1 / 13

Implant- Secured Dentures using Locator ® Abutments

®. Implant- Secured Dentures using Locator ® Abutments. Reline a Locator Denture- Replace Denture Caps Step-by-Step. Reline a Locator ® Denture- Replace Denture Caps.

phoebe
Download Presentation

Implant- Secured Dentures using Locator ® Abutments

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. ® Implant- Secured Denturesusing Locator® Abutments Reline a Locator Denture-Replace Denture Caps Step-by-Step

  2. Reline a Locator® Denture-Replace Denture Caps Step 1: Grind out Denture Caps from denture and, similar to a retrofit procedure, create a concave recess in the denture with a bur at each location where a new Denture Cap will be retrofitted during the reline process. LOCATOR® IS A REGISTERED TRADEMARKOF ZEST ANCHORS, INC. ALL RIGHTS RESERVED

  3. Reline a Locator® Denture-Replace Denture Caps Denture Cap Step 2: Place new Denture Caps on Locator Abutments. Note: These Denture Caps will act as impression copings at this step in the reline process.

  4. Reline a Locator® Denture-Replace Denture Caps Step 3: Using a marking material, verify passive fit of denture on tissue with no contact to Denture Caps.

  5. Reline a Locator® Denture-Replace Denture Caps Step 4: Apply impression tray adhesive to the internal aspect of the denture.

  6. Reline a Locator® Denture-Replace Denture Caps Denture Caps, acting as impression copings, are picked up into impression Step 5: Apply impression material to the internal aspect of the denture. Take a reline impression with the patient in passive, centric occlusion utilizing a border mold impression technique. Send to lab.

  7. Reline a Locator® Denture-Replace Denture Caps Analog Step 6: Lab places analogs into Denture Caps.

  8. Reline a Locator® Denture-Replace Denture Caps Denture Cap Step 7: Lab pours master cast. Remove Denture Caps from impression and place on analogs.

  9. Reline a Locator® Denture-Replace Denture Caps New Denture Caps retrofitted and cured into relined denture. Step 8: Lab relines denture on master cast with new Denture Caps in place.

  10. Reline a Locator® Denture-Replace Denture Caps Black processing inserts inside the denture cap. Black processing inserts are used for relining the denture only and must be removed.

  11. Reline a Locator® Denture-Replace Denture Caps Removal Tool Step 9: Lab “plucks-out” and removes black processing insert using the Removal Tool of the Locator Core Tool. Image courtesy of Dr. Bob Vogel

  12. Reline a Locator® Denture-Replace Denture Caps Step 10: New Retention Rings are selected and placed into the New Denture Caps of the relined denture.

  13. Reline a Locator® Denture-Replace Denture Caps Step 11: When relined denture is returned from lab, place into patient, check for pressure spots, and adjust the occlusion.

More Related