1 / 10

Data Acquisition Software Integration and ADC Characterisation

Data Acquisition Software Integration and ADC Characterisation. Jack Hobbs 4 th August 2009. 1. The Original Aims. We should have the ability to operate the Analogue to Digital Converter (ADC) from a LabVIEW data acquisition program.

radke
Download Presentation

Data Acquisition Software Integration and ADC Characterisation

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Data Acquisition Software Integration and ADC Characterisation Jack Hobbs 4th August 2009 1

  2. The Original Aims • We should have the ability to operate the Analogue to Digital Converter (ADC) from a LabVIEW data acquisition program. • This program should be able to set up and alter any settings the ADC has. • Ideally this could then be extended to the eventual full setup of 6 ADCs planned. 2

  3. What This Means • Write a collection of Dynamic Link Libraries (.dll) using the C programming language. • These will sit on top of the Jungo libraries and USB drivers and make the operation of the ADC simple for any user or program that uses them. • Write a LabVIEW program referencing these DLLs to operate the ADC. 3

  4. USB Functions  • Initialise Communication • Establish a connection • Get the device parameters • Transfer the “HEX file” • Create a “Device Handle” • End Communication  4

  5. ADC Functions • 16 channels of with individual settings: • Active • Gain • Average • AC/DC • Sample rate • Triggering • Resetting        5

  6. ADC Functions   • Direct altering of registry values • Continuous Mode (FFI) • Burst Mode (FSI) • Test Mode • Start acquisition • Stop acquisition • Acquire error flags (Decode data)        6

  7. What Has Been Done • Everything with a tick has been written. • Only the initialisation has been tested. It works. • A centralised error code header file has been written.  7

  8. What Is Left To Do • All the crosses need to change to ticks. • Decoding the output binary file should be easy. It is a separate task. • I think it will be harder to implement the processes that surround actual data acquisition. • A LabVIEW program must then be written.  8

  9. Data Acquisition • Will require more thought than the rest of the code. • The C++ code and older DAQ software encounters problems with continuous mode. • These are fundamental problems that have to be addressed before the C code is written. 9

  10. Summary • We should be able to set up the ADC soon. • Next the ADC needs to be triggered for operation and transfer of data. This will take longer. • Finally a LabVIEW program will be written to control every aspect of the ADC’s operation. 10

More Related