1 / 49

Common Beekeeping Issues

What to do when you're

Download Presentation

Common Beekeeping Issues

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


    1. Common Beekeeping Issues

    2. What to do when you’re “freaked” "There are a few rules of thumb that are useful guides. One is that when you are confronted with some problem in the apiary and you do not know what to do, then do nothing. Matters are seldom made worse by doing nothing and are often made much worse by inept intervention." --The How-To-Do-It book of Beekeeping, Richard Taylor

    3. No brood, no eggs There are many reasons you might find a hive with no brood even though there is a queen.

    4. Why is the hive broodless? First, in my climate at least, from October to April there may or may not be brood because they stop in October and then raise little batches of brood with broodless periods in between. Second, some frugal bees will shut down brood rearing in a dearth. Third, a hive that has lost a queen and raised an emergency queen often is broodless because by the time the new queen has emerged, hardened, mated and started to lay 25 or more days have passed and ALL the brood has emerged. Fourth a hive can swarm and the new queen isn't laying yet. She won't be laying for probably two or three weeks after the hive swarmed.

    5. What not to do? Many a beginner (or even a veteran) has found a hive in this state, ordered a queen, introduced her and had her killed, ordered another queen, introduced her and had her killed and finally noticed there were eggs. Unmarked virgin queens are very hard to find..

    6. What to do? A frame of eggs and brood would have been a better solution. That way IF the hive is queenless they can raise one, and if they aren't it won't hurt anything and you'll know the answer to the question In fact a frame of eggs and open brood is the solution to many problems in a beehive especially when you’re not sure of the problem.

    7. All drone brood It’s normal to have up to 20% of the comb be drone comb and 20% of the brood (in the prime swarm season) to be drone. It is NOT normal to have all drone brood

    8. Causes The most likely causes are drone laying queens or laying workers.

    9. Drone laying queens A late mated queen will turn into a drone layer. Basically she will only lay unfertilized eggs. Despite this the bees will try to build queen cells which will, of course, fail because they have drone eggs in them. The symptom is lots of drone brood but not a lot of multiple eggs in a cell.

    10. Solution for Drone laying queen The easiest solution is to give them a frame of eggs. They will probably seize the opportunity you have now afforded, to supersede the old queen. If you can FIND the old queen and remove her before you do this, that’s fine, but a frame of brood will probably straighten things out. If it turns out it’s a laying worker it will just take two more frames a week apart.

    11. Laying workers Cause When the hive is broodless, often because it is queenless, for several weeks some workers develop the ability to lay eggs. It's not actually the lack of a queen, but the lack of brood. But the lack of brood is caused by the lack of a queen. These are usually haploid (infertile with a half set of chromosomes) and will all develop into drones.

    12. Symptoms Spotty brood Only brood is drones Drones in worker cells Multiple eggs in cells, usually three or more in each Multiple eggs on pollen and in shallow and drone cells (where the worker can reach)? Eggs on the sides of the worker cells

    13. Misleading Info Sometimes a queen, when she starts laying after a time of not laying, or when there isn’t a lot of room for her to lay will lay a few double eggs but she usually stops after a day or two. The laying workers will lay three or four to a cell in almost every cell.

    14. Solutions I’ve tried many solutions and have decided there are only a few that are worth the trouble.

    15. Shake Out For an outyard it’s simple, direct and always successful. You simply move all the equipment off the stand and shake all the bees on the ground and give the equipment to another hive. The bees drift to other hives. You now have one less hive, but no more laying worker problems. If you need another hive, do a split

    16. Open Brood The only other really practical method to actually save the colony, in my opinion, is to add a frame of open brood every week until they rear a queen. Usually by the second or third frame of open brood they will start queen cells. This is simple enough when the hive is in your backyard. Not so easy in an outyard 60 miles away.

    17. Queen cell Sometimes if you give them a queen cell they will accept the queen.

    18. Combine If you have two or three laying worker hives that are weak (especially nucs) and one strong hive to put them on, just putting them together usually works and saves shaking them out. But don’t put just one strong laying worker hive on a medium or weak hive as they will kill the queen.

    19. Myths Queenlessness causes laying workers This is only an indirect cause. It’s the lack of brood that causes it, which usually is caused by a lack of a queen. This is a significant difference and is the reason that open brood will resolve the issue.

    20. Page 11 of Wisdom of the hive: "the queen's pheromones are neither necessary nor sufficient for inhibiting worker's ovaries. Instead, they strongly inhibit the workers from rearing additional queens. It is now clear that the pheromones that provide the proximate stimulus for workers to refrain from laying eggs come mainly from the brood, not from the queen (reviewed in Seeling 1985; see also Willis, Winston, and Slessor 1990)." –Tom Seeley, Wisdom of the Hive

    21. Myth: There’s one laying worker There are always multiple laying workers even in a queenright hive "Anarchistic bees" are ever present but usually in small enough numbers to not cause a problem and are simply policed by the workers UNLESS they need drones. The number is always small as long as ovary development is suppressed.

    22. "All studies to date report far fewer than 1 % of workers have ovaries developed sufficiently to lay eggs (reviewed in Ratnieks 1993; see also Visscher 1995a). For example, Ratnieks dissected 10,634 worker bees from 21 colonies and found that only 7 had moderately developed egg (half the size of a completed egg) and that just one had a fully developed egg in her body." –Tom Seeley, Wisdom of the Hive

    23. Only one laying worker? If you do the math, in a normal booming queenright hive of 100,000 bees that's 70 laying workers. In a laying worker hive it's much higher.

    24. Myth: Shaking out will get rid of a laying worker because she can’t find her way back I have not found this to be true and the research I've read says it's not true. There are many of them and they will find their way back. Shaking out a hive only works at all because you have disheartened them enough that in the chaos they will sometimes accept a queen.

    25. Robbing Sometimes during a dearth the strong hives will rob the weak ones. Italians are particularly bad about this. Feeding seems to make this worse or sometimes set it off. Prevention is best. When you see that a dearth is setting in, reduce the entrances on all the hives, including the strong ones. This will slow them all down some. But you need to have an eye on them to see that the dearth is over and open them back up during a flow.

    26. Robbing I've noticed that queenless hives get robbed much more often than queenright hives. I had always thought it was because the robbers kill the queen, and they probably do, but when I make a nuc queenless in the fall just before I combine them with another nuc they seem to get robbed almost immediately

    27. Make sure they are being robbed Sometimes people mistake an afternoon orientation flight with robbing. Every warm, sunny afternoon during brood rearing you'll see young bees orienting. They will hover and fly around the hive. This is easily mistaken for robbers who also hover around a hive.

    28. How to distinguish robbing from young bees orienting Young bees are fuzzy. Young bees are calm compared to robbers. Look at the entrance. Robbers are in a frenzy. Local bees might have a traffic jam at the entrance but they will still be orderly. Wrestling at the entrance is pretty much a give away, but lack of fighting at the entrance does not prove they are not being robbed, it just proves they have overcome the guard bees. One SURE way to tell if they are being robbed is to wait for dark and close the entrance. Any bees in the morning who show up trying to get in are probably robbers.

    29. Stop them If you don’t stop the robbing as quickly as possible the hive will die.

    30. Stopping robbing A really weak hive can be closed up with some #8 hardware cloth for a day or two. The robbers can't get in and eventually get tired of trying. It helps if you can feed and water them. A little bit of pollen and a few drops of water will get a small nuc by. More will be required if there are more bees. After you open back up be sure to reduce the entrance. Another variation on confining them is to stop up the entrance with grass. The bees will eventually remove it, but hopefully the robbers will give up before then.

    31. Stopping Robbing Another emergency move is to cover the hive being robbed in a wet sheet. This tends to block all the entrances, keep the hive cool (so it won’t overheat) and confuse the robbers.

    32. Stopping Robbing I haven’t tried this one, but it’s recommended by Jim Fischer. Try removing ALL the covers from ALL the hives. This sets off nasonoving response which causes all the foragers to stay home. It also forces the strong robber hive to defend their own hive

    33. Stopping Robbing A “robber screen” can be built from scratch or from a screen door from Brushy Mt. It is a screen that covers the area around the door and has an opening in the top (you will have to make the whole affair or cut a notch in the wood of Brushy Mountain's screen door to make an entrance on the top.) This forces the robbers to turn a couple of corners to find their way in. Since they seem to go by smell this confuses them. It also stops skunks.

    35. Robber Screen Hive Side

    36. Smell Vicks Vaporub around the entrance will also confuse the robbers because they can't smell the hive. It does not confuse the bees that live there.

    37. Combine A weak hive will sometimes get totally robbed out so there is not a drop of honey left. They will quickly starve. If you can't control the robbing it's better to combine some of the weak hives than let them get robbed out and starve. If you only have one strong and one weak, you can steal some emerging brood from the strong hive to boost the weak hive and shake off some nurse bees (the ones on the open brood) from the strong hive in the weak hive. Or you can just combine the weak with the strong. It's better than all the fighting and starving.

    38. Finding queen cells I’m not sure why this is such a dilemma for new beekeepers but it seems to send them into a panic and based on the books they’ve read they instantly destroy the queen cells.

    39. Myth: Queen cells are bad and should be destroyed It seems like most of the books I've read convince beginners that queen cells should always be destroyed. The bees are either going to swarm, and you want to stop them, or they are trying to replace that precious store-bought queen with a queen of unknown lineage mated with those “awful” feral drones.

    40. Results of destroying queen cells Most of the time when you destroy queen cells the bees swarm anyway, or they already swarmed before you destroyed them, and they not only swarm, but also end up queenless. Destroying a supersedure cell is also likely to leave them queenless. The queen is probably about to fail, or she's already failed or died and you just removed their only hope of a queen..

    41. What to do? I see swarm cells as free queens of the highest quality. I put each frame that has queen cells on it, in it's own nuc. Usually I try to leave one with the original hive and the old queen in a nuc. That way I've made a bunch of small splits and left the hive thinking it's swarmed already. With supersedure cells, I leave them because the bees apparently have found the queen wanting and I have learned (the hard way) to trust the bees in such matters.

    42. Why do the bees mess up combs? Some of this is genetics. Some bees build straight parallel combs no matter what you do. Some will burr things up every which way no matter what you do. But there are things you can do to stack the deck.

    43. Why do they mess it up? Some of it is giving them the freedom to mess it up. Push all the frames tightly together. Those spacers on the frames are there for a reason. Use them. Do not space the frames evenly in the box. When you have undrawn foundation, do NOT space less frames in a box. Bees, if they don't like your foundation (and they never do really) and if you give them the room (by spacing the combs more than 1 3/8" apart) will try to build a comb between two frames rather than build it on your foundation. So pushing it together makes the space between the foundations small enough to discourage this, as it's not enough room for a brood comb.

    44. Why do they mess it up? Some of it is that they don't like you deciding their cell sizes etc. They will build their own comb with much more enthusiasm than they will build foundation. So they try to avoid building on the foundation. One solution is to stop using foundation and go foundationless. Another is to get foundation that is closer to what they wanted to build. 5.4mm standard foundation is much larger than typical natural worker brood comb. 4.9mm is closer.

    45. Why do they mess it up? They usually don't like plastic much. The solution to getting them to draw it is to give it to them when they need to draw comb. Don't give them wax foundation mixed with plastic foundation or they will ignore the plastic and draw the wax. Buy the wax coated plastic so they will accept it better. Spray some syrup on it or syrup with essential oils like Honey Bee Healthy, to cover the smell of the plastic. Once they've licked it clean they tend to accept it better. Sometimes they will still mess it up no matter what you do.

    46. What to do with an out of place comb? If the comb is of significant size, and especially if it’s brood, I cut them loose and put them in a empty frame held in with rubber bands around the frame. If they are small, I just scrap them. If they are too heavy with nectar, I just scrap them.

    47. Why are there bees on the outside of my hive? Typically we call this bearding because it often looks like the hive has a beard. Causes are heat, congesting and lack of ventilation. Make sure they have room and ventilation and don't worry about it. Bee's bearding is like people sweating. It's what bees do when they are hot.

    48. What to do? It's good to cover the bases and then accept it. If you were sweating you'd take what steps were reasonable (turn on the fan, open the window, take off your sweater, drink lots of water) and then you'd accept that it's just hot. With the bees, make sure they have top and bottom ventilation, (open the bottom entrance, remove the tray if you have a SBB, prop open the top box, slide a super back to make a gap) make sure they have enough room (put supers on as needed) and don't worry about it. Bearding is not proof they are about to swarm. It's proof they are hot. I think lack of ventilation contributes to an "overcrowding swarm" but it's not the only cause and it's nothing to be concerned about if you've taken care of the bees having ventilation and room.

    49. More Info There is more information on all of these and many other topics on my web site at www.bushfarms.com If you don’t find the subject on the main menu, try “Beekeeping Fallacies” or “Frequently Asked Questions”.

    50. Contact Michael Bush bees at bushfarms dot com www.bushfarms.com

More Related