1 / 9

6 Steps To Refinish Wood Gym Floors Properly

With the amount of striking gym floors must suffer, it is no wonder they get scratched up often. The following steps help you in proper floor refinishing. For further guidance visit - http://www.gymsportsflooring.com

sandyelmore
Download Presentation

6 Steps To Refinish Wood Gym Floors Properly

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. 6 Steps To Refinish Wood Gym Floors Properly

  2. Instead of replacing the scratched floor, they can be refinished over and over again.

  3. 1. The gym floor must be thoroughly cleaned before the refinishing process is to begin.

  4. 2. Place 20-grit sandpaper into a drum sander,plug it in and allow the sander to move forward across the surface to be treated.

  5. 3. Take the disc sander & run it over the areas of the floor the drum sander could not reach, such as corners of walls.

  6. 4. Place the 50-grit sandpaper into the drum sander. Cover the entire floor with the sandpaper. Remove all dust with a big sweeper.

  7. 5. The final step is to apply the stain to the floor with a rag. Have the stain set into the wood for at least 8 hours.

  8. 6. Apply the final coat of sealer and Wait 2 days before using the floor.

  9. Gymsportsflooring.Com

More Related