1 / 18

Chapter 10 Heat Transfer and Change of Phase

Chapter 10 Heat Transfer and Change of Phase. Conduction. Heat transfer through material by atoms & electrons colliding inside the object being heated Solids whose atoms or molecules have loosely held electrons are good conductors of heat (ie. Metals)

temple
Download Presentation

Chapter 10 Heat Transfer and Change of Phase

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Chapter 10Heat Transfer and Change of Phase

  2. Conduction • Heat transfer through material by atoms & electrons colliding inside the object being heated • Solids whose atoms or molecules have loosely held electrons are good conductors of heat (ie. Metals) • Poor conductors of heat are called insulators • Wood is a good insulator even when its red hot • Air is a very poor conductor of heat.

  3. Conduction cont. • Good insulating properties are largely due to air spaces between molecules • Snow is a poor conductor • Insulation does not stop heat transfer, only slows it down

  4. Convection • Heat transfer by motion of a fluid (liquid or gas) by currents • Figure 10.4 As the fluid is heated the molecules move faster, spread out and become less dense. The denser, cooler fluid migrates to the bottom.

  5. Convection currents stir the atmosphere and produce winds

  6. Radiation • Heat transfer through radiant energy (electromagnetic waves) • For example, from the sun to the earth through mostly empty space • Good absorbers of radiant energy are also good emitters • A dark object that absorbs plenty of radiant energy must emit a lot as well • Figure 10.11 When the containers are filled with hot (or cold) water, the darker one cools (or warms) faster • Every surface, hot or cold, both absorbs and emits radiant energy.

  7. Heat transfer occurs whenever matter changes phase – adding thermal energy changes phase from solids to liquids to gasses to plasma

  8. Melting • Substance changing from a solid to a liquid • When a solid is heated the heat is absorbed and the molecules vibrate more violently and the attractive forces between the molecules can no longer hold them together • During melting added thermal energy increases the potential energy of the molecules breaking the bonds that hold them together, not the kinetic energy – temp. does not increase

  9. Evaporation • A change of phase from liquid to gas at the surface of the liquid • Molecules at the surface gain kinetic energy by being bumped • As water is heated, some molecules gain more energy than others; ones with most energy break free leaving molecules with less energy then dropping the temperature of the liquid • Perspiration to cool our body temperature

  10. Vaporization or Boiling • Evaporation within a liquid • Bubbles of vapor form in the liquid and rise to the surface, where they escape • At the boiling point, any added thermal energy is used to increase the potential energy of the molecules, not the kinetic energy. Therefore, the temperature does not change during boiling

  11. Sublimation • A change of phase from solid to gas • Ex. Snow, ice cubes, etc.

  12. Condensation • Change of phase from gas to liquid • When gas molecules near the surface of a liquid are attracted to the liquid, they strike the surface with increased kinetic energy and become part of the liquid resulting in a rise in temperature • Steam burns

  13. Why do you feel warmer in the moist shower area than outside the shower?

  14. Why do they say “its not the heat, it’s the humidity” to compare the climate in Arizona to the climate in Wisconsin?

  15. Freezing • Liquid changes to solid • Liquid freezes when its molecules vibrate about fixed positions and form a solid

  16. Energy needed for changes in phase • Whenever a substance changes phase, a transfer of energy occurs • Heat of fusion – the amount of energy needed to change any substance from solid to liquid (and vice versa) • Heat of vaporization – the amount of energy required to change any substance from liquid to gas (and vice versa)

  17. http://mutuslab.cs.uwindsor.ca/schurko/animations/waterphases/status_water.htmhttp://mutuslab.cs.uwindsor.ca/schurko/animations/waterphases/status_water.htm

More Related