1 / 24

THEMIS IDPU FSW V4 Mission Profile Tests Peter Harvey

THEMIS IDPU FSW V4 Mission Profile Tests Peter Harvey. Agenda. Mission Profile Testing Overview Solid State Memory Storage Areas Slow and Fast Survey Particle Burst and Wave Burst Data Rate Determination Compression Calculation. Orbital Events. Orbital Events of Interest Launch

Download Presentation

THEMIS IDPU FSW V4 Mission Profile Tests Peter Harvey

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. THEMIS • IDPU FSW V4 • Mission Profile Tests • Peter Harvey

  2. Agenda • Mission Profile Testing • Overview • Solid State Memory Storage Areas • Slow and Fast Survey • Particle Burst and Wave Burst • Data Rate Determination • Compression Calculation

  3. Orbital Events • Orbital Events of Interest • Launch • Perigee Altitude = 445 km ± 6 km • Apogee Altitude = 84191 km ± 9567.0 km • Inclination = 13.4 degrees ± 0.5 deg • PCA MASS = 775.6 kg CBE, 829 NTE • Commissioning to Science Orbits • (P1) 1.5 x 30.9 RE, 7deg inclination, Orbit Period 96 hrs • (P2) 1.2 x 19.8 RE, 7deg inclination , Orbit Period 48 hrs • (P3) 1.2 x 12.0 RE, 9 deg inclination , Orbit Period 24 hrs • (P4) 1.2 x 12.0 RE, 9 deg inclination , Orbit Period 24 hrs • (P5) 1.4 x 10.0 RE, 9 deg inclination , Orbit Period 19.2 hrs • Eclipse Entry / Exit • Radiation Belt Entry / Exit • Plasma Pause • Conjunction • Bowshock • MAG Ranging

  4. P1 P2 P4 P5 P3 GBO Science Objectives • Science Objectives • Observe Onset and Evolution of Magnetospheric Substorm Instability, and Time History of Auroral Eruption, Current Disruption and Lobe Flux Dissipation at the Substorm Meridian • 5 Space Probes and 20 Ground Based Observatories

  5. Region Crossings & Triggers

  6. P2 ORBIT EVENTS TAIL SEASON 42:00: PASS START /IDPURAWHEX 1084 ;ENABLE BURST XMIT /ITMENABLE F ;PLAY ALL SEGMENTS WAIT 1 /ITMPLAY ;ENGAGE 30:00: SLOW SURVEY MODE /IDPURAWHEX 1005 ;TRIGGER DISABLE /IDPURAWHEX 1003 ;WBURST DISABLE /IDPURAWHEX 1002 ;PBURST DISABLE /IDPURAWHEX 1001 ;SLOW SURVEY /IDPURAWHEX B80F ;COMPRESS ALL 42:30: PASS END /IDPURAWHEX 1004 ;DISABLE BURST XMIT /ITMENABLE 0 ;STOP FIFO ACTIVITY Start ORBIT CONFIG PROC 47:00 MAG CAL ON 34:00: 100% COMPRESSED 00:00 01:00 MAG CAL OFF 06:00: BACKUP PASS 18:00: FAST SURVEY, BURSTING MODE /IDPURAWHEX 1081 ;FAST SURVEY MODE /IDPURAWHEX 1082 ;PBURST ENABLE /IDPURAWHEX 1083 ;WBURST ENABLE /IDPURAWHEX 1085 ;TRIGGER ENABLE Orbit Perigee/Apogee : 1.2 x 19.8 Re Orbit Period : 48 hours Fast Survey : 12 hours Compression: 4 hours

  7. P2 ORBIT EVENTS TAIL SEASON w/ ECLIPSE 42:00: PASS START /IDPURAWHEX 1084 ;ENABLE BURST XMIT /ITMENABLE F ;PLAY ALL SEGMENTS WAIT 1 /ITMPLAY ;ENGAGE 30:00: SLOW SURVEY MODE /IDPURAWHEX 1005 ;TRIGGER DISABLE /IDPURAWHEX 1003 ;WBURST DISABLE /IDPURAWHEX 1002 ;PBURST DISABLE /IDPURAWHEX 1001 ;SLOW SURVEY /IDPURAWHEX B80F ;COMPRESS ALL 42:30: PASS END /IDPURAWHEX 1004 ;DISABLE BURST XMIT /ITMENABLE 0 ;STOP FIFO ACTIVITY 47:00 MAG CAL ON 25:00: ECLIPSE EXIT /ISCRIPTEXEC 91 34:00: 100% COMPRESSED 00:00 01:00 MAG CAL OFF 23:00: ECLIPSE ENTRY /ISCRIPTEXEC 90 18:00: FAST SURVEY, BURSTING MODE /IDPURAWHEX 1081 ;FAST SURVEY MODE /IDPURAWHEX 1082 ;PBURST ENABLE /IDPURAWHEX 1083 ;WBURST ENABLE /IDPURAWHEX 1085 ;TRIGGER ENABLE Orbit Period : 48 hours Fast Survey : 12 hours Compression: 4 hours

  8. P2 ORBIT EVENTS DAY SEASON 42:00: PASS START /IDPURAWHEX 1084 ;ENABLE BURST XMIT /ITMENABLE F ;PLAY ALL SEGMENTS WAIT 1 /ITMPLAY ;ENGAGE 30:00: SLOW SURVEY MODE /IDPURAWHEX 1005 ;TRIGGER DISABLE /IDPURAWHEX 1003 ;WBURST DISABLE /IDPURAWHEX 1002 ;PBURST DISABLE /IDPURAWHEX 1001 ;SLOW SURVEY /IDPURAWHEX B80F ;COMPRESS ALL 42:30: PASS END /IDPURAWHEX 1004 ;DISABLE BURST XMIT /ITMENABLE 0 ;STOP FIFO ACTIVITY 47:00 MAG CAL ON 1:00: ECLIPSE ENTRY /ISCRIPTEXEC 90 34:00: 100% COMPRESSED 46:00: SOLAR WIND EXIT /ISCRIPTEXEC 81 00:00 2:00: SOLAR WIND ENTRY /ISCRIPTEXEC 80 01:00 MAG CAL OFF 1:10: ECLIPSE EXIT /ISCRIPTEXEC 91 18:00: FAST SURVEY, BURSTING MODE /IDPURAWHEX 1081 ;FAST SURVEY MODE /IDPURAWHEX 1082 ;PBURST ENABLE /IDPURAWHEX 1083 ;WBURST ENABLE /IDPURAWHEX 1085 ;TRIGGER ENABLE Orbit Period : 48 hours Fast Survey : 12 hours Compression: 4 hours

  9. P2 TAIL PROFILE TEST • REM • REM IDPU RESET AND CONFIGURE • REM • /IDPURESET • WAIT 12 • START C:\IDPU Testing\Scripts\IDPU\IDPU_INIT.CMD • REM • REM INSTRUMENT POWER ON AND CONFIGURE • REM • START C:\IDPU Testing\Scripts\IDPU\INST_ON.CMD • REM • REM LOAD ORBIT CONFIGURATION • REM • START C:\IDPU Testing\Scripts\IDPU\P2_TAIL_CONFIG.CMD • REM • REM RUN ORBIT PROFILE • REM • START C:\IDPU Testing\Scripts\IDPU\P2_TAIL_SIM.CMD

  10. P2 ORBIT CONFIG • P2 TAIL Configuration • REM • REM ENABLE BURST LOGIC TO CONTROL SSR • REM DISABLE ALL OTHER OPTIONS FOR INSTRUMENT LOADS • REM • /IDPURAWHEX 1101 ;SCIENCE CONTROL ONLY • WAIT 1 • REM • REM CONFIGURE INSTRUMENTS IN SLOW SURVEY MODE • REM • START C:\IDPU Testing\Scripts\FGM\FGM_RANGES_0.CMD • WAIT 4 • START C:\IDPU Testing\Scripts\FGM\SN05_Standard_Mode.s • WAIT 1 • START C:\IDPU Testing\Scripts\SST\SST_ETC_INIT_P2ORBIT.CMD • WAIT 1 • START c:\IDPU Testing\Scripts\ESA\ESA_ETC_INIT_P2ORBIT.CMD • WAIT 1 • REM • REM ENABLE SST READBACK • REM ENABLE SPIN FITS • REM • /IDPURAWHEX 1087 ;SCIENCE OPTS • /IDPURAWHEX 3807 ;E&B FITS ENABLED IDPU INIT (FOR TEST) REM REM IDPU LOAD SEGMAP V4 REM UPDATE THE SEGMENT MAP FOR PARTICLES REM /IDPURAWHEX 8503 ;SURVEY FOR ALL MODES /IDPURAWHEX 9F53 ; /IDPURAWHEX 9F54 ; /IDPURAWHEX 9F55 ; /IDPURAWHEX 9F57 ; /IDPURAWHEX 9F58 ; /IDPURAWHEX 9F5A ; /IDPURAWHEX 9F5B ; /IDPURAWHEX 9F5D ; /IDPURAWHEX 9F5E ; /IDPURAWHEX 8504 ;PBURST /IDPURAWHEX 9C56 ; /IDPURAWHEX 9C59 ; /IDPURAWHEX 9C5F ; /IDPURAWHEX 8500 ;NULL /IDPURAWHEX 9F5C ; WAIT 1 REM REM TEST POINTS REM /IDPUADRH 7F ;TESTVALUES = 66/77 /IDPUADRL FB ; /IDPULOAD 66 ; /IDPULOAD 77 ;

  11. P2 ORBIT SIM • P2 Orbit SIM • REM =========================================================== • REM P2_TAIL_SIM.CMD (48 HOUR PERIOD) • REM STARTS / ENDS POST PASS AT 06:30 • REM 5/30/06 • REM =========================================================== • WAIT 41400 ;06:30 SLOW SURVEY THROUGH TO 18:00 • START C:\IDPU Testing\Scripts\MPT\FAST_SURVEY.CMD • WAIT 43200 ;18:00 FAST SURVEY THROUGH TO 30:00 • START C:\IDPU Testing\Scripts\MPT\SLOW_SURVEY.CMD • /IDPURAWHEX B80F ;COMPRESS ALL • WAIT 86400 ;30:00 SLOW SURVEY THROUGH TO 06:00 • START C:\IDPU Testing\Scripts\MPT\PASS.CMD

  12. EEPROM Configuration • EEPROM CDI Tables (ref thm_efi_beb_tables_revC_.doc ) • F5 : B0 - EFI Low Density, Sun • F6 : B1 - EFI Low Density, Eclipse • F7 : B2 - EFI High Density, Sun • F8 : B3 - EFI High Density, Eclipse

  13. SCRIPTS

  14. FGM TM • Attitude Control / Calibration • Determine Probe Attitude Near Perigee • APID 405 ( 8 Hz x 3 Axes) Enabled at Perigee +/- 1 hour Slow Survey • APID 410 X-Y Sine Wave Least Squares Spin Fits & Z-axis Average Fast Survey • APID 460 3-Axis 16 bit samples at 4 Samples/Second Particle Burst • APID 461 3-Axis 16 bit samples at 128 Samples/Second REM =========================================================== REM MAG_CAL_ON.CMD REM 5/30/06 REM =========================================================== /IDPURAWHEX B101 ;FGE ENABLE /ISCMCAL 60 ;SCM CAL ON FOR 1 MINUTE REM =========================================================== REM MAG_CAL_OFF.CMD REM 5/30/06 REM =========================================================== /IDPURAWHEX B100 ;FGE DISABLE

  15. FGM RANGING • Magnetometer Ranging • FGM SIGNAL RANGE • RANGE = 0 to 8, Sliding 16-bit Window over 24-bit X,Y,Z Samples • Range 0 : FFFFFFFFFFFFFFFFxxxxxxxx +/- 25000 nT range • Range 3 : xxxFFFFFFFFFFFFFFFFxxxxx +/- 3125 nT range • Range 8 : xxxxxxxxFFFFFFFFFFFFFFFF +/- 97 nT range • OVER RANGE IMPACTS • APID 460/461: • A saturated waveform in the spin plane is relatively recoverable • A saturated signal in the spin-axis is deadly. No way to tell where it really is. • SPIN FITS: • Not recoverable. We lose virtually everything if the signal goes over range. • ON-ORBIT MAG RANGE ADJUSTMENT (ATS) • BELOW 6 Re : Use Range 0 (+/- 25000 nT) • OUTSIDE 6 Re : Use Range 4 (+/- 1563 nT)

  16. SCM TM • SCM Calibrations • Trend Sensor Health each orbit • Calibration Mode for 1 Minute • Slow Survey • APID 440 Filter Bank at ¼ Hz • Fast Survey • APID 440 Filter Bank at 4 Hz • APID 444 16 bit samples at 8 Samples/Second Particle Burst • APID 448 16 bit samples at 128 Samples/Second • APID 44D 2 channels 32 freq spectra at 1 spectra/sec Wave Burst • APID 44C 16 bit samples at 8192 Samples/Second • APID 44E 2 channels 64 freq spectra at 8 spectra/sec

  17. EFI TM Slow Survey • APID 410 X-Y Sine Wave Least Squares Spin Fits & Z-axis Average • APID 440 Filter Bank at ¼ Hz • Fast Survey • APID 440 Filter Bank at 4 Hz • APID 441 V1-V6 16-bit samples at 4 Samples/Second • APID 443 Ex-z 16-bit samples at 8 Samples/Second Particle Burst • APID 445 V1-V6 16-bit samples at 16 Samples/Second • APID 447 Ex-z 16-bit samples at 128 Samples/Second • APID 44D 2 channels 32 freq spectra at 1 spectra/sec Wave Burst • APID 449 V1-V6 16-bit samples at 8192 Samples/Second • APID 44B Ex-z 16-bit samples at 8192 Samples/Second • APID 44E 2 channels 64 freq spectra at 8 spectra/sec

  18. ECLIPSE REM =========================================================== REM ECLIPSE_ENTRY.CMD REM 5/30/06 REM =========================================================== /IDPURAWHEX 14F8 ;EFI -- ECLIPSE, LOW DENSITY CONFIGURATION /IEFICONF F8 ; /IDPUADRH XX ;ETC -- SET DIRECTORY FOR ETC ECLIPSE /IDPUADRL XX ; /IDPULOAD YY ; /IDPULOAD YY ; /IDPURAWHEX 6600 ;ETC -- ECLIPSE MODE REM =========================================================== REM ECLIPSE_EXIT.CMD REM 5/30/06 REM =========================================================== /IDPURAWHEX 14F6 ;EFI -- SUN, LOW DENSITY CONFIGURATION /IEFICONF F6 ; /IDPUADRH XX ;ETC -- SET DIRECTORY FOR ETC MAG /IDPUADRL XX ; /IDPULOAD YY ; /IDPULOAD YY ; /IDPURAWHEX 6600 ;ETC -- MAGNETOSPHERE MODE

  19. SOLAR WIND REM =========================================================== REM SOLAR_WIND_ENTRY.CMD REM 5/30/06 REM =========================================================== /IDPURAWHEX 14F5 ;EFI -- SUN, HIGH DENSITY CONFIGURATION /IEFICONF F5 ; /IDPUADRH XX ;ETC -- SET DIRECTORY FOR ETC SW /IDPUADRL XX ; /IDPULOAD YY ; /IDPULOAD YY ; /IDPURAWHEX 6600 ;ETC -- SOLAR WIND MODE REM =========================================================== REM SOLAR_WIND_EXIT.CMD REM 5/30/06 REM =========================================================== /IDPURAWHEX 14F6 ;EFI -- SUN, LOW DENSITY CONFIGURATION /IEFICONF F6 ; /IDPUADRH XX ;ETC -- SET DIRECTORY FOR ETC MAG /IDPUADRL XX ; /IDPULOAD YY ; /IDPULOAD YY ; /IDPURAWHEX 6600 ;ETC -- MAGNETOSPHERE MODE

  20. RADIATION BELT REM =========================================================== REM RAD_BELT_ENTRY.CMD REM 5/30/06 REM =========================================================== REM SST WOULD LIKE TO BE ATTENUATED REM =========================================================== REM RAD_BELT_EXIT.CMD REM 5/30/06 REM =========================================================== REM SST WOULD LIKE TO BE AUTOMATIC

  21. P3 SIM RESULTS Simulated Pass is too short to remove 375 Mb at GSE Rate 5

  22. P3 SIM RESULTS

  23. ISSUES • P3 SIMULATION RESULTS and ISSUES • Too Much RAW Data Being Generated • 453 (MOMENTS) occurring every spin • CANNOT Cut Down the Rate • 4-byte Data Instead of 2-bytes, 212 Bytes Every Spin • FSW Compressor/Decimator Needed • 451 (TRIGGER) occurring every second • Reformatting to remove filter data (will cut to ¼ volume) in V4.01 • Remove 451 during Slow Survey • Need a budget. What’s a reasonable amount to save and replay? • 452 (SST Engineering) • Not accounted in the total data budget (Vassilis’) • Not a whole lot of data, can be cut another factor of 4 or eliminated. • Compression Works Well (>2.5 ratio) • GSE Does Not Handle Telemetry Fast Enough in 30 minutes to remove 375 Mbits • Extend Pass in order to get this done • Need Shadow Entry and Exit Scripts • Need Solar Wind Entry and Exit Scripts • New EEPROM Loads Required to Make EFI, SST and ESA Work in Solar Wind • FSW Able to Load from Multiple EEPROM Directories (have not yet tried this!)

  24. PLAN • PLAN • SST/ESA MOMENTS • Decimation Specification – Completed and Approved • FSW Developed and Test – Completed • GSE Software Modification – Jim Lewis • Splitter Software Modification – Jim Lewis • SST/ESA REFORMATTING (ETC Version 5) • New FSW Support to Start New Directories – • SST/ESA ReTest – Cannot be Done on ETU

More Related