1 / 19

MILANO COLORI – Prodotti per vernici in polvere

MILANO COLORI – Prodotti per vernici in polvere. Ningbo South Sea Chemical Co.Ltd. Ningbo South Sea Chemical Co. Ltd Nazione: Cina Anno di fondazione: 1985 Dipendenti: 160 Vendite: 200 M USD Certificazioni qualità: ISO 9001 (2000) – ISO 14001 (2004) Gamma: 1) Indurenti

nicki
Download Presentation

MILANO COLORI – Prodotti per vernici in polvere

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. MILANO COLORI – Prodotti per vernici in polvere

  2. Ningbo South SeaChemicalCo.Ltd • Ningbo South Sea Chemical Co. Ltd • Nazione: Cina • Anno di fondazione: 1985 • Dipendenti: 160 • Vendite: 200 M USD • Certificazioni qualità: ISO 9001 (2000) – ISO 14001 (2004) • Gamma: • 1) Indurenti • Amidine per vernici in polvere epossidiche o ibride • Beta Hydroxyalkylamide (Beta HAA) per vernici in polvere poliestere • 2) Agenti opacanti • 3) Agenti livellanti e degasanti MILANO COLORI S.R.L.

  3. Ningbo South SeaChemicalCo.Ltd – Sistemi epoxy • MATT HARDENER XG603-1A = VESTAGON B68 • MATT HARDENER XG603-1A NEW = 1A cost effective version • MATT HARDENER XG603-2A = VESTAGON B55 • Newly launched XG620A = non yellowing version of VESTAGON B 68 Indurenti per sistemi epossidici per temperature di cottura > 170°C MILANO COLORI S.R.L.

  4. Ningbo South SeaChemicalCo.Ltd Ningbo South Sea Chemical Co. Ltd MILANO COLORI S.R.L.

  5. Ningbo South SeaChemicalCo.Ltd – Sistemi epoxy Confronto XG620A vs XG6031A Minor tendenza all’ingiallimento con XG620 A MILANO COLORI S.R.L.

  6. Ningbo South SeaChemicalCo.Ltd – Sistemi epoxy Confronto XG620A vs XG6031A Maggior efficienza matting con XG620 A MILANO COLORI S.R.L.

  7. HefeiKetaiChemical Co. Ltd. • Hefei Ketai Chemical Co. Ltd • Creata dal dott. Zhou nel 2004 nasce da una costola della Ningbo South Sea Chemical • Gamma: • 1) Indurenti: Amidine per vernici in polvere epossidiche o ibride • 2) Agenti opacanti • 3) Agenti livellanti e degasanti MILANO COLORI S.R.L.

  8. HefeiKetaiChemical Co. Ltd. MILANO COLORI S.R.L.

  9. HefeiKetaiChemical Co. Ltd. – Gamma Prodotti MILANO COLORI S.R.L.

  10. HefeiKetaiChemical Co. Ltd. – Opacanti per sistemi ibridi e HAA Confronto con i benchmark DT 3329 Huntsman Hybryd / Primid Formulations DT 3357 Huntsman Hybrid Formulations DT 3360 Huntsman Hybrid Formulations DT 3330 Huntsman PT912 Formulations DT 125 Huntsman Hybrid / Primid Formulations MILANO COLORI S.R.L.

  11. HefeiKetaiChemical Co. Ltd. – HybridFormulation (50/50) – Dosaggio 1% Gloss 20 ° Confronto con i benchmark MILANO COLORI S.R.L.

  12. HefeiKetaiChemical Co. Ltd. – HybridFormulation (50/50) – Dosaggio 5% Gloss 20 ° Confronto con i benchmark MILANO COLORI S.R.L.

  13. HefeiKetaiChemical Co. Ltd. – HybridFormulation (50/50) – Dosaggio 1% Gloss 60 ° Confronto con i benchmark MILANO COLORI S.R.L.

  14. HefeiKetaiChemical Co. Ltd. – HybridFormulation (50/50) – Dosaggio 5% Gloss 60 ° Confronto con i benchmark MILANO COLORI S.R.L.

  15. HefeiKetaiChemical Co. Ltd. – Polyester/Primid DT= 1% Gloss 20°/60 ° (KT 188) Confronto con i benchmark MILANO COLORI S.R.L.

  16. HefeiKetaiChemical Co. Ltd. – Polyester/Primid DT= 5% Gloss 20°/60 ° (KT 188 usato come opacante) Confronto con i benchmark MILANO COLORI S.R.L.

  17. HefeiKetaiChemical Co. Ltd. – Polyester/PrimidFormulation (KT 188) Formulazione MILANO COLORI S.R.L.

  18. HefeiKetaiChemical Co. Ltd. – Opacanti per sistemi ibridi e HAA • Risultati • Prodotti adatti per diversi tipi di formulazioni • In generale più efficienti rispetto al benchmark • Senza influenza su ingiallimento • Notevole effetto matt con KT 188 usato come opacante in sistemi poliestere/primid MILANO COLORI S.R.L.

  19. Matting agent KT108G for hybrid General: KT108G is a wax free matting agent based on polyacrylaye for hybrid system, providing the properties of color stable, gloss reduction down to 5% range in the formulation. KT108G is also an effective matting additive where no adjustment of epoxy to polyester ratio is needed. Typical properties Appearance white to yellowish powder Bulk density g/cm3 0.5～0.55 Flash point℃ ＞280 Softing point℃ NA Processing KT108G is just added to the starting formulation for extruding ,thoroughly premixing of all ingredients is very necessary. Formulation guideline The gloss level will be influenced by the selection of the polyester and the amounts of matting agent KT108G. The more dosage of KT108G, the lower the gloss level will be, the increasing level of KT108G almost doesn’t influence the gel time, so the important step for formulation is to choose the right polyester which influence the final gloss level, In the formulation , resins for 50/50 and 60/40 are preferred , but the combination of different polyester resins with different acid value will be better and more economical . Baking temperature for KT108G is from 180℃ to 200℃ for 15～10 min . for thorough curing. Packaging & storage Matting agent KT108G is supplied in 25 Kg bag . This product should store at room temperature in dry place , please seal the bag after use for prevention of moisture entering . HefeiKetaiChemical Co. Ltd. – Opacanti per sistemi ibridi e HAA Matting agent KT108G for hybrid General: KT108G is a wax free matting agent based on polyacrylaye for hybrid system, providing the properties of color stable, gloss reduction down to 5% range in the formulation. KT108G is also an effective matting additive where no adjustment of epoxy to polyester ratio is needed. Typical properties Appearance white to yellowish powder Bulk density g/cm3 0.5～0.55 Flash point℃ ＞280 Softing point℃ NA Processing KT108G is just added to the starting formulation for extruding ,thoroughly premixing of all ingredients is very necessary. Formulation guideline The gloss level will be influenced by the selection of the polyester and the amounts of matting agent KT108G. The more dosage of KT108G, the lower the gloss level will be, the increasing level of KT108G almost doesn’t influence the gel time, so the important step for formulation is to choose the right polyester which influence the final gloss level, In the formulation , resins for 50/50 and 60/40 are preferred , but the combination of different polyester resins with different acid value will be better and more economical . Baking temperature for KT108G is from 180℃ to 200℃ for 15～10 min . for thorough curing. Packaging & storage Matting agent KT108G is supplied in 25 Kg bag . This product should store at room temperature in dry place , please seal the bag after use for prevention of moisture entering . MILANO COLORI S.R.L.

More Related