1 / 5

ESS PVSS software – status

ESS PVSS software – status. ESS FSM actions and state flow diagram for SM : ERROR – if information is completely lost for one SM module ESS fw component:

sadah
Download Presentation

ESS PVSS software – status

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. ESS PVSS software – status • ESS FSM actions and state flow diagram for SM: ERROR – if information is completely lost for one SM module • ESS fw component: • “generic”: on fw component for any area, one selects the desired area in 30 sec (or MTCC configuration will be installed by default)… • …but it stores all configuration info in its .dpl files (not really generic); • supports “automatic” SM change in a SM “position”; • supports FSM panel(s) for 1 RU (4 SMs) instead of 12 Rus; • supports archiving to Oracle DB (…but some problems detected…)

  2. ESS PVSS software – needs to be done In the (very) near future: • Communication “PVSS-to-PLC“ via PVSS S7 driver; • Similar component installation procedure with area and configuration info stored in ConfigurationDB; • Implement Access Control; • Implement RU mapping? RU in FSM? Higher level nodes for ESS?; • Hope that fwTranding problem will be solved • ESS panels for ESS commisioning (and maintenance) and SM power up procedures • Proposed “software safety” – should support SM granularity In the (not so) far future: • Test of redundant configuration and redundant (protected) “PVSS-PC.Ethernet-PLC.Ethernet-PLC.CPU” connection

  3. Back up slide(s)

  4. ESS PLC software – status • Multipoint protocol for ESS ready and (partly) tested since beginning of November 2006. • ESS PLC and PIC software (RC1) under further development (by mid December 2006.) • Installation of 3 RU in 867 and 3 RU in H4&H2 (testing/debugging continuously) in December 2006. • Installation of the rest of hardware (6 RU + 9 IU)in Service/Experimental hall (mounting, cabling, mapping, checking etc.) in December • Configuration of ESS PLC as a complete redudant system during 2007.

  5. ESS MTBF calculation

More Related