Multiple Effect Evaporator

1. Multiple Effect Evaporator Multiple Effect Evaporator is an industrial setup which ensures that there is no discharge of waste water in the environment technology includes pre-treatment and evaporation of the industrial waste until the waste forms solid crystals. These crystals are then removed and dehydrated. However, water Vapour from evaporation is condensed and returned to the process. plant produce solid dehydrated waste which is also called as crystal wastes in the industrial terms. Sludge dryer Multiple Effect Evaporator is an environment friendly technology which is highly recommended for industrial and other mechanical utilities as it saves a lot of their money. Also, no discharge, no effluent, means that it is contributing hugely to the socio-ecological aspect of the society. Also, if there are any severe water scarcity issues in the areas where your company is situated then Multiple Effect Evaporator is a must. For your information, Tamil Nadu Government has made the Multiple Effect Evaporator a compulsory thing to have for all industries in the state. No industry there can now run without having installed. No surprise that the industries there in Tamil Nadu have agreed that they are benefiting out of the Multiple Effect Evaporator actually. As a lot of waste gets recycled and hence the need of material is now comparatively lesser for operating the same procedure. Technoforce offers Multiple Effect Evaporator which is highly cost-cutting, environment friendly in nature. It is a system consisting of a stripper column for removal of organic volatiles from the feed stream. It does so because subsequently when the water gets evaporated, it should have less organics left as residue. System also consist Multiple Effect Evaporator (MEE) with a thermo-compressor for achieving energy economy, and a downstream for removing the balance water, converting the solids

2. into a dry powder which is cheaper and easier to dispose. The well-designed system saves operating and disposal costs and minimizes scaling in the evaporators. The organic solvents can entirely come into the distillate and increase BOD load on the ETP plant. The cost of disposal is generally on higher side due to the fact that the precipitated salts carries a lot of water even after separation. The higher energy costs can only be tolerated If the capacity is small. However, If the capacity is large then Batch Kettle should be avoided. Features: 50% less power required. 70% less energy required. 200% improvement in descaling cycle. Multiple Effect Evaporators and thermos-compressor reduce steam consumption. Minimum power requirement due to the use of axial flow pumps. Stripper isolates volatile organics to reduce COD (Cost of Disposal). Sludge dryer converts TDS to dry powder. Modular skid mounted systems reduce the site activity to a few weeks. Call Now Toll free:- +91(0) 02532383668 Visit us: - http://www.technoforce.net/technology/sludge-dryer/