1 / 13

Pharos University EE-385

Pharos University EE-385. Electrical Power & Machines “Electrical Engineering Dept” Prepared By: Dr. Sahar Abd El Moneim Moussa. Single Phase System. Review on AC Circuit. Basic Principles:

Download Presentation

Pharos University EE-385

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Pharos UniversityEE-385 Electrical Power & Machines “Electrical Engineering Dept” Prepared By: Dr. SaharAbd El MoneimMoussa Dr. Sahar Abd El Moneim Moussa

  2. Single Phase System Dr. Sahar Abd El Moneim Moussa

  3. Review on AC Circuit • Basic Principles: • Sinusoidal voltage source: it is a source that produces voltage that varies with time as sine wave • Waveform: Where: T: periodic time: the time of one complete cycle. f: number of cycles per second = 1/T Hz ω: angular frequency of the sine wave = 2πf rad/sec T Dr. Sahar Abd El Moneim Moussa

  4. Equation: V(instantaneous)= Vm sin ωt Where: Vm : The maximum voltage value & it is knows as the amplitude Vrms : Root mean square of the voltage = • Symbol: ~ V(t)= Vm sin ωt Dr. Sahar Abd El Moneim Moussa

  5. V(t)= Vm sin ωt • Resistive Circuit • Circuit diagram: • Equation: • V= Vm sin ωt , I= Imsin ωt • Waveform: “in terms of the time domain” • Phasor diagram: ∴The Resistive current is in phase with the voltage Im Vm Dr. Sahar Abd El Moneim Moussa

  6. Xc = 1/ωc Ω • Capacitive Circuit • Circuit diagram: • Equation: • V= Vm sin ωt , I= Imsin (ωt+90) • Waveform: • Phasor Diagram: Where θ is the angle between the voltage and the current ( cosθ is called the power factor ) ∴The Capacitive current leads the voltage by 90o Im θ Vm Dr. SaharAbd El MoneimMoussa

  7. XL = ωL Ω • Inductive Circuit • Circuit diagram: • Equation:V= Vm sin ωt , I= Imsin (ωt-90) • Waveform: • Phasor Diagram: Where θ is the angle between the voltage and the current ( cosθ is called the power factor ) ∴The Inductive current lags its voltage by 90o Vm θ Im Dr. SaharAbd El MoneimMoussa

  8. Dr. Sahar Abd El Moneim Moussa

  9. Power in a Single-Phase System • Active Power, P, Watt: The electric energy per second consumed by the resistive loads in the circuit which can be withdrawn outside the circuit as thermal, mechanical, light or another forms of energy P= VrmsIrms Cos θ watt • Reactive Power, Q, VAR: This type of power is the source of the energy stored in the circuit & used to maintain the magnetic field in case of the inductor ORthe electric field in case of the capacitor P= VrmsIrms Sin θ VAR This type of energy cannot be withdrawn outside the circuit Dr. Sahar Abd El Moneim Moussa

  10. Apparent Power, S, VA: The resultant of the active & reactive power S= Vrms I*rms  S= Vrms Irms ∠ -θ VA Q Q P S Q Source Load θ P P V Dr. SaharAbd El MoneimMoussa

  11. Itotal IL IC IR NOTE: • Circuit diagram: • Equations: v(t)= Vm sinωt iR (t)= IRm sin ωt iL (t)= ILm sin(ωt-90) iC (t)= ICm sin(ωt+90) • Phasor diagram of the current: I IC IR V Ѳ IL - IC Itotal IL Dr. SaharAbd El MoneimMoussa

  12. I • Phasor diagram of the power: P=S Cos θ = I2 R V Ѳ Q=S Sin θ = I2 X S=VrmsIrms Dr. SaharAbd El MoneimMoussa

  13. Therefore, the power triangle will be P Ѳ Q S Dr. Sahar Abd El Moneim Moussa

More Related