 / 53

Geology from Geo-neutrino Flux Measurements

Geology from Geo-neutrino Flux Measurements . Eugene Guillian / Queen’s University DOANOW March 24, 2007. Content of This Presentation. KamLAND: The Pioneering Geo-neutrino Detector Proved that geo-neutrinos can be detected, but under very unfavorable conditions

topper
Download Presentation

Geology from Geo-neutrino Flux Measurements

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Geology from Geo-neutrino Flux Measurements Eugene Guillian / Queen’s University DOANOW March 24, 2007

  2. Content of This Presentation • KamLAND: The Pioneering Geo-neutrino Detector • Proved that geo-neutrinos can be detected, but under very unfavorable conditions • How to proceed in the next generation • 10  KamLAND (size  time) • Low background • Simple neighboring geology • Multiple sites • How to extract geological information from flux measurements • 1 site • 2 sites • Statistical sensitivity • Effect of nuclear reactor background • Possible applications

  3. Geo-neutrinos • Produced in the radioactive decay of unstable isotopes • The flux of geo-neutrinos depends on: • Total mass of these isotopes in the earth • The distribution of the isotopes in the earth

  4. Total Isotopic Mass in the Earth • An educated guess: • CI carbonaceous chondrite meteorite • Representative of the raw material from which the earth was formed • Based on the isotopic abundances in this type of meteorite, estimate the initial elemental abundance • Evolution of the early earth • Core separation • Bulk Silicate Earth (BSE) • Crust extraction from BSE

  5. Crust Extraction from the Mantle • Uranium, thorium, and potassium are all lithophile elements • They have a strong tendency to leave the mantle and stay in the crust • A good starting guess about isotope concentrations:

  6. More Detailed Earth Models • Examples: • Mantovani et al., Phys. Rev. D 69, 013001 (2004) • S. Enomoto, Ph. D. Thesis, Tohoku University (2005) • Turcotte et al., J. Geophys. Res. 106, 4265-4276 (2001)

  7. The Mantovani et al. Reference Model • Note: These are just educated guesses • There is considerable spread in what could “reasonably” be assigned to these values

  8. S. Enomoto Reference Model

  9. Turcotte et al. Models • These models argue for significant level of selective erosion of crustal uranium, and subsequent recycling into the upper mantle. • Mantle convection boundary is deeper than the 660 km seismic discontinuity (1200 ± 200) km

  10. The Overall Picture of Geo-neutrinos • The models differ in: • The number of geological subdivision • The assignment of isotopic concentrations in each subdivision • But, at the very basic level, similar (i.e. within a factor of several) geo-neutrino fluxes are predicted • The flux at the surface of the earth is ~106 cm-2 s-1 • The flux varies by a factor of several depending on the location

  11. A Neutrino Flux Map: Example • The color scale is Y = yield (number of detected events per unit of exposure)

  12. A Note on Units: The Scale of Things • Geo-neutrino flux units • Several  106 cm-2 s-1 • Geo-neutrino detection rate (yield) • 1032 p-yr • The number of geo-neutrino events that can be detected with 1032 free protons exposed for 1 year • For a typical target, 1032 free protons is about 1000 tonne • The volume is about the size of a large room Several million geo-neutrinos stream through a penny every second

  13. e+ kinetic energy M(e+) = 0.5 MeV En - 1.8 MeV 1.8 MeV Mn - Mp = 1.3 MeV Detecting Geo-neutrinos with a Liquid Scintillator Detector • Inverse Beta Decay Anti-neutrino Free Proton Neutron Positron Prompt energy deposition En - 0.8 MeV • 1.8 MeV energy threshold Energy Input Deposited Energy e+ kinetic energy En - 1.8 MeV M(e+) = 0.5 MeV 1.0 MeV from e+-e- annhilation M(e-) = 0.5 MeV

  14. Detecting Geo-neutrinos • Delayed energy deposition • Neutron thermalization & capture on free proton • ~200 micro-second • 2.2 MeV gamma rays • Prompt-delayed correlation • Reduces background noise to a very low level Delayed Prompt

  15. 1.8 MeV Energy Threshold • Only the highest-energy anti-neutrinos from 238U and 232Th are detectable • 40K is not detectable with this technology Nature 436, 499-503 (28 July 2005)

  16. Inverse Beta Decay Cross Section • Cross section • The effective cross sectional area of a free proton from the point of view of a geo-neutrino • ~10-43 cm2 • Geo-neutrino flux: • ~106 cm-2 s-1 = ~1013 cm-2 yr-1 • Probability that a particular free proton will be hit by a geo-neutrino in one year: Extremely small! ~10-43 cm2 ~1013 cm-2 yr-1 = ~10-30 per year • This determines the necessary target size • A detector with 1032 free protons should see ~1032 10-30 = ~100 events

  17. The Fine Print • Detection efficiency ≈ 70% • Neutrino oscillation • When geo-neutrinos travel more than ~50 km, it becomes a mixture of undetectable types of anti-neutrinos • This effect reduces the detectable flux by about a factor of 0.57

  18. Extracting Geological Information from a Geo-neutrino Flux Measurement • Example: Flux at Sudbury • Assumes the S. Enomoto reference model, which determines: • The total flux at Sudbury • The relative contributions from 238U and 232Th 0.459·NU 0.541·NU NTh • Region 1: • N1 = NTh + 0.459·NU • Region 2: • N2 = 0.541·NU Region 1 Region 2

  19. Extracting Geological Information from a Geo-neutrino Flux Measurement • N1 and N2 are the measured quantities • NU and NTh are quantities that carry geological information It is possible to separately measure the uranium and thorium flux

  20. Upper Limit on the Sensitivity • The statistical error sets the upper limit on the sensitivity to the geo-neutrino flux measurement Mantovani et al. Ref. Model, 1033 p-yr The sensitivity scales with exposure as:

  21. What Does the Flux Tell Us about the Earth?

  22. Analyzing the Flux Formula Earth models (not well known) Constant (accurately known) Relatively well-determined through seismic tomography The goal of neutrino geology is to learn about aX(r) from measurements of FX(r)

  23. What Can We Learn about Isotope Concentrations from a 1-site Measurement? • We can get the isotope concentration averaged over the entire earth • But the information about the isotope distribution in the earth and the total amount of isotopes is poorly determined • One can distribute X between the mantle and crust to produce the same answer • The constraint on models is weak

  24. Neutrino Geology in the Near Future • KamLAND was the pioneering neutrino geology detector

  25. Goals for the Coming Generation

  26. A 2-site Geo-neutrino Measurement: An Example • Two measurements • Can solve for two unknowns • The continental crust and mantle account for most of the observed geo-neutrinos, regardless of the detector location • The two unknowns: • Average isotope concentration in the continental crust • Average isotope concentration in the mantle • The small contribution from other geological subdivisions is approximated as being zero

  27. An Example of a 2-Site Measurement • The mantle contribution is the same at both sites • Assume that the mantle is spherically symmetric • A large contrast in the continental crustal component exists • The contribution from other geological structures is negligible

  28. Flux vs. Concentration Equations

  29. Geologic Integrals Unit: g/cm Continental Crust ( 1016 g/cm) 148 Mantle

  30. Solving for the Concentrations 22 Matrix Equation 1016 Uranium Flux Geologic Integral Matrix Solution of the unknown quantities in terms of the measured ones

  31. Statistical Sensitivity of 2-Site Measurements • Exposure = 1033 p-yr • Model = Mantovani et al. Reference • Oceanic site = Hawaii • Vary the “continental” sites Concentration / 238U / Continental Crust Concentration / 238U / Mantle Upper CC Input Lower Mantle Input Middle CC Input Lower CC Input Upper Mantle Input Statistical Uncertainty ≈ 12% Statistical Uncertainty ≈ 24%

  32. Statistical Sensitivity for Th Concentrations Concentration / 232Th / Continental Crust Concentration / 232Th / Mantle Upper CC Input Lower Mantle Input Middle CC Input Upper Mantle Input Lower CC Input Statistical Uncertainty ≈ 34% Statistical Uncertainty ≈ 77%

  33. S. Enomoto Reference Model ≈ 12% ≈ 22% ≈ 68% ≈ 36%

  34. Turcotte et al. Model I ≈ 22% ≈ 14% ≈ 38% ≈ 49%

  35. Turcotte et al. Model II ≈19% ≈17% ≈ 40% ≈58%

  36. Radiogenic Heat Measurement Heat from continental crust • The radiogenic heat is derived from the concentrations 40K term Heat from mantle

  37. Heat Measurements Mantovani Turcotte I Turcotte II Enomoto Continental Crust ≈25% ≈23% ≈19% ≈18% ≈28% Mantle ≈36% ≈40% ≈24% ≈17% ≈16% Total ≈15% ≈16% Dashed blue line: Estimated 40K contribution

  38. Background Noise • KamLAND from several years ago tells us a lot about background noise Nature 436, 499-503 (28 July 2005) • Internal background • 13C(a,n)16O (radon gas contamination) • External background • Anti-neutrinos from nuclear reactors N = 152 Nuclear Reactor 13C(a,n)16O

  39. Internal Background • A lot of R & D by the KamLAND team and others have taken place since the first geo-neutrino measurement • Make use of the R & D results, and learn from experience: • Make sure the liquid scintillator and other internal detector components have minimal exposure to radon gas • Use newly developed purification techniques to remove 210Pb (radioactive lead) from the liquid scintillator Assume that the internal background can be reduced to a negligible level

  40. Reactor Anti-neutrino Background • The only way to minimize this is to place the detector as far as possible from nuclear reactors Map of heat production by world-wide nuclear reactors ≈ 478 nuclear reactors world-wide ~30 to 40 TWt total heat Total generated heat ≈ 1.1 TWt ~20 to 30 TWt radiogenic heat

  41. Log-scale background rate (arbitrary units) Reactor Anti-neutrino Background Rate • Exposure = 1033 p-yr • Detection Efficciency = 0.70 • Reactor Duty Cycle = 0.80

  42. Subtracting the Reactor Background Region 3 En - 0.8 MeV Region 1 Region 2

  43. Sensitivity with Reactor Background

  44. Sensitivity with and without Reactor Background Example: Mantovani et al. Ref. Model No Reactor With Reactor

  45. Change in Sensitivity: Concentrations

  46. Change in Sensitivity: Heat • Red Points: No Reactor • Blue Points: With Reactor • Vertical Axis: Sensitivity (%) • Horizontal Axis: Location

  47. Testing Geological Models • Examples of what kind of sensitivity the next-generation geo-neutrino measurements might have to geological models • Distinguishing the Turcotte et al. models from the “Reference” models • What can we say about the Th/U ratio? • How well can we constrain radiogenic heat?

  48. The Turcotte et al. Models Oxidized atmosphere (2 Ga) made U soluble in H2O, but not Th. U gets recycled into the upper mantle. Mantle convection occurs only in UM. Mass of UM ≈ 0.5 times total mantle mass. • k = Th/U concentration ratio • BSE: k = 4 • Continental Crust: k = 5-6 • Upper Mantle: k = 2.5 • Lower Mantle: k = 4 • Mass balance of 238U between CC and UM • k for CC and UM combined must be 4 Primitive value

  49. Concentration Measurements for Different Models We can distinguish the mantle concentration of 238U of Turcotte I from those of “Reference” models • 2 sites = Hawaii & Sudbury • 1033 p-yr 238U/CC 238U/Mantle 232Th/CC 232Th/Mantle

More Related