1 / 27

RLC CCTs To Simulate Damping

RLC CCTs To Simulate Damping. Φ :I of branch or V across the CCT Ψ :V across a comp. or I in CCT. Typical Differential Eq. of RLC. The Parallel RLC Eq(1): The Series RLC Eq(2):. Load Switching. Switch on & off loads : most Freq. RL, Low P.F. when Inductive

tareq
Download Presentation

RLC CCTs To Simulate Damping

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. RLC CCTs To Simulate Damping • Φ:I of branch or V across the CCT • Ψ:V across a comp. or I in CCT

  2. Typical Differential Eq. of RLC • The Parallel RLC Eq(1): • The Series RLC Eq(2):

  3. Load Switching Switch on & off loads : most Freq. RL, Low P.F. when Inductive High P.F. when Resistive C_loadbus :role in After sw. off. Transient V0 : Vs (at instant I ceases) C charged to V0, disch., In RL, Damp Os. Dis. A damped cosine wave of Fig. 4.6 As P.F. improve, Transient decrease

  4. The RL Load and Switching off

  5. Arc Furnace Example • Low voltage & High Curent • Fed by step down furn. Transformer • Low P.F. & freq. switching • Cap.s connected to HV bus impr. P.F. Delta & Wye Connections • Example:Wye connection,Transf.60Hz 13.8 KV,20 MVA Y/Y solid Gr • P.F. at Full Load;0.6,C corr. P.F.to 1.0 • Transient?, sw.off fully loaded Transf.

  6. Eq. CCTs & Discussion • Schematic & Eq. • Iload=20000/(13.8√3)=836.7 A (rms) • Z=13.8/(√3x836) =9.522 Ω • φ=cos−0.6=53. • RT+RL=9.52cosφ=5.7 • XT+XL=9.52sinφ=7.6 • L=20.2 mH

  7. Discussion Furn. Ex. continued • open:Is(0)=0, required:Ic(0)=-I(0) • Ic=-I=836.7sinΦ=669.4A (rms) Ic is at peak since Vc=0, and Ic(t=0)=669.4√2=946.67A (text result should be corrected) • Vc(0)=0 • Xc=13.8/(√3x669.4)=11.9Ω (please correct text book results) • C=222.6 μF

  8. Discussion of Transient Resp. • for I, the current: dI/dt+1/Ts dI/dt+1/T=0 i(s)(s+s/Ts+1/T)=(s+1/Ts)I(0)+I’(0) • Transient of series RLC CCT: L dI/dt+IR=Vc LI’(0)+I(0)R=Vc(0)=0 I’(0)=-I(0)R/L=-I(0)/Ts • i(s)=s/(s+s/Ts+1/T) . I(0)-Fig4.6

  9. Discussion Continued • Z0=√L/C=√20.2/0.2228=9.52 Ω • λ=Z0/R=9.52/5.713=1.6664 • I, starts with –946.67 A, swing to +ve peak of 0.105 half cycle later. & -.06X946.67 after another half cycle (these values should be corrected in the text book) • For Vc: dVc/dt+1/Ts dVc/dt +Vc/T=0 • vc(s)(s+s/Ts+1/T)=(s+1/Ts)Vc(0)+V’c(0) • Vc(0)=0, V’c(0)=-I(0)/c • vc(s)=1/(s+s/Ts+1/T) . I(0)/c

  10. Transformer Terminal Voltage • Fig 4.4 λ=1.66 peak reaches 65% • undamped:[-I(0)/C]T=-I(0)Z0 • The first voltage peak: 0.65x946.67x9.52=5.85 KV (please correct the value in the text book) • The time scale is T=√LC= 2.121 ms • Reaches peak in 1.4T=2.97 ms • Fast Transient and Corona Damping • Always higher freq. Damped quicker

  11. Abnoraml Switching • Normal : 2 pu • Abnormal : mag. Far beyond this 1-current suppression 2- Capacitor Bank switching off 3-Other Restriking Phenomena 4-Transformer Mangnetizing Inrush 5-Ferroresonance

  12. Current Suppression • N.,I ceases, arc current, periodic Zero • Abn., arc suppression force current 0 Current Chopping • trapped mag. Energy  Abn. Voltage • Ex: sw. off Transformer magnetizing current • Energy stored:½LmI0 • Lm very large

  13. Cur. Chop. • ½ CV=1/2 LmI0 V=I0 √Lm/C • I0: Instant. current chopped • i.e. 1000KVA, 13.8 KV Transformer 1- magnetizing current=1.5 A (rms) 2-Lm=V/ωIm=13800/(√3x377x1.5)=14 H • eff.Cap.type of wind.&ins(1000-7000PF) • If C=5000 PF, Z0=√[14/5x10^-9]=52915Ω • If C.B. chops I_peak, can be 2.5 A, V(peak)≈132KV Abnormal for 13.8 KV

  14. Cur. Chop. Discussion • Not So High: 1- damping, 2- fraction of Energy release • shaded area< 30% stored energy • I0√(0.3Lm/C)= 55% V (transient) • Dis. Transf. most vulnerable

  15. Continued… • Air cored reactors (core of significant air-gap) 1-All energy recoverable 2-If as shunt compensator, protected by L.A. • Formal Evaluation of RLC CCT 1- IC+IR+IL=0, sub. & Diff. 2- dV/dt+1/RCdV/dt+V/LmC=0 3-v(s)(s+s/RC+1/LmC)=(s+1/RC)V(0)+V’0 • V’(0)=-Ic(0)/c=-I0/C • V(s)=sV(0)/(s+s/RC+1/Lmc)+V(0)/Rc x 1/(s+s/RC+1/Lmc) –I0/[c(s+s/RC+1/LmC)] • Transforms of Fig4.4 & Fig 4.6 • first two normal Transient terms without chop

  16. … continued • Chopping of Magnetizing current of a 13.8 kV

  17. The response with cur. Chop. • 1st term Fig4.6, pu=V(0) • 2nd term fig4.4,pu=TVc(0)/Tp = Vc(0)/η • ζ− I0/{c[s+s/Tp+1/T]}=TI0/C 2η/(√4η-1) . exp(-t’/2η) sin[√(4η-1) t’/2η] □ TI0/C=Z0I0 peak Amp. Chopping Term (exclude damp.)

  18. The response with cur. Chop. Practical Ex: Shown in Figure  1-chop only 0.5-0.6 A (I – to zero) TRV 20KV 2- chop occur instantaneously 3- in practice I declines on a measurable time 4-TRV and time-to-chop/period H.F. Osc. : Figure  5-TRV max if tc=0, TRV reduce as tc>T/4

  19. Discussion on CB performance • small contact sep. dielectric fails • Successive attempts raise Higher Voltages until isolation • TRV of Cur.Chop. Limited by reignitions (Fig) • G. Practice: a cable between C.B. and Transformer drastic reduction in TRV • 100 ft of 15 KV cable (100PF/ft) Transformer(3000PF eff. Cap.) TRV halved • Motors No risk: Noload inductance very small compare to transformer

  20. Semiconductor DevicesCurrent Suppression • Gen. OVs to destroy them • end half cycle of diode conduction 1-carriers remained at junction region allow current to flow & reverses 2- then sweeps the carriers & returns device to Block state:I collapses fast • inductive CCT Eng. Transf. to C,large V

  21. Current Suppresssion Silicon Diode • CCT and Current • H.F. Osc. L&C • Protection : 1-snubber cap. In P. 2-additional series R

  22. Capacitance Switching Off • Disconnect: C /unload Transmission lines • Concerns: reignite/restrike in opening • Chance low, Cap. Sw. frequent • Cap fully charged • Half Cycle VCB=2 Vp

  23. Capacitance Switching off

  24. Discussion Cap. Sw. Off • In fact Vc>Vsys Ferranti Rise • Vsource_side decrease to Vsys • There is a ∆V change (however,exist in weak systems) • Discon. a C.B. in lower side of step down Transformer supplying an unloaded cable • Current in Cap. Sw. is freq. small and it is possible to disconnect it In first zero -- with small contact sep., 2 V appear across contacts --- increased possibility of restrike (small separation) • Oscillating to new voltage with f0=1/2Π√LC • I(restrike)=2Vp/√L/C sinω0t • Transient peak of 3 Vp

  25. Capacitance Switching with a Restrike at Peak of Voltage

  26. Capacitor Switching …continued • A 13.8 KV, 5000KVAR, 3ph bank,NGr • Source Gr, inductance:1 mH • Restrike at Vp: 1- c=5/(377x13.8)=69.64μF 2- Z=√1000/69.64=3.789Ω 3-Ip=2√2x13.8/(√3x3.789)=5.947 KA 4-f0=603 Hz

  27. Multiple Restrikes During Capacitance Switching

More Related