1 / 16

SIMATIC Industrial Automation System

SIMATIC Industrial Automation System. System family. High-performance range. PC-based Control. Controllers. S7-400. Medium range. Control system C7. S7-300. Micro PLC. S7-200. + Programming devices + STEP 7 software + Distributed I/O + Human machine interface.

theodorejohnson
Download Presentation

SIMATIC Industrial Automation System

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. SIMATICIndustrial Automation System

  2. System family High-performance range PC-basedControl Controllers S7-400 Medium range Controlsystem C7 S7-300 Micro PLC S7-200 + Programming devices + STEP 7 software + Distributed I/O + Human machine interface

  3. SIMATIC S7-300 - the universal PLC • High level of efficiency • Compact design requiring a minimum amount of space, e.g. CPUs only 40 mm wide • Graded line of CPUs • Integrated communicationsinterfaces • Maintenance-free • Wide range of applications • Extensive line of modules for an exceptionally wide variety of applications, such as closed-loop control, positioning and cam control • Line of fail-safe CPUs: fail-safe and standard applications on a single CPU, making separate fail-safe controller unnecessary Controllers • System solutions for production engineering

  4. SIMATIC S7-400 – our most powerful PLC • High performance • High processing speeds and determinism for short machine cycle times • Isochrone mode for controlling high-speed machines • Communication included • Multicomputing • Space-saving thanks to the highest channel density among I/O modules • Wide range of applications • Special machines, plant construction, process industry • High-availability and fail-safe applications Controllers • System solutions for production and process engineering

  5. SIMATIC WinAC – PC-based Control • PC-based Automation with WinAC • Control, data processing, communication, visualization and technology on a single PC • Use of open PC-Standards (OPC, ActiveX) • Integration of existing C/C++ libraries and PC hardware • Wide range of applications • Software PLC for data-intensive applications and for real-time applications with deterministic behaviour • Slot PLC with its own safety on board • Software PLC for the Multi Panel MP 370 – the compact and rugged solution Controllers • SIMATIC WinAC – the flexible basis for innovative solutions

  6. Control Systems SIMATIC C7 • S7-300 and Operator Panel in a single compact device • Location direct at the machine • Less mounting effort through ready-to-use complete solution • Less initial costs compared to modular solution Controllers • Complete machine controls in the most restricted possible space

  7. SIMATIC Safety Integrated – From proprietary solutions to failsafe PLCs Previous solution New solution with SIMATIC Safety Integrated Failsafe and fault-tolerant systems EMERG-ENCY-OFF EMERG-ENCY-OFF EMERG-ENCY-OFF EMERG-ENCY-OFF Standard I/ODP slave Standard and failsafeI/O DP slave StandardSIMATICPLCs Standardand failsafePLCs EMERG-ENCY-OFF EMERG-ENCY-OFF StandardI/O DP slave Standardand failsafeI/O DP slave Failsafethird-partyPLCs POFIBUS PROFIBUS with PROFIsafe profile e.g. Safety bus

  8. Fault-tolerant SIMATIC S7 Fault-tolerant systems Fault-tolerant,failsafe systems Failsafe and fault-tolerant systems SIMATIC S7-400H • The fault-tolerant SIMATIC S7 for time-critical processes with switchover times < 100 ms SIMATIC S7 Software Redundancy • The software solution for non-time-critical processes with switchover times in the seconds range SIMATIC S7-400FH • The fault-tolerant SIMATIC S7 for time-critical processes with switchvoer times < 100 ms • Compliance with the highest safety grades • IEC 61508 (to SIL 3) • EN 954 (to Category 4) • IEC 61511 • NFPA 79 – 2002

  9. SIMATIC ET 200 Distributed I/O The right solution for any requirements • Benefits • Saves space in the control cabinet • Cuts down on the amount of wiring • Solutions for control cabinets • From bit modular to block I/O • With motor starters and failsafe modules • For potentially explosive atmospheres • Solutions without control cabinets • Modular, integrated motor starters and frequency converters • Low-cost block I/O • Solution for robots, resistant to welding chips Distributed I/O

  10. SIMATIC PCS 7 Process Control System – Fulfills all requirements made on a modern DCS • Uniform automation for production and process engineering based on SIMATIC • Plant-wide, consistent engineering for all components based on a common database • Flexibility attained through scalable performance and modular design • Distribution near the process too with intrinsically safe PROFIBUS PA • Highlights of the new version • Configuration modifications during operation • Very large framework quantities and high performance • Much shorter engineering and turnaround times • Extremely powerful batch system with validation support PCS 7

  11. Operation • Diagnostics • Remote maintenance • Test / Commissioning • Simulation • Diagnostics • Test functions Shorter test phase • Programming • Standard languages • Task-oriented • Hardware configuring • Controllers • I/Os • Networks Faster configuration SIMATIC Software - For all phases of a project Software /Programmers

  12. SIMATIC PC – always the right industrial PC Modern PC technology in rugged and industrial design • SIMATIC Box PC for machine level use • SIMATIC Rack PC for 19“ control cabinets and consoles • SIMATIC Panel PC for use direct at the machine, in consoles or in control cabinets PC-based Automation

  13. Always completely in the picture withSIMATIC Machine Vision • Intelligent Vision Sensors for application-specific image processing • VS 110 – Form inspection • VS 120 – Object inspection • VS 130 – Data-Matrix-Code Reader • General Purpose Systems – for universal use in any production system • VS 710 Smart Camera • VS 720-series: • VS 721 CMOS • VS 722 Basic • VS 723 Performance • VS 724 High Resolution • VS 725 Color Machine Vision

  14. SIMATIC HMIOperator Devices for any Requirements • Complete, price-optimized family for applications near or at the machine:From the pushbutton control Panel up to Panel PC • For stationary or mobile use • High operating convenience with ergonomic keypad or intuitive touchscreen • Rugged and compact • Great variety of PLCs can be connected • Comprehensive language supportincluding Asian languages • One uniform configuration software: SIMATIC ProTool HMI / NET

  15. Micro Automation – Logic module LOGO! • High functionality • 34 ready to use functions • 130 connectable blocks • Display with backlit • Max. 24DI/8AI/16DO • Different expansion modules • Simple programming • On the device or on the PC with LOGO!Soft Comfort • Connection of functions via drag and drop • Offline-Simulation and Online-Test • Professionell Documentation LOGO!Pure Micro Automation • Low-priced solution for small automation tasks LOGO!Basic

  16. Micro Automation – Micro PLC S7-200 • Modular with 5 CPU´s • Open in communication • On-board communication (PPI) • PROFIBUS slave • AS Interface master • Modem communication • Ethernet and Internet connection • Outstanding real-time response • Simpliest programming with 13 wizards • Extensive command set • Operating and monitoring with SIMATIC Text Display or Touch Panel • SIMATIC S7-200 • Low-priced PLC´s with extensive performance. Micro Automation

More Related