1 / 17

COSMOS Summer 2008 Chips and Chip Making

COSMOS Summer 2008 Chips and Chip Making. Rajesh K. Gupta Computer Science and Engineering University of California, San Diego. Roadmap. Topic: Integrated circuit chips This lecture IC Chips, Chip making ingredients and steps. Reference

penha
Download Presentation

COSMOS Summer 2008 Chips and Chip Making

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. COSMOS Summer 2008Chips and Chip Making Rajesh K. Gupta Computer Science and Engineering University of California, San Diego. 2008 R. Gupta, UCSD

  2. Roadmap Topic: Integrated circuit chips This lecture IC Chips, Chip making ingredients and steps. Reference “How chips are made” – Intelhttp://www.intel.com/education/makingchips/index.htm “Microelectronics 101” – IBMhttp://www-306.ibm.com/chips/technology/makechip Keywords: • 2008 R. Gupta, UCSD

  3. The Chip: A Packaged Part Quad Flat Pack (QFP) Ball Grid Array (BGA) http://education.netpack-europe.org/chipp.php

  4. The Die Under a Microscope Intel 4004 (‘71) Intel 8080 Intel 8085 Intel 8486 Intel 8286

  5. A Gate Layout Defines a set of “masking layers” for printing purposes.

  6. The Ingredients Silicon Wafers cut from an ingot of pure silicon. Chemicals and gases are used throughout the chip-making process. Metals, such as aluminum and copper, are used to conduct the electricity throughout the microprocessor. Gold is also used to connect the actual chip to its package. Ultraviolet (UV) Light has very short wavelengths and is just beyond the violet end of the visible spectrum. Masks used in the chip-making process are like stencils. When used with UV light, masks create the various circuit patterns on each layer of the chip. [Courtesy Intel. Adapted from http://www.intel.com/education/teachtech/learning/chips/preparation.htm]

  7. Building Chip Start with a disk of silicon called wafer 75 mm to 300 mm in diameter, < 1 mm thick cut from ingots of single-crystal silicon pulled from a crucible of pure molten polycrystalline silicon using a seed crystal Different processing steps and techniques Introduce dopants Oxidation Masking Polysilicon

  8. Introduce Dopants Pure silicon is a semiconductor bulk electrical resistance in between that of a conductor and insulator Conductivity of silicon can be varied several orders of magnitude by introducing impurity atoms called dopants acceptors: accept electrons to leave holes in silicon lead to p-type silicon (e.g. Boron) donors: provide electrons to silicon lead to n-type silicon (e.g. Arsenic, Phosphorous)

  9. Introduce Dopants (2) Deposition through diffusion evaporating dopant material into the silicon surface thermal cycle: impurities diffuse deeper into material Ion Implantation silicon surface subjected to highly energized donor or acceptor atoms atoms impinge silicon surface, and drive below it to form regions of varying concentrations Ion Implantation

  10. Oxidation Method 1: Heating silicon wafers in an oxidizing atmosphere (O2 or H2O) Consumes Si Grows equally in both vertical directions Method 2: Deposition Deposited on top of existing layers

  11. Masking Masks act as barrier against e.g. ion implantation dopant deposition before diffusion (dopants do not reach surface) oxidation (O2 or H2O does not reach surface) Commonly used mask materials photoresist polysilicon silicon dioxide (SiO2) silicon nitride (SiN)

  12. Example: oxide mask • bare silicon wafer • oxidize wafer • deposit layer of photoresist • expose the photoresist selectively to UV light • The drawn mask pattern determines which part is exposed • Resist polymerizes where exposed

  13. unexposed resist is removed with solvent: negative resist • (positive resist: exposed resist is removed) • exposed oxide is etched • photoresist is washed off • the oxide can now be used as a masking layer for ion implantation

  14. The Printing Challenge • UV lithography: line width limited by diffraction and alignment tolerances, but tricks are used • Electron beam lithography has emerged: directly from digital data, but more costly and slow

  15. Polysilicon Silicon also comes in a polycrystalline form called polysilicon, or just poly high resistance normally doped at the same time as source/drain regions Used as an interconnect in silicon ICs gate electrode in MOS transistors most important: acts as a mask to allow precise definition of source and drain extension under gate minimum gate to source/drain overlap improves circuit performance (why?) called self-aligned process

  16. The Design Process

  17. Packaging Single die Wafer From http://www.amd.com

More Related