1 / 11

Data Acquisition

Data Acquisition. From receivers to correlator Data Acquisition System Recorder Station Unit – DAS2 Correlator Key Features: Digital, KISS recording Longitudinal, X-track/pass/head, mux, barrel-roll. Samplers/ADCs. Sample at Nyquist rate: at twice maximum frequency in the band.

merv
Download Presentation

Data Acquisition

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Data Acquisition • From receivers to correlator • Data Acquisition System • Recorder • Station Unit – DAS2 • Correlator • Key Features: • Digital, KISS recording • Longitudinal, X-track/pass/head, mux, barrel-roll

  2. Samplers/ADCs • Sample at Nyquist rate: at twice maximum frequency in the band. • Digitise samples to 1-bit or 2-bit precision • Accept 36% or 13% loss of sensitivity. • (Be prepared to accept more losses when data are resampled after phase rotation)

  3. Data Multiplexing • Until VLBA, one channel = one track • Can multiplex (mux) bitstreams N to 1 (fan in) • Or demux 1 to N bitstreams (fan out) • For faster or slower playback with • Increased efficiency or • Enhanced spectral resolution respectively. • NOTE: N = 1, 2 or 4, maybe.

  4. Barrel-Rolling • Tracks can be swapped repetitively • Principle is one of shared misery • All suffer, not just one • But have to keep “track” of tracks and • Keep inverse process time aligned: • Use AUX data field and • Swap between data frames

  5. Data Modulation • Reproduction is via Faraday’s Law of magnetic induction – no magneto-resistive replay heads. • Frequency response is poor at low frequencies. • Nearly all ‘1’s and nearly all ‘0’s are bad. • Optionally, can modulate data in each frame with a fixed pseudo-random sequence. Makes long runs of constant data unlikely. • This aids the recovery of the clock from bit stream.

  6. Data Frames – Each Track (64!) • 22,500 bits per frame, frame rates 800, 400, .. Per second. • 64-bit AUX data (e.g. track label) • 36-bit SYNC pattern • 64-bit time code and CRC • 19840-bit astronomical data • 2496-bit odd parity (1 for 8) except over SYNC • NOTE: parity changes rate from 16 to 18Mbps • Manchester encoded for clock/data recovery.

  7. Station Unit • Philosophy: SSIK • Has to be undo correctly all that has been done -as if data had not been recorded. Ultimate aim: to produce channel bitstreams as if they were coming from the samplers/ADCs. • Has to do some extra jobs as well and has to interface gracefully to the correlator.

  8. SU Modules • CkRM: clock and data recovery from bitstream • TRM: track recovery module – reform frames • CRM: channel-recovery module (demux, barrel) • Phase calibration • DM: delay module provides signal delays • SUIM: SU interface module provides sampler statistics, pulsar gating, correlator headers with delay step and phase information for correlator, and reserialises the data

  9. Reference • See “Mark IIIA/IV/VLBA Tape Formats, Recording Modes and Compatibility” by A.R. Whitney. • ftp://dopey.haystack.edu/pub/mark4/memos/230.3.pdf • Next talk: VLBI Correlators

More Related