1 / 29

PUMPING 101 – TASK 2

PUMPING 101 – TASK 2. AFFINITY LAWS, FRICTION HEAD AND SYSTEM CURVES. PUMPING 101 – UNIT 2. PUMP AFFINITY LAWS. Efficiency. Pump Operation. Constant speed example. Pump Affinity Laws.

neveah
Download Presentation

PUMPING 101 – TASK 2

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. PUMPING 101 – TASK 2 AFFINITY LAWS, FRICTION HEAD AND SYSTEM CURVES

  2. PUMPING 101 – UNIT 2 PUMP AFFINITY LAWS

  3. Efficiency Pump Operation Constant speed example

  4. Pump Affinity Laws • FLOW changes DIRECTLY as a change in speed or diameter* • HEAD changes as the SQUARE of a change in speed or diameter* • HORSEPOWER changes as the CUBE of a change in speed or diameter * May not be true for higher specific speeds

  5. Pump Affinity Laws Important… Remember these:

  6. Pump Affinity Laws FLOW HEAD POWER %SPEED

  7. Efficiency Impeller Diameter Change Impact on Efficiency

  8. PUMPING 101 – TASK 2 SYSTEM FRICTION

  9. Friction of Water Velocity Chart and Friction of Water (new steel pipe) at 60° F 1 inch Source: Grundfos Technical Guide L-TG-PG-001

  10. Friction of Water Asphalt-dipped Cast Iron and New Steel Pipe (Based on Darcy’s Formula) 8 inch Pipe aging?

  11. Friction in Fittings Velocity Chart & Friction of Water Source: Grundfos Technical Guide L-TG-PG-001 The friction loss through one 1¼ inch standard 90° elbow is equal to the friction loss through how many feet of straight 1¼ inch pipe? These are NOT friction values!!! 3.6 ft

  12. S D Friction Head 17 ft. 10 gpm thru 250 ft – 1” Sched. 40 steel pipe 250 100 6.81 17 • What is the friction head in feet? • What is the pressure head in feet? • What is the elevation head in feet? • What is the total head? (4 = 1+2+3) 0 ft. 0 ft. 17 ft.

  13. Calculating Horsepower

  14. Where do we get “3960”? 1HP = 550Foot Pounds per Second x 60 Seconds per Minute 33,000Foot Pounds per Minute ÷ 8.333 Pounds per Gallon of Water 3960

  15. Practice Problems What is WHP(P3) for a pump moving 200 gpm of 60°F water against a TDH of 500’? (200 gpm X 500 feet) ÷ 3960 = 25.25 WHP

  16. Practice Problems What is BHP(P2) if the efficiency of the pump is 83%? 25.25 WHP ÷ 0.83 = 30.42 BHP

  17. Practice Problems What is EHP(P1) if the efficiency of the motor is 90%? 30.42 BHP ÷ 0.90 = 33.81 EHP(WWE)

  18. Practice Problems What is kW value if the WWE of the pump is 33.81? 33.81 WWE X 0.746 = 25.21 kW

  19. Practice Problems Calculate Energy Cost: 25.21 kW x 1000 hours per year 25,210kW/hrs per year x $0.10 per kWh $2,521.00 cost per year

  20. PUMPING 101 – TASK 2 SYSTEM CURVES

  21. System Curves Open System w/ Static Head Statichead Hf Totalhead System Head (Hspf) HEAD (FT.) OR PSI Hp Suctionlift Hs FLOW (GPM)

  22. Creating a System Curve

  23. Creating a System Curve Graph the head required through point for 50’ Equivalent Length of 2” Type L Copper Tubing for the following flows: .145 0.58 1.31 • 2.32 • • 3.65 • • •

  24. Creating a System Curve • Graph the head required through point for 200’ Equivalent Length of 2” Type L Copper Tubing for the following flows: .58 • 2.32 5.14 • 9.28 • 14.60 • •

  25. Creating a System Curve

  26. System and Pump Curves Operating Point • Operating point • Duty point • Options Duty Point

  27. Questions What are the Pump Affinity Laws? FLOWchanges DIRECTLY as a change in speed or diameter HEAD changes as the SQUARE of a change in speed or diameter HORSEPOWERchanges as the CUBEof a change in speed or diameter

  28. Questions What IS WWE? WWE is a calculation of the efficiency of pumping a liquid including corrections for Specific Gravity, Pump Efficiency, Motor Efficiency, and VSD Efficiency (if included) WWE = FlowxHead xSP GR / 3960 xEpxEmxEvsd

  29. www.grundfos.com

More Related