1 / 18

NDNR Modeling Group Meeting January 25, 2007

NDNR Modeling Group Meeting January 25, 2007. Welcome to the Nebraska Department of Natural Resources Modeling Group meeting. Doug Hallum will describe a USGS study to assess canal seepage variability with various geophysical methods. Resistivity: Concept.

tatum-sellers
Download Presentation

NDNR Modeling Group Meeting January 25, 2007

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. NDNR Modeling Group MeetingJanuary 25, 2007 Welcome to the Nebraska Department of Natural Resources Modeling Group meeting. Doug Hallum will describe a USGS study to assess canal seepage variability with various geophysical methods.

  2. Resistivity: Concept • Inject a known current into the ground C1 & C2 (transmitter) • Measure resulting potential or voltage difference P1 & P2 (receiver) • Apparent resistivity is calculated using the geometric factor

  3. Elkhorn Loup Model (ELM) – Canal Geophysical Techniques • Direct-Current Resistivity • Staked Survey • Land-Streamer • Capacitively-Coupled Resistivity • OhmMapper • Time-Domain ElectroMagnetic Induction • TerraTEM (TDEM)

  4. Resistivity Arrays • Arrays used in the ELM study: • Dipole dipole • Wenner -Schlumberger Figure from: http://www.cflhd.gov/agm/engApplications/RoadwaySubsidence/513ResistivityMethods.htm

  5. DC Resistivity • Staked Survey • Provides highly repeatable “base” dataset • High signal to noise ratio • Time and labor intensive Electrodes Electrode + Multiconductor cable Resistivity meter

  6. DC Resistivity • Land-Streamer • Based on the staked survey methodology • Collects data in motion • Ground contact a potential problem Electrodes

  7. D-C Resistivity – Staked Survey Preliminary Results Dipole-Dipole Survey

  8. Capacitively Coupled Resistivity • Uses antenna dragged along the ground • Induces a current through capacitance • Uses a dipole - dipole array • Collects data in motion • Often used in concert with GPR Slides modified from: http://www.geometrics.com/OhmMapper/ohmmap.html

  9. Capacitively-Coupled Resistivity • Ohmmapper • Rapid continuous data collection • Direct formation contact unnecessary • Less time and labor than staked survey • Array spacing determines depth of investigation • Can have trouble with high resistivities From: Lunar and Planetary Science XXXVII (2006) 1410.pdf

  10. Capacitively-Coupled Resistivity Preliminary Results

  11. Time Domain ElectroMagnetic Induction • Uses a Tx loop to generate an electromagnetic field • Generates measurable responses (eddy currents) • Currents decay and are measured by the Rx loop • Great depths can be studied by increasing transmittance time • Continuous data collection • High conductance decreases depth of study transmitter loop (Tx) receiver loop (Rx) induced eddy currents at progressively later turnoff times Figure from: http://www.ncwater.org/Education_and_ Technical_Assistance/Ground_Water/TDEM/

  12. TDEM – Tx and Rx Waveforms • Waveform of the transmitted signal is a train of pulses • Step-functions, ramps, or other waveforms and measurements are made in the off-times between pulses, usually after the primary has stopped charging (Sheriff, 2002)

  13. Time-Domain ElectroMagnetics • TDEM • Rapid data collection • Direct formation contact unnecessary • Less time and labor than staked survey • Short arrays achieve deeper depths • Post processing currently limited www.spectrum-geophysics.com www.gpx.com.au www.fhwa.dot.gov

  14. Time-Domain ElectroMagnetics Preliminary Results 01/11/2007

  15. Summary of Preliminary Results • All techniques produced similar results. (2 layers) • DC staked surveys yielded low noise, high qualitydatasets, Land-Streamer did not produce usable data. • OhmMapper produced somewhat noisy data. • The OhmMapper can only log 5 receivers at a time. • Multiple passes necessary to obtain near surface and deeper data. • Requires long arrays to achieve maximum depth of interest. • Longer offsets (increased depth of interest) produced noisy data. • TDEM produced comparable results • Data processing is somewhat difficult at this point. • Evaluating new software which will reduce data processing time. • Engineer from Australia modified the TerraTEM for continuous data acquisition and filtering.

  16. Conclusions • Post-processing is not complete. • Preliminary results are available for some transects. • Location of data and correlation between methods is not currently available. • Geoprobe data is not currently available. • Documentation will be in peer review by fall, 2007.

  17. Whats next? • Further analysis of TDEM data processing software. • Make comparisons to lithologic data. • Build more robust sled to eliminate mechanical problems. 01/11/2007

  18. Questions: James C. Cannia P.G. Hydrologistjcannia@usgs.govU.S. Geological SurveyUSGS Nebraska Water Science Center5231 South 19th St.Lincoln, NE 68512-1271 Office 402-328-4128 Cell 402-416-5321 Fax 402-328-4101

More Related