1 / 20

ECE 255: Introduction on Electronic Analysis and Design

ECE 255: Introduction on Electronic Analysis and Design Prof. Peide (Peter) Ye Office: Birck 2295 E-mail: yep@purdue.edu Tel: 494-7611 Course website: http://cobweb.ecn.purdue.edu/~yep/courses.htm Location:Grissom Hall 103 Time: MWF 12:30-1:20 pm Office Hour: MWF 1:30-2:30 pm.

Download Presentation

ECE 255: Introduction on Electronic Analysis and Design

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. ECE 255: Introduction on Electronic Analysis and Design Prof. Peide (Peter) YeOffice: Birck 2295E-mail: yep@purdue.eduTel: 494-7611Course website: http://cobweb.ecn.purdue.edu/~yep/courses.htmLocation:Grissom Hall 103Time: MWF 12:30-1:20 pmOffice Hour: MWF 1:30-2:30 pm

  2. Intrinsic Carrier Concentration • The density of carriers in a semiconductor as a function of temperature and material properties is: • EG = semiconductor bandgap energy in eV (electron volts) • k = Boltzmann’s constant, 8.62 x 10-5 eV/K • T = absolute termperature, K • B = material-dependent parameter, 1.08 x 1031 K-3 cm-6 for Si • Bandgap energy is the minimum energy needed to free an electron by breaking a covalent bond in the semiconductor crystal.

  3. Intrinsic Carrier Concentration (cont.) • Electron density is n (electrons/cm3) and ni for intrinsic material n = ni. • Intrinsic refers to properties of pure materials. • ni ≈ 1010 cm-3 for Si Intrinsic carrier density (cm-3)

  4. Electron-hole concentrations • A vacancy is left when a covalent bond is broken. • The vacancy is called a hole. • A hole moves when the vacancy is filled by an electron from a nearby broken bond (hole current). • Hole density is represented by p. • For intrinsic silicon, n = ni = p. • The product of electron and hole concentrations is pn = ni2. • The pn product above holds when a semiconductor is in thermal equilibrium (not with an external voltage applied). pn = ni2

  5. Drift Current • Electrical resistivity and its reciprocal, conductivity , characterize current flow in a material when an electric field is applied. • Charged particles move or drift under the influence of the applied field. • The resulting current is called drift current. • Drift current density is j = Qv (C/cm3)(cm/s) = A/cm2 j = current density, (Coulomb charge moving through a unit area) Q = charge density, (Charge in a unit volume) v = velocity of charge in an electric field. Note that “density” may mean area or volumetric density, depending on the context.

  6. Mobility • At low fields, carrier drift velocity v (cm/s) is proportional to electric field E (V/cm). The constant of proportionality is the mobility, : • vn = - nE and vp = - pE , where • vn and vp = electron and hole velocity (cm/s), • n and p = electron and hole mobility (cm2/Vs) • Hole mobility is less than electron since hole current is the result of multiple covalent bond disruptions, while electrons can move freely about the crystal.

  7. Velocity Saturation At high fields, carrier velocity saturates and places upper limits on the speed of solid-state devices.

  8. Example: Calculate the resistivity of intrinsic silicon Problem: Find the resistivity of intrinsic silicon at room temperature and classify it as an insulator, semiconductor, or conductor. Solution: Known Information and Given Data: The room temperature mobilities for intrinsic silicon were given right after Eq. 2.5. For intrinsic silicon, the electron and hole densities are both equal to ni. Unknowns: Resistivity  and classification. Approach: Use Eqs. 2.8 and 2.9. [ = q(n n + p p) (cm)-1] Assumptions: Temperature is unspecified; assume “room temperature” with ni = 1010/cm3. Analysis: Next slide…

  9. Intrinsic Silicon Resistivity • Given drift current and mobility, we can calculate resistivity: jndrift = Qnvn = (-qn)(- nE) = qn nE A/cm2 jpdrift = Qpvp = (-qp)(- pE) = qp pE A/cm2 jTdrift =jn + jp = q(n n + p p)E = E This defines electrical conductivity:  = q(n n + p p) (cm)-1 Resistivity  is the reciprocal of conductivity:  = 1/ (cm)

  10. Example: Calculate the resistivity of intrinsic silicon (cont.) Analysis: Charge density of electrons is Qn = -qni and for holes is Qp = +qni. Substituting into Eq. 2.8:  = (1.60 x 10-10)[(1010)(1350) + (1010)(500)] (C)(cm-3)(cm2/Vs) = 2.96 x 10-6(cm)-1 --->  = 1/ = 3.38 x 105cm From Table 2.1, intrinsic silicon is near the low end of the insulator resistivity range Check of Results: Resistivity has been found, and intrinsic silicon is a poor insulator.

  11. Donor Impurities in Silicon • Phosphorous (or other column V element) atom replaces silicon atom in crystal lattice. • Since phosphorous has five outer shell electrons, there is now an ‘extra’ electron in the structure. • Material is still charge neutral, but very little energy is required to free the electron for conduction since it is not participating in a bond.

  12. Acceptor Impurities in Silicon • Boron (column III element) has been added to silicon. • There is now an incomplete bond pair, creating a vacancy for an electron. • Little energy is required to move a nearby electron into the vacancy. • As the ‘hole’ propagates, charge is moved across the silicon.

  13. Acceptor Impurities in Silicon (cont.) Hole is propagating through the silicon.

  14. Doped Silicon Carrier Concentrations • If n > p, the material is n-type.If p > n, the material is p-type. • The carrier with the largest concentration is the majority carrier, the smaller is the minority carrier. • ND = donor impurity concentration atoms/cm3NA = acceptor impurity concentration atoms/cm3 • Charge neutrality requires q(ND + p - NA - n) = 0 • It can also be shown that pn = ni2, even for doped semiconductors in thermal equilibrium.

  15. Diffusion Current (cont.) • Carriers move toward regions of lower concentration, so diffusion current densities are proportional to the negative of the carrier gradient. Diffusion currents in the presence of a concentration gradient. Diffusion current density equations

  16. Diffusion Current (cont.) • Dp and Dn are the hole and electron diffusivities with units cm2/s. Diffusivity and mobility are related by Einsteins’s relationship: • The thermal voltage, VT =kT/q, is approximately 25 mV at room temperature. We will encounter VT throughout this book.

  17. Total Current in a Semiconductor • Total current is the sum of drift and diffusion current:Rewriting using Einstein’s relationship (Dp = nVT), In the following chapters, we will use these equations, combined with Gauss’ law, (E)=Q, to calculate currents in a variety of semiconductor devices.

  18. Semiconductor Energy Band Model Thermal energy breaks covalent bonds and moves the electrons up into the conduction band. Semiconductor energy band model. EC and EV are energy levels at the edge of the conduction and valence bands. Electron participating in a covalent bond is in a lower energy state in the valence band. This diagram represents 0 K.

  19. Energy Band Model for a Doped Semiconductor Semiconductor with donor or n-type dopants. The donor atoms have free electrons with energy ED. Since ED is close to EC, (about 0.045 eV for phosphorous), it is easy for electrons in an n-type material to move up into the conduction band. Semiconductor with acceptor or p-type dopants. The donor atoms have unfilled covalent bonds with energy state EA. Since EA is close to EV, (about 0.044 eV for boron), it is easy for electrons in the valence band to move up into the acceptor sites and complete covalent bond pairs.

  20. Energy Band Model for Compensated Semiconductor The combination of the covalent bond model and the energy band models are complementary and help us visualize the hole and electron conduction processes. A compensated semiconductor has both n-type and p-type dopants. If ND > NA, there are more ND donor levels. The donor electrons fill the acceptor sites. The remaining ND-NA electrons are available for promotion to the conduction band. HW: Reading and studying New Book: 3.1,3.2,3.3 Old Book: 2.3,2.4,2.5,2.6,2.7,2.8,2.9,2.10

More Related