1 / 42

Low Volume Roads Design Manuals & Specifications

Low Volume Roads Design Manuals & Specifications. Amare Assefa August 2013. CONTENTS. A. OBJECTIVE OF THE PRESENTATION.

raleigh
Download Presentation

Low Volume Roads Design Manuals & Specifications

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Low Volume Roads Design Manuals & Specifications AmareAssefa August 2013

  2. CONTENTS

  3. A. OBJECTIVE OF THE PRESENTATION • to increase awareness amongst road agency staffs, private sector practitioners and academics on the availability of the New Low Volume Roads Design Manuals, Standard Specifications and Standard Bidding Documents; and future update

  4. B. BASIC INFORMATION ON LOW VOLUME ROADS • Low volume roads in Ethiopia typically carry less than 300 vehicles per day and less than 1.0 million ESAL. • Provide important links to markets between woreda center and the Federal road network and access to other essential services • Majority of the total road network of the country can be considered as low volume roads • Located in diverse geographical, social and climatic conditions

  5. B. BASIC INFORMATION ON LOW VOLUME ROADS

  6. C. INTRODUCTION TO LOW VOLUME ROADS DESIGN MANUAL 1. WHY LVR MANUAL ? • Consists of majority of the total road network • The Standard Approach remain overly conservative, inappropriate and far too costly for application on much of the country’s rural road network. • So far opportunities are missed that would provide better and lower cost engineering solutions • Application of appropriate design standards • Better understanding and use of locally available materials • Alternative options for road surfacing • Application of innovative construction techniques • Greater use of local labor

  7. 1. WHY LVR MANUAL ?(Contd.) • Ethiopian Roads Authority (ERA) has developed its first comprehensive national road design manual, technical specifications and bidding documents specifically for low volume roads. • The series describe current and recommended practice and set out the national standards for roads and bridges. • This Low Volume Roads Manual promotes rational, appropriate and affordable designs for low volume roads in Ethiopia.

  8. 1. WHY LVR MANUAL ?(Contd.) • Aims to optimize construction and maintenance costs and meet requirements to: • Improve the economic and social well being of rural communities • Improve access to social and other services; • Lower road user costs and promote socio-economic development, • Reduce import dependency • This Design Manual for Low Volume Roads (2011) forms part of the Ethiopian Roads Authority series of Road and Bridge Design Manuals.

  9. 1. WHY LVR MANUAL ?(Contd.) • The complete series of documents Consists: • Geometric Design Manual – 2013 • Site Investigation Manual – 2013 • Geotechnical Design Manual for Slopes - 2013 • Pavement Design Manual Volume I – 2013 (Flexible Pavements and Gravel Roads) • Pavement Design Manual Volume II – 2013 (Rigid Pavements) • Pavement Rehabilitation and Asphalt Overlay Manual – 2013 • Drainage Design Manual – 2013 • Bridge Design Manual – 2013 • Standard Technical Specifications – 2013 • Standard Detailed Drawings – 2013 • Standard Bidding Documents - 2002 • Low Volume Roads Design Manuals – 2011

  10. 1. WHY LVR MANUAL ?(Contd.)

  11. 1. WHY LVR MANUAL ?(Contd.)

  12. 2. CONTEXT AND SCOPE OF LVR MANUAL • Low volume roads as any other roads require well thought out design • The design shall satisfy the standard set for this particular type of road. • The design shall also include environmental and social aspects.

  13. 2. CONTEXT AND SCOPE OF LVR MANUAL (Contd.) • The successful design of low volume roads relies on: • A full understanding by the design engineer of the local environment (natural and social); • An ability to work within the demands of the local environment and to turn these to a design advantage; • Recognition and management of risk; • Innovative and flexible thinking through the application of appropriate engineering solutions rather than following traditional thinking related to road design; • A client who is open and responsive to innovation; • Guaranteed routine and periodic maintenance.

  14. 2. CONTEXT AND SCOPE OF LVR MANUAL (Contd.) • Road network classification • The functional classification of roads in Ethiopia is based on five classes: • Trunk roads: roads linking Addis Ababa to centers of international importance and to international boundaries; • Link roads: connecting centers of national and international importance such as principal towns and urban centers; • Main access: connecting centers of provincial importance; • Collectors: connecting locally important centers to each other or to a more important centre or to a higher class road; and • Feeder roads: connecting minor centers such as a market to other parts of the network

  15. 2. CONTEXT AND SCOPE OF LVR MANUAL (Contd.) • Low volume roads can be represented in all five of these functional classes. • Roads in Ethiopia can be further divided into three categories depending on ownership: • Federal (the responsibility of the Ethiopian Roads Authority); • Regional (the responsibility of the Regional or Rural Roads Authorities); and • Other rural roads (the responsibility of local authorities at Woreda or Kebele level or communities).

  16. 2. CONTEXT AND SCOPE OF LVR MANUAL (Contd.) • Classification of roads in Ethiopia based on geometric standards and level of service

  17. 2. CONTEXT AND SCOPE OF LVR MANUAL (Contd.) • Level A: • The highest level of service. • Traffic is free flowing, • Safety is a high priority. • Design speed is very important and takes precedence over topographic constraints. • Level B: • Traffic may not flow smoothly in all situations. • Safety is a high priority, • Design speed is important, but topography may dictate some design changes and controls

  18. 2. CONTEXT AND SCOPE OF LVR MANUAL (Contd.) • Level C: • The efficiency of traffic movement and flow is not a limiting factor. • Some design controls may need to be applied. • Safety provisions are adapted to lower and variable speed scenarios. • The topography will dictate alignment and the design speed.

  19. 2. CONTEXT AND SCOPE OF LVR MANUAL (Contd.) • Level D: • Service level is geared to provision of access rather than efficiency. • Design standards for water crossings may allow service interruption • Other design standards for geometrics, surfacing and safety will reflect lower speed environments and access requirement.

  20. 2. CONTEXT AND SCOPE OF LVR MANUAL (Contd.) • Design Principles • Deterioration of the unpaved low volume roads is governed by • the type of material used on the surface (gravel to soil); • The strength of the underlying soil (soft, erodible and/or expansive), • the type and action of traffic (heavy vehicle to pedestrian) and, • the influence of the “road environment”. • natural or bio-physical environment and • the human environment. • Controllable and uncontrollable factors

  21. 2. CONTEXT AND SCOPE OF LVR MANUAL (Contd.)

  22. 2. CONTEXT AND SCOPE OF LVR MANUAL (Contd.) • Hence, the design approach needs to recognize such influence by providing options that minimize the negative effects. • Typical road environment factors are covered in more detail in Part D, Chapter 6 of the Manual.

  23. 2. CONTEXT AND SCOPE OF LVR MANUAL (Contd.) • Context Sensitivity Factors to be looked into in addition to technical & financial aspects, for successful LVR design approach and long term sustainability.

  24. 2. CONTEXT AND SCOPE OF LVR MANUAL (Contd.) • Political Support • Demand for low volume road provision needs to be framed under a national policy • should be supported at the highest level. • The social and economic goals of poverty alleviation and development • Protection of the environment; • The use of appropriate technology

  25. 2. CONTEXT AND SCOPE OF LVR MANUAL (Contd.) • Social acceptance Provision of low volume rural road networks should be managed in a way that: • Ensures community participation • Eliminates gender bias; • Promotes activities and investment for sustainable livelihoods (including Complementary Interventions shown in Part C); • Promotes road safety in all aspects • Supports cost-effective labor-based and intermediate equipment methods; and • Minimizes resettlement.

  26. 2. CONTEXT AND SCOPE OF LVR MANUAL (Contd.) • Institutional capacity Road authorities and clients should: • Promote institutional, economic and technical understanding in the provision and management of low volume roads; • Promote commercial management practices; • Develop a conducive environment for the development of national contractors; • Ensure that design, construction and maintenance approaches for low volume roads are represented on all tertiary civil engineering training curricula.

  27. 2. CONTEXT AND SCOPE OF LVR MANUAL (Contd.) • Technology choice Technologies for designing, constructing and maintaining low volume roads should: • Employ appropriate design standards and specifications; • Utilize intermediate equipment technology options; • Promote road construction and maintenance technologies that create employment opportunity; • Use types of contract that support the development of domestic contractors and consultants; • recognize potential impacts of a changing climate.

  28. 2. CONTEXT AND SCOPE OF LVR MANUAL (Contd.) • Economic viability Economic appraisal for low volume roads should: • be capable of quantifying social, economic and environmental costs and benefits; • Ensure investment decisions are based on an assessment of whole life costs.

  29. 2. CONTEXT AND SCOPE OF LVR MANUAL (Contd.) • Financially sound Sustainable provision of LVRs depends on the sustainable provision of funding to the sector in that: • Roads should not be upgraded to engineered standards if funding is not in place for routine and periodic maintenance requirements. • Designs should not be forwarded that require excessive allocation of maintenance resources.

  30. 2. CONTEXT AND SCOPE OF LVR MANUAL (Contd.) • Protection of the environment The design and management of low volume roads should: • Minimize the physical impacts of construction and maintenance; • Take account of socio-cultural impacts; • Optimize resource management and allow for recycling of non-renewable materials; and

  31. 3. Structure and Layout The Manual is divided into five parts: • Part A provides an overview of the Manual, its application, context, use and introduces the philosophy of low volume road design. • Part B sets out typical design controls that should be considered during the design process and the national design standards for low volume roads in Ethiopia. • Part C describes how complementary interventions and activities can be introduced into the road works contract and how these can add value and impact to the project for the client and beneficiary communities, and users.

  32. 3. Structure and Layout (Contd.) • Part D provides the engineering details and guidance on the application of the national standards for the design of low volume roads given in Part B. • Part E provides the engineering details and guidance on the design of low level structures and water crossings for low volume roads. • Part F provides technical guidelines for the construction of unstiffened pedestrian suspended and suspension type cable bridges. • Part G sets out guidance on how to maintain low volume roads using the available limited resources.

  33. 3. Structure and Layout (Contd.) • Besides it includes : • Standard specification and method of measurement • Standard Bidding Documents and their respective guidelines for works contracts and; • RFPs for design and supervision services • TORs for design and supervision • RFP could be prepared based on PPA standard document

  34. 3. Structure and Layout (Contd.)

  35. 3. Structure and Layout (Contd.)

  36. 3. Structure and Layout (Contd.)

  37. 3. Structure and Layout (Contd.)

  38. 3. Structure and Layout (Contd.)

  39. 4. PROJECT IMPLEMENTATION • Clearly defined requirements and adequate provisions in all bidding and contract documents is vital for successful implementation of a project • The approach used for execution of low volume roads can differ in many respects from the traditional road provision approaches. • client may favor labor-based approaches; • the use of intermediate equipment; • sub-contracting to empower small enterprises; • and/or additional enhancements through complementary interventions

  40. 4. PROJECT IMPLEMENTATION (Contd.) • It is therefore important that the provisions within the bidding documents clearly reflect these preferences • Standard Bidding Documents for Major Work, ICB & NCB – Unlimited contract value • Standard Bidding Document for Intermediate Works (based on PPA 2006), ICB & NCB - Maximum contract value USD 10 Million

  41. 4. PROJECT IMPLEMENTATION (Contd.) • Standard Bidding Document for the Procurement of Minor Works – Maximum contract value USD3 Million; • Standard Bidding Document for the Procurement of Micro Works – Maximum contract value USD300,000. • For each of the above SBDs a User Guide has been developed to provide guidance to those who may be employed in preparing the documents.

  42. I Thank You !!!

More Related