1 / 15

Common Source Amplifier

Common Source Amplifier. Outline. Current Source (Sec. 7.1) CS CS CS with Current-Source Load (Sec 7.2.2.) Design a CS with current-source load using gm/ID design flow. Current Source. Common Source Amplifier. Include Channel Length Modulation. CS Stage with Current-Source Load.

emiko
Download Presentation

Common Source Amplifier

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Common Source Amplifier

  2. Outline • Current Source (Sec. 7.1) • CS • CS • CS with Current-Source Load (Sec 7.2.2.) • Design a CS with current-source load using gm/ID design flow

  3. Current Source

  4. Common Source Amplifier

  5. Include Channel Length Modulation

  6. CS Stage with Current-Source Load

  7. Design Example • Requirement • 1 uA • Get a voltage gain of 30 • Initial assumptions • (gm/ID)1=20, (gm/ID)2=8 • VDS1=VSD2=0.6 V • VSB1=VBS2=0.6 V • Length=‘600nm’

  8. Design Exploration • Initial results • ro1=2.228 Mohms • ro2=5.32 Mohms • Av=-31.4 V/V • gmovergds1=44.57 • gmvoergds2=42.5

  9. Plot of gm/gds for M1 gm/gds gm/ID gmovergds=dBrowse2D(gmoverid, 'nfet', '1.0u', 'vds', 0.5, 0.6, 0.6, 'vsb', 0.0, 0.1, 0.0, 'gmovergds'); (Can not increase gm/gds by increasing by gmoverid)

  10. Increase gm/gds by using a longer L (Not much improvement!)

  11. gm/gds_1 for M2 (gm/gds) (gm/ID) gmovergds_2=dBrowse2D(gmoverid_2, 'pfet', length_2, 'vsd', 0.5, 0.6, 0.6, 'vbs', 0.0, 0.1, 0.0, 'gmovergds')

  12. DC Simulation

  13. Split Plots

  14. Waveforms shown Separately on Two Plots

More Related