1 / 27

ELECTRIC CIRCUIT ANALYSIS - I

ELECTRIC CIRCUIT ANALYSIS - I. Chapter 13 – Sinusoidal Alternating Waveforms Lecture 13 by Moeen Ghiyas. TODAY’S lesson. CHAPTER 13 – Sinusoidal Alternating Waveforms. TODAY’S LESSON CONTENTS. General Format for the Sinusoidal Voltage or Current Phase Relation Phase Measurement.

smassey
Download Presentation

ELECTRIC CIRCUIT ANALYSIS - I

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. ELECTRIC CIRCUIT ANALYSIS - I Chapter 13 – Sinusoidal Alternating Waveforms Lecture 13 by MoeenGhiyas

  2. TODAY’S lesson CHAPTER 13 – Sinusoidal Alternating Waveforms

  3. TODAY’S LESSON CONTENTS • General Format for the Sinusoidal Voltage or Current • Phase Relation • Phase Measurement

  4. General Format for the Sinusoidal Voltage or Current • The basic mathematical format for the sinusoidal waveform to find its instantaneous value is Am sin α • where Am is the peak value of the waveform and α is the unit of measure for the horizontal axis • But we know that α = ωt • Thus general format of a sine wave can also be written as Amsin ωt • with ωtas the horizontal unit of measure

  5. General Format for the Sinusoidal Voltage or Current • Since the general format of a sine wave is Amsin ωt • Thus for electrical quantities such as current and voltage, the general format is • i = Imsin ωt = Imsin α • e = Emsin ωt = Emsin α • where the capital letters I and E with the subscript m represent the amplitude (peak value), and the lowercase letters i and e represent the instantaneous value of current or voltage, respectively, at any time t

  6. General Format for the Sinusoidal Voltage or Current • Since the general format of ac current and voltage is • i = Imsin α and e = Emsin α • The angle at which a particular voltage level is attained can be determined by • Thus angle for particular voltage is, • Similarly for current

  7. General Format for the Sinusoidal Voltage or Current • Example – Determine the angle at which the magnitude of the sinusoidal function v =10 sin 377t is 4 V. • Solution • We know that i = Imsin α and e = Emsin α • . Thus • . And for 2nd intersection

  8. General Format for the Sinusoidal Voltage or Current Any other direct method ? • Example – Determine the time at which the magnitude of the sinusoidal function v =10 sin 377t is 4 V. • Solution • We know that and or • And for 2nd intersection

  9. General Format for the Sinusoidal Voltage or Current • Example – Sketch e = 10 sin 314t with the abscissa • angle (α) in degrees. • angle (α) in radians. • time (t) in seconds. • Solution (a) – No need for calculations

  10. General Format for the Sinusoidal Voltage or Current • Example – Sketch e = 10 sin 314t with the abscissa • angle (α) in degrees. • angle (α) in radians. • time (t) in seconds. • Solution (b) – Again no need for calculations

  11. General Format for the Sinusoidal Voltage or Current • Example – Sketch e = 10 sin 314t with the abscissa • angle (α) in degrees. • angle (α) in radians. • time (t) in seconds. • Solution (c) – • (direct method) simply calculate time period (T) and then break this period into intervals and then show on wave-plot

  12. General Format for the Sinusoidal Voltage or Current • Example – Given i = 6 x10-3 sin 1000t, determine i at t = 2 ms. • Solution • Note – angle α may not be converted into degrees if using calculator in radian mode for calculating value of sine function.

  13. Phase Relation • The general format of a sine wave Amsin ωt The phase relationship between two waveforms indicates which one leads or lags, and by how many degrees or radians

  14. Phase Relation • The general format of a sine wave Amsin ωt • But if the waveform is shifted to the right or left of 0°, the expression becomes Amsin (ωt ±θ) • where θ is the angle in degrees or radians that the waveform has been shifted.

  15. Phase Relation • If the waveform passes through the horizontal axis with a positive going (increasing with time) slope before 0°, as shown in Fig, • the expression for instantaneous value is • In above eqn, if at wt = α = 0°, the magnitude is Amsin θ,

  16. Phase Relation • If the waveform passes through the horizontal axis with a positive going (increasing with time) slope after 0°, as shown in Fig, • the expression for instantaneous value is • In above eqn, if at wt = α = 0°, the magnitude is Amsin(-θ), which, by a trigonometric identity, becomes -Amsin θ;

  17. Phase Relation • If the waveform crosses the horizontal axis with a positive-going slope 90° (π/2) sooner, as shown in fig, it is called a cosine wave; that is,

  18. Phase Relation • The terms lead and lag are used to indicate the relationship between two sinusoidal waveforms of the same frequency plotted on the same set of axes. • In Fig, the cosine curve is said to lead the sine curve by 90°, and the sine curve is said to lag the cosine curve by 90°. • If both waveforms cross the axis at the same point with the same slope, they are in phase.

  19. Phase Relation • The general format of a shifted sine wave Amsin (ωt ± θ) • Geometric relationship • . Also

  20. Phase Relation • EXAMPLE - What is the phase relationship between the sinusoidal waveforms of each of the following sets?

  21. Phase Relation • EXAMPLE - What is the phase relationship between the sinusoidal waveforms of each of the following sets?

  22. Phase Relation • EXAMPLE - What is the phase relationship between the sinusoidal waveforms of each of the following sets?

  23. Phase Relation • EXAMPLE - What is the phase relationship between the sinusoidal waveforms of each of the following sets?

  24. Phase Relation • EXAMPLE - What is the phase relationship between the sinusoidal waveforms of each of the following sets?

  25. Phase Measurement Note that each sinusoidal function has the same frequency, permitting the use of either waveform to determine the period

  26. Summary / Conclusion • General Format for the Sinusoidal Voltage or Current • Phase Relation • Phase Measurement

More Related