Trimble Site Positioning Systems

1. TrimbleSite Positioning Systems SPS GNSS Receiver Portfolio

2. Why Purchase a GNSS Receiver? • 2 simple reasons • As a base station to support site positioning rovers and machine control • As a rover for site measurements, stakeout, grade checking, and volume calculations supporting all types of projects including site, road, rail, mining, and marine.

3. Why Purchase a Trimble GNSS Receiver? • Flexible uses on a Construction Site • As a base station • As a site postioning rover • Integrated with SCS900 field software in Trimble rugged controllers • General Site Measurement and Stakeout tasks for site, road, rail, marine, and earthwork projects • Internet Base Station Service (IBSS) - extend its capability for use on larger projects with more uptime • Satisfies most positioning tasks over a large site • Supports on machine guidance control • Supports site supervisor, grade checker

4. Where Is The ROI From GNSS Receivers? • Productivity Gains • GNSS is a proven technology for site works and on machine tasks. • Trimble GNSS receivers track more satellites at the base and the rover, initialization is faster, losses of lock fewer in harsh environments • Accuracy • Purchase the accuracy required for the task. The Precision RTK accuracy help you to push construction tolerances, saving on expensive materials on each and every project • Labor Saving • operation allow you to work with fewer personnel, one person can do the job of two allowing teams to work more effectively • SCS900 Software • Improved data management, instant reporting, faster data preparation and data analysis and processing – increases efficiencies throughout the project

5. SPS GNSS Receiver • Base Station • Daily setup – portable nature on tripod legs • Permanent installation for duration of project • Connected to Internet by cable or cellular modem and / or radio transmitter • Rover • Pole mounted or in back pack – hand held by Grade Checker • ATV – All terrain vehicle for rapid topo • Vehicle mounting – for the Site Supervisor • Marine – vessel mounted with single or dual antennas

6. Base Station Setups

7. Rover and Site Supervisor Setups

8. SPS882 GNSS Smart Antenna Scalable accuracy modes Tracks GPS, GLONASS, GIOVE, SBAS ‘Portable’ base or Rover Bluetooth or serial to SCS900 Controller Internal wideband 410-470 MHz or licence free 900MHz Removable 2.4 Ah battery

9. Value Proposition Why does someone buy the SPS Smart GNSS Receiver? As a portable GNSS Base Station As a Precise Rover Provides 3D position control for Machine Control and Site Positioning applications Can provide 3D control on large projects Flexibility of use – can be a rover or a base station Can be used as a quick to establish reference station for daily work Is reliable, easy to setup, easy to manage Easy to use, single unit with internal receive and transmit radio, GNSS receiver, antenna all in one A high accuracy multi purpose rover for pole use, ATV, Vehicle With SCS900 on TSC2 or Tablet or with SCS700 on TCA1, user has powerful yet simple tools to manage day to day operations and resolve problems quickly when they arise – saves time and rework To increase their productivity to carry out or manage a project Empowers the supervisor to run the job in the absence of stakes User can monitor the state of site construction and document each stage

10. SPS882 GNSS Smart Antenna

11. SPS852 GNSS Modular Receiver Supports base, rover, rugged and Beacon antennas Scalable accuracy modes – Location through to Precision Flexible interfacing – Bluetooth, Internet, Serial Heading Add On GNSS receiver for heading Marine rover use – Beacon up to Precision. Single or dual antennas Semi permanent base station or rover GNSS capable Internal wideband 410-470 MHz or licence free 900MHz, or external cellular modem Internal battery for 12 hour operation

12. Value Proposition Why does someone buy the SPS Modular Receiver? As a GNSS Base Station As a Supervisor System Location GNSS Rover As a Precise Rover As a Systems Integration box or Marine rover Provides 3D position control for Machine Control and Site Positioning applications Can provide 3D control on large projects via IBSS – over long ranges (saves cost) Can be used as a reference station in a VRS network Is reliable, easy to setup, easy to manage, does not need a controller Easy to use, modularity ideally suited to in vehicle use or vessel use Range of antennas suits a rugged or non rugged requirement A high accuracy multi purpose rover for backpack, ATV, Vehicle or simple machine control usage With SCS900 on TSC2 or Tablet or with SCS700 on TCA1, user has powerful yet simple tools to manage day to day operations and resolve problems quickly when they arise – saves time and rework To increase their productivity to carry out or manage a project Empowers the supervisor to run the job in the absence of stakes User can monitor the state of site construction and document each stage

13. SPS852 GNSS Modular Receiver

14. Operating Modes • Precision RTK • Use the Real Time Kinematic (RTK) technique • The SPS receivers can operate in these modes • Precision GNSS base station • Precision GNSS rover • Precision GNSS base and rover • Using either a single base station or a Virtual Reference Station (VRSTM) system

15. Operating Modes • Location GNSS • Location GNSS (10/10) Rover • Location GNSS (10/2) Rover

16. Communication Technologies • Transmitting and receiving GNSS corrections • Internal Wideband UHF 410-470 MHz radios • Internal Licence Free 900 MHz radios • Internet via Cellular Modems • Use a single base station – Internet Base Station Service • Or use Virtual Reference Station (VRS) • Use the clip on SNM910 cellular modem for Modular GNSS • Use the TDL 3G – cellular mode, WiFi, Bluetooth for Smart Antenna • Bluetooth • Cable free to Controllers

17. Internet Base Station Service - IBSS • Single base station contractor owns • Can transmit corrections onto site by radio. No cell charges • Then use Cellular Modems for sites where radios are not suitable or in radio black spots or longer ranges • Internet connectivity via cell modems in controller or on belt • Register the base station on Trimble Connected Community (TCC) for effortless connectivity

18. Virtual Reference Station (VRS)

19. Value Proposition IBSS The Base station is under contractors control Its easy to register via TCC saving IT challenges Use Base station radio transmitter for site operations – no cell costs Swap to Internet connectivity in black spots or longer range VRS No need to purchase base stations Benefits of real time quality checking by provider Greater accuracy at longer range from base stations Public VRS – free or low cost VRS’s have no liability to maintain the service 24/7

20. Site Management with SPS GNSS Site Positioning Data Preparation Site Calibration Site Measurements Utilities Progress Checking As Builts Reports & QA Machine Control Earthmoving Single or multiple machines on site

21. GNSS for Machine Control Trimble SPS GNSS Base Stations for Machine Control 24/7 operation – fog, night time No line of sight restrictions 30 kms + from Base Station Base station can be located in safe and secure location Accurate dynamic positioning Use it for a wide variety of on site and offsite uses

22. Controllers Trimble Tablet with SCS900 TCA1 with SCS700 TSC3 with SCS900

23. SCS900 Field Software • Modules Available • Site Module • Road Module • Advanced Measurement Module (SCS700) • Modes Available • Basic mode • Full Feature Mode SCS900 Site Controller Software Note For TSC2 and TCU Controllers SCS700 Site Controller Software Note For TCA1 Controller SCS900 Site Controller Software – Trimble Tablet Edition Note For Trimble Tablet Controller

24. Value Proposition of Trimble SPS GNSS • Easy to integrate and fast to mobilize • Easy to manage a fleet of equipment • Same components and interchangeable accessories • Rugged, tough and durable • Built to withstand the toughest conditions and last a long time • Full solution systems or sensors only for integration • Easy to duplicate settings across a fleet • Settings cloning • Scalable and very flexible – multiple positioning technologies in the same box

25. Supporting Materials SPS Series GNSS Online User Guide Via Web User Interface or directly from an Internet Browser SCS900 Precision GPS User Guide Via Web User Interface or directly from an Internet Browser Specification Data Sheets Client Stories – read them in Trimble Productivity (www.trimble.com)

26. Questions? Thank You