1 / 18

Chapter 2 The PIC 16F877 Microcontroller

Chapter 2 The PIC 16F877 Microcontroller. Features. 16F877 Features. PIC Oscillator. _ LP_OSC Oscillator Low frequency (32<F<200Khz) ; _XT_OSC Oscillator medium speed (200Khz<F<4Mhz) ; _HS_OSC Oscillator High speed (4Mhz<F<20Mhz) ; _RC_OSC Oscillator RC.

sheng
Download Presentation

Chapter 2 The PIC 16F877 Microcontroller

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Chapter 2 The PIC 16F877 Microcontroller

  2. Features

  3. 16F877 Features

  4. PIC Oscillator • _LP_OSC Oscillator Low frequency (32<F<200Khz) ; • _XT_OSC Oscillator medium speed (200Khz<F<4Mhz) ; • _HS_OSC Oscillator High speed (4Mhz<F<20Mhz) ; • _RC_OSC Oscillator RC

  5. Special function • : ; Protection of program ; ------------ _CP_ALL total protection ; _CP_HALF protection from 1000 to 1FFF ; _CP_UPPER_256 protection from 1F00 to 1FFF ; _CP_OFF no protection ; • Debugging ; --------- ; _DEBUG_ON RB6 and RB7 used to debug ; _DEBUG_OFF RB6 and RB7 used normally ; • Access to flash program ; -------------------------- ; _WRT_ENABLE_ON The program can be used in the flash ; _WRT_ENABLE_OFF The program cannot be written in the flash; • Protection of EEPROM ; ----------------------- ; _CPD_ON Memory EEPROM protected ; _CPD_OFF Memory EEPROM not protected ;

  6. Special function • Programming on circuit ; ------------------------- _LVP_ON RB3 can program the PIC ; _LVP_OFF RB3 normal utilization ; • Reset the PIC if potential <4V ; ------------------------------ ; _BODEN_ON Reset potential on service ; Valid PWRTE_ON automatically ; _BODEN_OFF Reset potential not worked ; • Retard when the power is ON ; ----------------------------- ; _PWRTE_OFF Quick start ; _PWRTE_ON temporized start ; • Watchdog ; -------- ; _WDT_ON Watchdog works ; _WDT_OFF Watchdog does not work

  7. Des Macros BANK0 macro ; passer to bank0 bcf STATUS,RP0 bcf STATUS,RP1 endm BANK1 macro ; pass to bank1 bsf STATUS,RP0 bcf STATUS,RP1 endm BANK2 macro ; pass to bank2 bcf STATUS,RP0 bsf STATUS,RP1 endm BANK3 macro ; pass to bank3 bsf STATUS,RP0 bsf STATUS,RP1 endm

  8. PIC and Keypad

  9. Keypad

More Related