1 / 3

Thermal Imaging based Search Operation using Drone

In current scenario, if any person is trapped under the damaged building then the only way to identify its position is to search in the pile of concrete. This process is time consuming and chances of finding the body in short period of time are less. So to reduce the risk of life, we can use thermal sensors which can detect the position of the body with the help of energy wave radiated by it. In this paper, we will be able to detect the location of trapped body easily and risk of losing life will reduce. Naveen Kumar | Shivam Tyagi | Vaibhav Prajapati | Saurabh Kumar "Thermal Imaging based Search Operation using Drone" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-4 , June 2018, URL: https://www.ijtsrd.com/papers/ijtsrd14192.pdf Paper URL: http://www.ijtsrd.com/engineering/mechanical-engineering/14192/thermal-imaging-based-search-operation-using-drone/naveen-kumar<br>

Download Presentation

Thermal Imaging based Search Operation using Drone

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. International Research Research and Development (IJTSRD) International Open Access Journal maging based Search Operation using International Journal of Trend in Scientific Scientific (IJTSRD) International Open Access Journal ISSN No: 2456 ISSN No: 2456 - 6470 | www.ijtsrd.com | Volume www.ijtsrd.com | Volume - 2 | Issue – 4 Thermal Imaging based Naveen Kumar1, Shivam peration using Drone Shivam Tyagi2, Vaibhav Prajapati2, Saurabh 1Assistant Professor Saurabh Kumar2 1,2Department of Mechanical Engineering, ABES Engineering College, Department of Mechanical Engineering, ABES Engineering College, Ghaziabad, Uttar Pradesh, India Ghaziabad, Uttar Pradesh, India ABSTRACT In current scenario, if any person is trapped under the damaged building then the only way to identify its position is to search in the pile of concrete. This process is time consuming and chances of finding the body in short period of time are less. So to risk of life, we can use thermal sensors which can detect the position of the body with the help of energy wave radiated by it. In this paper, we will be able to detect the location of trapped body easily and risk of losing life will reduce. subjects that won't not be open. When drone is flying over the searching area, it will show thermal images[6,7] of that area on the screen which will make detection easy and less time consuming. make detection easy and less time consuming. In current scenario, if any person is trapped under the damaged building then the only way to identify its position is to search in the pile of concrete. This process is time consuming and chances of finding the body in short period of time are less. So to reduce the risk of life, we can use thermal sensors which can detect the position of the body with the help of energy wave radiated by it. In this paper, we will be able to detect the location of trapped body easily and risk of subjects that won't not be open. When drone is flying searching area, it will show thermal images[6,7] of that area on the screen which will Keywords: sensor, drone, human body thermal waves, surveillance sor, drone, human body thermal waves, Introduction: In any disaster if any building falls in which number of lives are stucked, then firstly it will be difficult to count the number of lives trapped under the building with their exact position. Presently the way to face this is to search the body in the pile of building concrete which is a time taking process and risk of losing many lives is very high. Sometimes, we feel helpless to save the lives due to lack of time available for the rescue. In this duration of time, it may be possible to save many lives if they can be detected without consuming any time. In any disaster if any building falls in which number of lives are stucked, then firstly it will be difficult to count the number of lives trapped under the building only available way to face this is to search the body in the pile of building concrete which is a time taking process and risk of losing many lives is very high. Sometimes, we feel helpless to save the lives due to lack of time n this duration of time, it may be possible to save many lives if they can be Figure1: thermal image from drone view Figure1: thermal image from drone view Methodology: Figure 2 gives a mission flowchart. Once a wild SAR mission is asked for to the Ground Control System (GCS), the GCS administrator outlines a flight way s the hunt zone and sends the automaton into the air to direct the mission. Amid the flight, the load up picture preparing framework is intended to distinguish targets. These constant pictures and summed up GPS enable the quick safeguard to luding guiding the casualty to sit tight for save at the momentum area and conveying crisis pharmaceutical, nourishment and water. Figure 2 gives a mission flowchart. Once a wild SAR mission is asked for to the Ground Control System (GCS), the GCS administrator outlines a flight way that covers the hunt zone and sends the automaton into the air to direct the mission. Amid the flight, the on-load up picture preparing framework is intended to distinguish targets. These constant pictures and summed up GPS enable the quick safeguard to activity including guiding the casualty to sit tight for save at the momentum area and conveying crisis pharmaceutical, nourishment and water. In this paper, we will discuss about how to detect the human body with the help of thermal camera’s installed in drone so that we can detect the body easily without wasting much time in search operation [1,2,3,4]. Drone reconnaissance clandestinely assembling data about an objective as caught from a separation or height. Drone’s flight capacities, little size and capacity to withstand brutal conditions mean they can frequently overview conditions mean they can frequently overview In this paper, we will discuss about how to detect the human body with the help of thermal camera’s installed in drone so that we can detect the body easily without wasting much time in search operation [1,2,3,4]. Drone reconnaissance y assembling data about an objective as caught from a separation or height. Drone’s flight capacities, little size and capacity to withstand brutal empowers empowers @ IJTSRD | Available Online @ www.ijtsrd.com @ IJTSRD | Available Online @ www.ijtsrd.com | Volume – 2 | Issue – 4 | May-Jun Jun 2018 Page: 928

  2. International Journal of Trend in Scientific Research and Development (IJTSRD) ISSN: 2456-6470 2. Gimbal: The automaton gimbal is the turning mount, which pivots about the x, y, and z tomahawks to give adjustment and pointing of cameras or different sensors. Figure 4: Gimbal 3. Gimbal motor: Figure 2: Methodology Brushless DC engines can be utilized for coordinate drive precise situating, which require exceptionally twisted loops and devoted control hardware which have just as of late turned out to be financially accessible. Components required: 1. Drone (quadcopter): A quadcopter is a multirotor helicopter that is lifted and impelled by four rotors. Quadcopters are named rotorcraft, rather than settled wing air ship, in light of the fact that their lift is produced by an arrangement of rotors. Quadcopters by and large utilize two sets of indistinguishable settled pitched propellers; two clockwise (CW) and two counterclockwise (CCW). These utilization autonomous variety of the speed of every rotor to accomplish control. By changing the speed of every rotor it is conceivable to explicitly produce a coveted aggregate push; to situate for the focal point of push both along the side and longitudinally; and to make a coveted aggregate torque, or turning power. 4. Gimbal controller unit: Permits control of direct-drive brushless gimbal engines as though they were standard servo engines. 5. Sensor: Sensor is mounted below the drone so that thermal image of site can be captured. Conclusion: In this paper, we are proposing the method to reduce the wastage of time in search operation with the help of drone mounted with thermal sensors. Thermal images received from drone will be used to identify the target body without wasting time so that rescue team can be deployed as soon as possible. References: 1)Goodrich M.A., Morse B.S., Gerhardt D., Cooper J.L., Quigley M., Adams J.A., Humphrey C. Supporting wilderness search and rescue using a camera-equipped mini uav. J. Field Robot. 2008;25:89–110. doi: 10.1002/rob.20226. Figure 3: Drone @ IJTSRD | Available Online @ www.ijtsrd.com | Volume – 2 | Issue – 4 | May-Jun 2018 Page: 929

  3. International Journal of Trend in Scientific Research and Development (IJTSRD) ISSN: 2456-6470 2)Goodrich M.A., Cooper J.L., Adams J.A., Humphrey C., Zeeman R., Buss B.G. Using a mini-uav to support wilderness search and rescue: Practices for human-robot teaming; Proceedings of the 2007 IEEE International Workshop on Safety, Security and Rescue Robotics; Rome, Italy. 27–29 September 2007. Prague, Czech Republic. 11–14 May 2004; Berlin/Heidelberg, Germany: Springer; pp. 69–82. 6)Rudol P., Doherty P. Human body detection and geolocalization for uav search and rescue missions using color and thermal imagery; Proceedings of the 2008 IEEE Aerospace Conference; Montana, MT, USA. 1–8 March 2008. 3)Goodrich M.A., Morse B.S., Engh C., Cooper J.L., Adams J.A. Towards using unmanned aerial vehicles (UAVs) in wilderness search and rescue: Lessons from field trials. 2009;10:453–478. Naveen Kumar graduated in Mechanical Engineering and earned his Masters degree in Production and Engineering. In present time, he is working as Assistant Professor in Engineering Department at Interact. Stud. Industrial 4)Habib M.K., Baudoin Y. Robot-assisted risky intervention, search, rescue and environmental surveillance. Int. J. Adv. Robot. Syst. 2010;7:1–8. Mechanical 5)Mikolajczyk K., Schmid C., Zisserman A. Human detection based on a probabilistic assembly of robust part detectors; European Conference on Computer Vision, Proceedings of the 8th European Conference on Computer Vision; ABES Engineering College, Ghaziabad, India. He has almost seven years of teaching experience and has published two research papers in international journals. @ IJTSRD | Available Online @ www.ijtsrd.com | Volume – 2 | Issue – 4 | May-Jun 2018 Page: 930

More Related