1 / 10

SEGBOARD

By: Serge Renaud Skander Souissi Olivier Fauteux-Brault. SEGBOARD. Objectives. Build a one wheel skateboard that balances itself. Forward and reverse capabilities. Control the speed and the direction of the skateboard by shifting your weight forward or backward

tala
Download Presentation

SEGBOARD

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. By: Serge Renaud Skander Souissi Olivier Fauteux-Brault SEGBOARD

  2. Objectives • Build a one wheel skateboard that balances itself. • Forward and reverse capabilities. • Control the speed and the direction of the skateboard by shifting your weight forward or backward • Learn more about various electrical components • Programming of microcontroller

  3. Steps • Design the skateboard and identify the needs, both electrical and mechanical. • Understand how the OSMC motor controller works. • Understanding how the Arduino works. • Programming: how to acquires different inputs from sensor, how to treat the inputs to get the desirable outputs. • Building the board itself • Testing and calibration

  4. Accomplishments (so far) • Identified needed components to acheive our goal. • Understanding the functionnality of the Open Source Motor Controller and microcontroller. • Programming the arduino board. • Make the motor reacts with the change of angles given by the accelerometer. • Implementing safety measures.

  5. Electrical components

  6. Electrical components • OSMC : control the motor power and direction • Arduino: control the OSCM and motor speed • Gyroscope: convert physical signal to analog • Motor: 24V,ungeared DC motor, 4000rpmapprox .70 horsepower (MAX)

  7. Mechanical Components

  8. Mechanical Components (list) • Go kart wheel • Bearings • Sprockets • Chain • Hubs • Axel • Sheet metal (frame) • Angle irons

  9. Programming • Motor turns as a function of the change in angle • Board doesn’t start until leveled • If the angle is too great the board cuts off and needs to be leveled again to regain its functionality • If the occupant falls off, the board will stop once leveled

  10. Improvements • Occupancy sensors that act like an on/off switch. • Lighter versions to maximize efficiency. • Knob to set the sensitivity. • Knob leveling control (be able go uphill / downhill ).

More Related