1 / 32

The PEM Fuel Cells

The PEM Fuel Cells. Nafion Thermal Behavior. Silicon Oxide/Aciplex 1004. 130. o. C. Nafion 115. 1.0. 80. o. C. o. 130. C. 0.8. 0.6. Cell Potential / V. 0.4. 0.2. 0.0. 0. 200. 400. 600. 800. 1000. 1200. 1400. 1600. 1800. Current Density / mA cm 2.

Download Presentation

The PEM Fuel Cells

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. The PEM Fuel Cells

  2. Nafion Thermal Behavior Silicon Oxide/Aciplex 1004 130 o C Nafion 115 1.0 80 o C o 130 C 0.8 0.6 Cell Potential / V 0.4 0.2 0.0 0 200 400 600 800 1000 1200 1400 1600 1800 Current Density / mA cm2

  3. Is the Metal Oxide Phase Water Retentive? • The composite typically contains 3-6 wt% metal oxide. • TGA indicates the same water content and dehydration temperature for pure Nafion and the composite. • The conductivity of the composite measured in a mechanically unconstrained environment is the same or slightly worse than the conductivity of pure Nafion.  The metal oxide is not simply providing a water retentive or hydrated interface.

  4. If it’s not a question of direct dehydration, then what is occurring? • First, we will seek a molecular picture. • Then, we will attempt to make connections between our understanding of the molecular structure and bulk materials properties.

  5. Effect of Metal Oxide Identity on Membrane Performance 1.0 o 130 C (Degussa-Huls) 2 /g (R - 0.18) TiO ; 21nm; 50 m 0.8 2 2 SiO ; 20nm; 90 m /g (R - 0.21) 2 2 Al O ; 13 nm; 100 m /g (R - 0.76) Cell Potential / V 2 3 Recast Nafion Control (R - 0.5) 0.6 0.4 0.2 0 500 1000 1500 -2 Current Density / mA cm

  6. Interfacial Chemistry is Critical 1.0 (AA)/Recast Nafion; 130˚C TiO2 unmodified (R - 0.50) 0.8 silylated (R - 0.29) H SO , HNO , "degreased" (R - 0.25) 2 4 3 Cell Potential / V 0.6 0.4 0.2 0 200 400 600 800 1000 1200 1400 1600 -2 Current Density / mA cm

  7. The Effect of Relative Humidity on Recast Nafion

  8. 75% Relative Humidity 125µ Film 3 atm pressure 40 ml/min

  9. Potential Chemical Interactions -----CF----- -----CF----- SO3- HO O=S=O OH O Metal Oxide Metal Oxide Ti ----CF2-CF2--- OH OH Metal Oxide

  10. Temperature Programmed Decomposition (TG-MS) of Nafion 117 Thermal decomposition of Nafion C3F5+ 2nd step CFO+ - 1st step H2O H2O SO2 SO2 C3F5+ CFO+ H2O

  11. TG-MS Profile of Nafion/TiO2 Composite Membranes TiO2 Thermal decomposition of Nafion 3rd step C3F5+ 2nd step CFO+ - 1st step HO H2O SO2 C3F5+ CFO+ SO2 H2O

  12. TPD-MS profiles of Nafion/Inorganic composite membranes - SO2 (m/z 64) CFO (m/z 47) H2O (m/z 18) C3F5 (m/z 131)

  13. Molecular Model • Crosslinking controls the mechanical properties of the polymer • Glass transition temperature • Bulk rigidity – better water retention under stress load

  14. Dependence of Nafion Glass Transition on Metal Oxide

  15. SAXS Studies

  16. Order-Disorder Transition Crystalline Heat Disordered Self Assembled

  17. Membrane Mechanical Properties Affect Cell Response Ionic inclusions swell with water uptake, requiring the membrane to push the electrodes apart.

  18. Stress-Strain Response 6 5.5x10 6 5.0x10 ) 6 4.5x10 2 6 4.0x10 Metal Oxide Composite Nafion 112 6 3.5x10 Stress (N/m 6 3.0x10 6 2.5x10 6 2.0x10 6 1.5x10 6 1.0x10 5 5.0x10 0.0 0 20 40 60 80 100 120 140 160 180 200 Strain(%)

  19. Too Much of a Good Thing is Bad

  20. Membrane Swelling Carbon support The membrane is in contact with the catalyst support particles. membrane Applied pressure enhances the membrane/catalyst contact. Additional pressure further increases the membrane/catalyst contact. However, the larger pressure forces water out of the membrane.

  21. Hydrogen Crossover 1000 4.0 ) 2 950 3.0 900 2.0 Open Circuit Voltage (mV) Crossover Current (mA/cm 850 1.0 800 0.0 125µm 40µm Composite 40µm Membrane

  22. What Role Does the Metal Oxide Play? • Increased Tg allows maintenance of hydrated proton conduction paths at elevated temperatures. • Improved mechanical rigidity allows for dimensional stability under conditions where water content of the membrane may be changing. • Maintains good catalyst contact on deswelling • Eliminates water loss on swelling.

  23. Carbon Monoxide Tolerance o Nafion 115 - 80 C Pt Anode 1.0 w/o CO w/100 ppm CO 0.9 o TiO - 130 C Pt/Ru Anode 0.8 2 w/100 ppm CO w/500 ppm CO 0.7 Cell Potential / V 0.6 0.5 0.4 0.3 0.2 0 200 400 600 800 1000 1200 1400 1600 -2 Current Density / mA cm

  24. Summary • High Temperature Nafion Based PEM Fuel Cells overcome several limitations associated with current cell design • Addition of a metal oxide phase affects the mechanical properties of the membrane: • Increased Tg • Improved gas barrier • Mitigation of swelling/deswelling effects

  25. Bonus Material (It’s not electrochemistry, but it is interesting) So, How Does One Store Hydrogen on the Run?

  26. Safety For mobile applications range & power should be maintained. 5-10Kg of H2 needed for a 65-75kW engine. H2 feed rate is ~1000 liters/minute Weight Effective Density of Hydrogen Volume Requirements Size Geometry Refill Availability Recharge rate. Cost Storage Issues

  27. Hydrogen Storage Phases

  28. Storage Options • Standard steel tanks (2000-5000psi) • Known technology. • Good Safety Record • Subject to hydrogen imbrittlement • Forms projectiles if structure is breached • Tanks are challenging to fill because hydrogen heats upon expansion • Heavy • Storage capacity is only 0.5-1% by weight • Poor volumetric storage due to non-ideality of hydrogen:

  29. Storage Options • Composite Tanks (~10,000psi) • High storage capacity: • Light weight • Can store 7% H2 by weight! • Does not fragment upon failure • Cost

  30. Generation on the fly: in-situ or ex-situ reforming of hydrocarbon fuels using an on-site reformer. Energy density of gasoline Easy access to fuel (gasoline stations) Systems integration is poor No carbon mitigation. Solid-state storage by intercalation (metal hydrides, carbons) Safe Heavy Expensive Chemical thermodynamics and kinetics are difficult Significant heating is required to release the hydrogen ∆H losses up to 30% are typical with operating temperatures of 200-300C. Tank filling is very exothermic Chemical kinetics are a difficult to handle Storage Options

  31. Hydride Storage Capacity

  32. Chemical Hydrides “Hydrogen on Demand” (Sodium Borohydride) Not flammable High Effective hydrogen pressure (~7000psi) Low Volume Simple system Chemical Safety Recyclable Cost?? Storage Options

More Related