1 / 15

How to extrude from existing material with associative constraints

How to extrude from existing material with associative constraints. Create new plane on face Sketch Draw Dimension (Optional) constrain Generate Extrude Select sketch Select add or cut material Set depth and direction Generate. Click 1 2 3 4. 4. 2. 1. 3.

natala
Download Presentation

How to extrude from existing material with associative constraints

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. How to extrude from existing material with associative constraints • Create new plane on face • Sketch • Draw • Dimension • (Optional) constrain • Generate • Extrude • Select sketch • Select add or cut material • Set depth and direction • Generate CAE/FEM supplemental slides Arizona State University

  2. CAE/FEM supplemental slides Arizona State University

  3. CAE/FEM supplemental slides Arizona State University

  4. Click 1 2 3 4 4 2 1 3 CAE/FEM supplemental slides Arizona State University

  5. In modeling select the new plane.Switch to sketching and draw the sketch. CAE/FEM supplemental slides Arizona State University

  6. Dimension to edge: Click 1 2 3 4 5 1 2 4 3 5 Right click dimension name to delete mistake CAE/FEM supplemental slides Arizona State University

  7. (Optional) Another approach: symmetry constraints 1 2 3 CAE/FEM supplemental slides Arizona State University

  8. (Optional) Another approach: symmetry constraints 1 2 3 CAE/FEM supplemental slides Arizona State University

  9. 4 5 1 2 (line) 3 (pt) Constraining the reference line Note constrained objects turn blue CAE/FEM supplemental slides Arizona State University

  10. 4 1 3 2 Applying symmetry constraint Note constrained objects turn blue CAE/FEM supplemental slides Arizona State University

  11. 1 3 2 4 Creating extrude feature Note: hard to select lines out of a sketch. Best to extrude the whole sketch. Make multiple sketches if needing different features. CAE/FEM supplemental slides Arizona State University

  12. Check or modify Direction, Depth, then Generate CAE/FEM supplemental slides Arizona State University

  13. Edit constraints and dimensions till Done! CAE/FEM supplemental slides Arizona State University

  14. Note 1 • Sketching>Modify>Trim to remove mistakes. • Sketching>Details>Show constraints. Occasionally you may want to delete inferred constraints. • Click the “select mode” button to escape zoom commands. CAE/FEM supplemental slides Arizona State University

  15. Note 2: can create “named selections” to speed up repeated selection process in Setup 2 1 4 3 5 CAE/FEM supplemental slides Arizona State University

More Related