1 / 10

Vitaliy Statsenko Scientific supervisor DSc . Leonid Bondarenko

ANALITICALY FINDING OF COEFFICIENT OF FRICTION FOR FLANGES ( АНАЛІТИЧНЕ ЗНАХОДЖЕННЯ КОЕФІЦІЕНТУ ТЕРТЯ РЕБОРД ). Vitaliy Statsenko Scientific supervisor DSc . Leonid Bondarenko.

tarak
Download Presentation

Vitaliy Statsenko Scientific supervisor DSc . Leonid Bondarenko

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. ANALITICALY FINDING OF COEFFICIENT OF FRICTION FOR FLANGES(АНАЛІТИЧНЕ ЗНАХОДЖЕННЯ КОЕФІЦІЕНТУ ТЕРТЯ РЕБОРД) VitaliyStatsenkoScientific supervisor DSc. Leonid Bondarenko

  2. Known [1] that the resistance movement of the mechanism of movement of friction on a straight line segment path defined by the formula: Wtr = G + Gk ∙ μd +2 fD ∙ Kpwhere G and Gk - the weight of cargo by weight and the crane or trolley; D and d - diameter of the wheel and his neck; f - coefficient of rolling friction; Kp - coefficient which takes into account the friction wheel hubs and rebords; μ - coefficient of friction bearings , brought to the pin wheel.

  3. Figure 1. Dependence of deviation angle ψ longitudinal axis of the wheel from the axis of the rails 1-adjusted coefficient of rolling friction KK3a axis and;2 - the same respect in KK3b 3 - the total value of rolling friction coefficient is given KPC, which falls on the sliding friction rim surface of the rails; 3’, 3” - normative coefficient of friction bearings for the flat and rounded surface.

  4. (І)where ψ - angle from the axis of the rails; V = ωR = πnR - Circular speed wheel rim; n - rotational speed; R - radius of the wheel.(4)Efforts PKB which falls on the lines of bK that glides(5)Power of friction (6)where η - coefficient of friction between wheel and rail.

  5. Find the power of conventional friction coefficient of sliding friction KK3b. (7). After similar calculations for the axis a, perpendicular to the axis of b implies an(8) (9) (10)The formula for determining the coefficient of friction bearings, which accounted for sliding along an axis that coincides with the transverse axis of the rails (11)The total coefficient of friction bearings, which accounted for as a result of twisting the wheel slip at an angle ψ(12)

  6. Experimental value of the resistance movement of friction at Kp = 1 and the current value of Kr, (13) But given the value of coefficient of friction bearings (14) Size a and b in the case of equal values of elastic moduland Poisson's ratio node wheels and rails are determined by the expressions [3] (15)

  7. Fig.2. Dependence of deviation angle ψ longitudinal axis of the wheel axis rails 1 - total experimental values of resistance movement WTP, which includes the friction surface sliding on rails, 2 - component, which accounted for only friction of flange; WEP; 1̕, 2̕ - size, similar 1 and 2 with linear contact; 4,5 - power that is on a sliding WK3 at contact lines and point ; 4’, 5’ - same with linear contact

  8. We find values of resistance movement from the friction of the normative method WTPthat component, which falls on the sliding friction wheels on rails WK3 surface due to a distortion angle. Calculations of conduct for wheel diameter = 250 mm unit with a static load P = 40 kN of linear and point contacts for crane trolley connected by flexible cable (Kp = 2) and d = 50mm; f = 0,4, f = 0, 3 - rounded and flat (B = 45 mm) head rails, if η = 0,1; μ = 0,15.

  9. 1. Factor that takes into account the friction of wheels on rail rebord consists of two main components: direct and friction rebordy component of sliding friction wheel rim on the back rails due to mismatch longitudinal axis with the axis of the wheel rails. 2. A component of sliding friction on the rim rail depends on the angle discrepancy axis rails and wheels and such at ψ = 3 ° is about 12% of the total value of point contacts - about 10% linear

  10. Thank you for your attention.

More Related