'Hazardous energy' presentation slideshows

SITE ACCESS AND SAFE WORK PRACTICES FOR PERFORMING WORK UNDER A CLEARANCE

SITE ACCESS AND SAFE WORK PRACTICES FOR PERFORMING WORK UNDER A CLEARANCE. Introduction

806 views • 67 slides

Lockout/Tagout Standard

Lockout/Tagout Standard. Proper Lockout Procedure. LOCKOUT/TAGOUT Contractors. The outside contractor and the on-site employer must exchange lockout/tagout information. Employees on site must understand rules used by the contractor. Be alert for new types of lockout or tagout devices.

952 views • 60 slides

Lockout/Tagout

Lockout/Tagout. MODULE 20. 1910.147(a)(1) Scope. Covers servicing and maintenance of machines and equipment in which Unexpected energization or start up or Release of stored energy could cause Injury to employees Normal operation is covered in 1910 Subpart O.

521 views • 50 slides

A Presentation of the SPI-OSHA Alliance

Lockout/Tagout for Thermoforming. Control of Hazardous Energy. A Presentation of the SPI-OSHA Alliance. The Society of the Plastics Industry, Inc. 1910.147 The Control of Hazardous Energy a.k.a. Lockout/Tagout (LOTO ).

676 views • 46 slides

Mike Lewis Construction Bechtel National, Inc. Hanford Waste Treatment and Immobilization Plant

613 views • 45 slides

LOCK AND TAG PROGRAM FOR THE CONTROL OF HAZARDOUS ENERGY

LOCK AND TAG PROGRAM FOR THE CONTROL OF HAZARDOUS ENERGY. (Version August 99) INSTRUCTOR: Tom Tamshen Certified Safety Professional Risk Management Department. OUTLINE. Training file on CD Rom Introduction Video L&T Program: General (1-4) Procedures ELP, GLP (5-7)

540 views • 45 slides

Lockout - Tagout

Lockout - Tagout. Subpart J. Fatal Five. Failure to stop equipment Failure to disconnect from power source Failure to dissipate (bleed, neutralize) residual energy Accidental restarting of equipment Failure to clear work areas before restarting. Scope and Application.

807 views • 42 slides

Breaking the Cycle of Risky Behavior

Four States & Four Critical Errors That Cause

831 views • 40 slides

A Presentation by Vincent & Vincent Companies

Lockout/Tagout for Injection Molding. Control of Hazardous Energy. A Presentation by Vincent & Vincent Companies. Vincent & Vincent Companies (Dept. of Loss Control Engineering) P.O. Box 304 Freeland, PA 18224. 1910.147 The Control of Hazardous Energy a.k.a. Lockout/Tagout (LOTO ).

505 views • 36 slides

OSHA 10-Hour Outreach Training Program for the Plastics Processing Industry

Lockout/Tagout for Injection Molding Control of Hazardous Energy. OSHA 10-Hour Outreach Training Program for the Plastics Processing Industry A Presentation of the SPI-OSHA Alliance. 1910.147 The Control of Hazardous Energy a.k.a. Lockout/Tagout (LOTO ).

556 views • 36 slides

Proposed Revision to ORPS Criteria for Hazardous Electrical Energy

Proposed Revision to ORPS Criteria for Hazardous Electrical Energy. Mike Hicks, DOE, Idaho Lloyd Gordon, LANL November 3, 2009. Purpose of this Presentation. To review problems with current ORPS categorization for electrical incidents

432 views • 28 slides

LIMITED APPROACH BOUNDARY

LIMITED APPROACH BOUNDARY. The Limited Approach Boundary (LAB) is the distance from an exposed energized electrical conductor or circuit part within which a shock hazard exists. For this presentation the LAB will be shown as a box instead of a circle as is customary.

822 views • 27 slides

Lockout / Tagout

1.76k views • 25 slides

Lockout / Tagout

Lockout / Tagout. 1910.147 The Control of Hazardous Energy. 1910.147(a)(1) Scope.

418 views • 24 slides

Lockout/Tagout

Lockout/Tagout. Affected Employees. Session Objectives. You will be able to: Recognize hazardous energy sources Carry out your responsibilities related to lockout/tagout Understand the purpose and use of energy control devices and procedures. What You Need to Know.

867 views • 23 slides

541 views • 18 slides

Objectives

Electrical Safety Orientation L ock o ut/ T ag o ut (LOTO) and Electrical Safety In The Workplace FN000387/CR. Objectives. Introduce the concept of LOTO Introduce LOTO terminology Recognize LOTO locks and tags Recognize types of hazardous energy Introduce Configuration Control concept

323 views • 15 slides

What is Lockout and Tagout ?

Intro and Overview. What is Lockout and Tagout ?. These are measures to control hazardous energy, as anyone working on machinery may be exposed to injuries from energy surges, machine startup, or release of energy stored in the equipment. Intro and Overview. What is hazardous energy?.

487 views • 14 slides

Control of Hazardous Energy

Control of Hazardous Energy. Lockout/Tagout 29 CFR 1910.147. Electrical Hydraulic Pneumatic Kinetic. Potential Thermal Chemical Radiation. Lockout/tagout is a hazardous energy control program. Tagouts. Do not start Do not open Do not close Do not energize. TAG LIMITATIONS.

266 views • 11 slides

What to Do When an Event Occurs at Jefferson Lab

What to Do When an Event Occurs at Jefferson Lab. When an unanticipated event occurs, there are a number of steps that need to be taken to assure the injured are taken care of and the scene preserved so that an effective investigation can be conducted.

79 views • 3 slides