1 / 24

ELECTRIC CIRCUIT ANALYSIS - I

Lecture 4 by Moeen Ghiyas Chapter 11 – Magnetic Circuits. ELECTRIC CIRCUIT ANALYSIS - I. TODAY’S LECTURE CONTENTS. Review Ohm’s Law For Magnetic Circuits Magnetizing Force Hysteresis Ampere’s Circuital Law – (Applying KVL) The Flux Φ – (Applying KCL) Series Magnetic Circuits.

perrin
Download Presentation

ELECTRIC CIRCUIT ANALYSIS - I

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Lecture 4 by MoeenGhiyas Chapter 11 – Magnetic Circuits ELECTRIC CIRCUIT ANALYSIS - I

  2. TODAY’S LECTURE CONTENTS • Review • Ohm’s Law For Magnetic Circuits • Magnetizing Force • Hysteresis • Ampere’s Circuital Law – (Applying KVL) • The Flux Φ – (Applying KCL) • Series Magnetic Circuits

  3. Ohm’s Law For Magnetic Circuits • Ohm’s law for magnetic circuit • Where the magnetomotive force Fis proportional to the product of the number of turns N around the core (in which the flux is to be established) and the current I through the turns of wire • Obviously, an increase in the number of turns N or the current I through the wire will result in an increased “pressure” on the system to establish flux lines through the core.

  4. Magnetizing Force • The magneto-motive force per unit length is called the magnetizing force (H). In equation form, • But from Ohm’s law for magnetic circuits, we know • Substituting above, we have

  5. Magnetizing Force • The applied magnetizing force has a pronounced effect on the resulting permeability of a magnetic material.

  6. Magnetizing Force • Also the flux density and the magnetizing force are related by the following equation: • This equation indicates that for a particular magnetizing force, the greater the permeability, the greater will be the induced flux density.

  7. Hysteresis

  8. Hysteresis

  9. Hysteresis

  10. Hysteresis

  11. Hysteresis

  12. Hysteresis

  13. Hysteresis • Domain Theory of Magnetism • The atom, due to its spinning electrons, has magnetic field associated. • In nonmagnetic materials, the net magnetic field is zero since the magnetic fields due to the atoms oppose each other. • In magnetic materials such as iron and steel, however, the magnetic fields of groups of atoms in the order of 1012 are aligned, forming very small bar magnets.

  14. Hysteresis • Domain Theory of Magnetism • This group of magnetically aligned atoms is called a domain. • Each domain is a separate entity; that is, each domain is independent of the surrounding domains. • For an un-magnetized sample of magnetic material, these domains appear in a random manner, such as shown in fig. • The net magnetic field in any one direction is zero.

  15. Ampere’s Circuital Law – KVL

  16. Ampere’s Circuital Law – (KVL)

  17. The Flux Φ – (KCL)

  18. Series Magnetic Circuits • Magnetic circuit problems are basically of two types: • In one type, Φ is given, and the impressed mmf NI must be computed (problem encountered in the design of motors, generators, and transformers). • In the other type, NI is given, and the flux Φ of magnetic circuit must be found (problem encountered primarily in the design of magnetic amplifiers and is more difficult since the approach is “hit or miss.” • For magnetic circuits, the level of B or H is determined from using the B-H curve.

  19. Series Magnetic Circuits • Ex ample – For the series magnetic circuit of fig: • Find the value of I required to develop a magnetic flux of Φ = 4 x 10-4Wb. • Determine μ and μr for the material under these conditions.

  20. Series Magnetic Circuits • Find the value of I required to develop a magnetic flux Φ = 4 x 10-4 Wb • Solution

  21. Series Magnetic Circuits • Find the value of I required to develop a magnetic flux Φ = 4 x 104Wb • Solution • Using B – H curves of fig, we can determine magnetizing force H: • . H = 170 At / m

  22. Series Magnetic Circuits • Determine μ and μr for the material under these conditions.

  23. Summary / Conclusion • Review • Ohm’s Law For Magnetic Circuits • Magnetizing Force • Hysteresis • Ampere’s Circuital Law – (Applying KVL) • The Flux Φ – (Applying KCL) • Series Magnetic Circuits

More Related