1 / 9

Now Some Implications of Deformation Models & Seismicity Observations…

Now Some Implications of Deformation Models & Seismicity Observations…. Moment Rates (10 19 Nm/ yr ). Increase on faults comes from addition of new faults; old faults came down a bit 57% of new fault increase is from three of the new faults.

navid
Download Presentation

Now Some Implications of Deformation Models & Seismicity Observations…

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Now Some Implications of Deformation Models & Seismicity Observations…

  2. Moment Rates (1019 Nm/yr) Increase on faults comes from addition of new faults; old faults came down a bit 57% of new fault increase is from three of the new faults. • Include creep-based moment-rate reductions (default = 0.1). • 57% of Geologic on-fault increase (0.31) is from: Cerro Prieto (0.077  1019 Nm/yr); Mendocino (0.054  1019 Nm/yr); and Brawley (Seismic Zone) alt 1 (0.049  1019 Nm/yr). • On-fault moment rate change for the same faults as used in the UCERF2 model. • UCERF2 value includes both “C-Zones (aseismic)” and “Non-CA Faults” (treated as off fault here). • Relative to the UCERF2 total value of 2.37 1019 Nm/yr, which includes contributions from “C-Zones (aseismic)”. • Assuming a truncated GR distribution with 8.7 M  5 events per year (Appendix L) and a b-value of 1.0

  3. Moment Rates (1019 Nm/yr) Off-fault increases are from 11% to 45% These off-fault moment rates are not used to constrain UCERF3 (but rather provide an implied off-fault aseismcity) • Include creep-based moment-rate reductions (default = 0.1). • 57% of Geologic on-fault increase (0.31) is from: Cerro Prieto (0.077  1019 Nm/yr); Mendocino (0.054  1019 Nm/yr); and Brawley (Seismic Zone) alt 1 (0.049  1019 Nm/yr). • On-fault moment rate change for the same faults as used in the UCERF2 model. • UCERF2 value includes both “C-Zones (aseismic)” and “Non-CA Faults” (treated as off fault here). • Relative to the UCERF2 total value of 2.37 1019 Nm/yr, which includes contributions from “C-Zones (aseismic)”. • Assuming a truncated GR distribution with 8.7 M  5 events per year (Appendix L) and a b-value of 1.0

  4. Deformation Model Moment Rates UCERF2 (2.1) Geologic ABM NeoKinema Zeng UCERF3 Ave 17 10 On fault Mo Rate (Nm/yr) 15 10 Off Fault Total 13 10 +2 log10(Ratio) Ratio to U3 Ave -2

  5. Moment Rates Average Deformation Model UCERF2 Smooth Seismicity Implied UCERF3 Smooth Seismicity Implied (Geologic, Zeng, ABM, & NeoKinema) (Assuming same total moment rate as for Ave DefMod & constant Mmax and b-value) log(Moment Rate)

  6. Smooth Seismicity Divided By Ave Deformation Model UCERF2 UCERF3 log10(ratio)

  7. Smooth Seismicity Divided By Ave Deformation Model • Temporal rate changes • orange/red areas are more active (& green/blue less active) in recent times • Inadequate Declustering • under declustered in orange/red areas (& over declustered in green/blue areas) • Aseismicity • green/blue areas are more aseismic (at least at lower mags); this can’t explain orange/red areas (and we wouldn’t see aseis that only influences larger events like on Creeping SAF) • Mmax Variability • orange/red areas have lower Mmax & green/blue areas have higher Mmax • b-value Variability • orange/red areas have higher, & green/blue have lower b-value • Char MFDs On Faults • where faults appear green/blue; rest of region would need to be a bit more orange/red. • Undetected Earthquakes • in green/blueareas • No real significant differences (given uncertainties in both)? UCERF3 UCERF2 Assumptions log10(ratio)

  8. Smooth Seismicity Divided By Ave Deformation Model • Temporal rate changes • orange/red areas are more active (& green/blue less active) in recent times • Inadequate Declustering • under declustered in orange/red areas (& over declustered in green/blue areas) • Aseismicity • green/blue areas are more aseismic (at least at lower mags); this can’t explain orange/red areas (and we wouldn’t see aseis that only influences larger events like on Creeping SAF) • Mmax Variability • orange/red areas have lower Mmax & green/blue areas have higher Mmax • b-value Variability • orange/red areas have higher, & green/blue have lower b-value • Char MFDs On Faults • where faults appear green/blue; rest of region would need to be a bit more orange/red. • Undetected Earthquakes • in green/blueareas • No real significant differences (given uncertainties in both)? Implied Mmax if both deformation models and smoothed seismicity are correct (assuming GR) UCERF3

  9. Now General Discussion

More Related