1 / 15

Common-Collector Amplifier

Common-Collector Amplifier. Section 5.3. Topics. Emitter Follower Core Effect of Transistor Output Resistance Emitter Follower with Biasing. Voltage Gain of Emitter Follower. Use a current source to implement RE. R E =infinity imples that A V =1.

patia
Download Presentation

Common-Collector Amplifier

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Common-Collector Amplifier Section 5.3

  2. Topics • Emitter Follower Core • Effect of Transistor Output Resistance • Emitter Follower with Biasing

  3. Voltage Gain of Emitter Follower

  4. Use a current source to implement RE RE=infinity imples that AV=1

  5. Thinking of an Emitter follower as a voltage divider

  6. Source Resistance Included

  7. Input Resistance

  8. Output Resistance RS is transformed to a smaller output resistance.

  9. Application of Common Collector Stage Av=-(RC||Rsp)/(1/gm) RSP=8 Ohms << RC AV=-RSP/(1/gm)

  10. Interpose a Emitter Follower between the CE Stage and the speaker CE stage: -(RC||Rin1)/(1/gm)

  11. Inclusion of Output Resistance

  12. Design Guideline • Specs: Av, rsp, v_re • gm=Av/(1-Av)/rsp • Calculate IC from gm. • Determine re from IC and V_RE • Calculate VBE. • Calculate VB. • Calculate IB from IC. • Assume that I1=40 IB • Calculate R2 from VB. • Calcualte R1

  13. Common-Collector Amplifier

  14. Vin,pp=2 mV Vout,pp=1.47 mV Av(ADS)=0.735 Av(matlab)=0.783

  15. Vin, m=1.71 V Need to adjust V_RE.

More Related