'Vme fpga' presentation slideshows

Final FED Progress Report CMS Tracker Week 16th July 2003

Final FED Progress Report CMS Tracker Week 16th July 2003. FED FED-PMCs Status. Production of additional 40 FED-PMCs for Module Test setups. Some components were on last time buy (Xilinx 4036 FPGAs.) 40 cards have been Assembled.

240 views • 23 slides

On the development of the final optical multiplexer board prototype for the TileCal experiment

310 views • 21 slides

Tracker Off-detector Electronics

On-detector electronics production approaching completion procuring spares Off-detector electronics FED & FEC development complete substantial software development Power supplies prototyping of cavern version successful tender action complete ESRs completed

320 views • 20 slides

UA9 Telescope DAQ

UA9 Telescope DAQ. J. Fulcher Imperial College. DAQ Basics. Based upon slice of CMS Tracker DAQ ~ 1/440 of Tracker DAQ All subsystems used except: FEC CCU rings FMM FRL These are replaced by: Vi2c card to program the modules Simple electrical clock distribution

159 views • 15 slides

DDU Prototype

DDU Prototype. DMB Input FPGAs 2 XILINX Virtex2Pro-20. 4 Input FIFOs 512 KB each. GBE FIFO 1024 KB. VME FPGA XILINX Virtex2-500. 9U VME board, 220 mm depth. FMM output port. SLINK Mezzanine board connector. 15 Optical fiber inputs (just 1 for now). Gbit Ethernet Output

210 views • 7 slides

FEDv1 Final Firmware Subtasks

FEDv1 Final Firmware Subtasks. 15th May 2003. System ACE. EPROM. VME FPGA. Ed. DAC. Opto Rx. EPROM. Temp. ADC. System ACE. DAC. Opto Rx. VME Bus. Temp. ADC. Temp. VME. I2C. Clocks. Serial Comms. Regs. Clocks. Serial Comms. Regs. Input. Serial Comms. VME LINK.

184 views • 7 slides

FEDv1 Final Firmware Subtasks

FEDv1 Final Firmware Subtasks. 15th March 2004. System ACE. EPROM. VME FPGA. Ed->Saeed. DAC. Opto Rx. EPROM. Temp. ADC. System ACE. DAC. Opto Rx. VME Bus. Temp. ADC. VME. Clocks. I2C. Clocks. Serial Comms. Regs. Clocks. Serial Comms. Regs. Data. Input. Serial

171 views • 7 slides

9U FEDv1 New Production

9U FEDv1 New Production. Assembly of 6 boards FEDv1 design by DDi Technologies (pcbs Ni/Au finish by DDi Tewksbury) Received 4 boards on schedule (remaining 2 coming this week). At Assembly company : Advanced QA procedures

158 views • 4 slides