1 / 31

MAS.961 Special Topics: How To Make Something That Makes (almost) Anything NanoFabrication

MAS.961 Special Topics: How To Make Something That Makes (almost) Anything NanoFabrication. J. Jacobson – MIT – 02/17/09 jacobson@media.mit.edu. Outline. Optical Fabrication Technologies Probe/MEMS Fabrication Technologies Imprint Fabrication Technologies

murrayjohn
Download Presentation

MAS.961 Special Topics: How To Make Something That Makes (almost) Anything NanoFabrication

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. MAS.961 Special Topics:How To Make Something That Makes (almost) Anything NanoFabrication J. Jacobson – MIT – 02/17/09 jacobson@media.mit.edu

  2. Outline • Optical Fabrication Technologies • Probe/MEMS Fabrication Technologies • Imprint Fabrication Technologies • Particle Beam Fabrication Technologies

  3. Immersion Lithography 22-nm immersion interference lithography T. M. Bloomstein, M. F. Marchant, S. Deneault, D. E. Hardy, and M. Rothschild 10 July 2006 / Vol. 14, No. 14 / OPTICS EXPRESS 6434 Received 11 May 2006; revised 23 June 2006; accepted 23 June 2006

  4. Immersion Lithography (Air) (Liq)

  5. Stereolithography Speed Resolution – Two Photon

  6. Laser CVD Mechanism: Pyrolitic (Heating in absense of O2) Chemical Vapor Deposition (500 to 2000°C local temperature). Rates: Fiber growth rates > 2 mm/s,metals and ceramics. Linear growth rate of 200 mm/s Carbon volumetric deposition rate of 50 mm3/s carbon. Materials: Cu, Au, Si, Al, W, C, WC, B, TiC, TiN, SiC, and Si3N4. http://www.me.gatech.edu/Lackey/nsfgranteesjan02.pdf

  7. LENS (Laser Engineered Net Shaping) www.optomec.com

  8. Outline • Optical Fabrication Technologies • Probe/MEMS Fabrication Technologies • Imprint Fabrication Technologies • Particle Beam Fabrication Technologies

  9. Dip-Pen Nanolithography Mirkin et. al.

  10. Contact Mode Nanoparticle AFM Hubert et.al.

  11. Massively Parallel Dip-Pen Nanolithography with 55 000-Pen Two-Dimensional Arrays http://mass.micro.uiuc.edu/research/current/nanolithography/2006-focus-intro/slide12.html

  12. Solder Jet 25 micron resolution http://www.microfab.com/research_areas/electronics/electronics.htm#anchor250555

  13. Outline • Optical Fabrication Technologies • Probe/MEMS Fabrication Technologies • Imprint Fabrication Technologies • Particle Beam Fabrication Technologies

  14. Cost Per Resolution Element The Case for Printed Electronics …Can we use this map as a guide towards future directions in fabrication?

  15. Imprint Lithography Stephen Chou (Michigan/Princeton) et. al.

  16. Step & Flash Lithography http://www.molecularimprints.com/Technology/technology2.html

  17. MultiLayer Step and Flash Lithography Emerging Lithographic Technologies X, edited by Michael J. Lercel, Proc. of SPIE Vol. 6151, 61510J, (2006) · 0277-786X/06/$15 · doi: 10.1117/12.655604 Proc. of SPIE Vol. 6151 61510J-1

  18. HP – Self Aligned Imprint Lithography - SAIL

  19. 2 mm 200 nm Offset Liquid Embossing (OLE) Nanoparticle Inks Bulthaup et. Al. APL 79(10): 1525 (2001)

  20. Nanomoulding with Amorphous Metals Golden Kumar, Hong X. Tang & Jan Schroers Vol 457| 12 February 2009| doi:10.1038/nature07718

  21. Outline • Optical Fabrication Technologies • Probe/MEMS Fabrication Technologies • Imprint Fabrication Technologies • Particle Beam Fabrication Technologies

  22. Focused Ion Beam FEI Corp.

  23. Focused Ion Beam - Milling NanoLathe FIB Fabricated Stamps http://www.siint.com/en/technology/ion_beam_applications_e.html Toshiaki Fujii, and Takashi Kaito

  24. Au contact pad Pt Pt nanowire SiO2 Pt Focused Ion Beam - Writing FIB Fabricated MOSFET FIB Pt CVD FIB CVD Pt (gate electrode)

  25. E Beam Metal Melting ARCAM.Com

  26. Electrospinning http://www.che.vt.edu/Wilkes/electrospinning/electrspinning.html https://www.uni-marburg.de/fb15/ag-wendorff/research/Electrospinning/fiber-hair http://en.wikipedia.org/wiki/Electrospinning

  27. 1D and 2D Composites

  28. Notes

  29. Objet: Ink Jet + UV Cure 16 micron layers http://www.2objet.com

More Related